CADENZA™
WHIRLPOOL
HIGH GLOSS
CADENZA™ WHIRLPOOL
❏ 6060.028WC Whirlpool featuring System II
• Acrylic with fiberglass reinforcement
• EverClean® System
• Pre-leveled tub bottom
• Two person design with center drain and dual
lumbar ends
• Molded-in seat
• Wave style grab bar
• 2.1 HP, two speed, self-draining pump/motor
with pulse feature
• Factory installed power cord and plug
• Ten multi-directional and flow-adjustable
jets including:
- Two Ideal-flow jets
- Six body massage jets
- Two recessed back-rest jets
• Deck-mounted electronic control with 20 minute
built-in timed safety shut off and Chrome Bezel
• Three silent air volume controls
• Factory installed Safe-T-Heater™
Whirlpool Heater
• Factory installed and tested whirlpool system
Nominal Dimensions:
1384 x 1384 x 546mm
(54-1/2" x 54-1/2" x 21-1/2")
To Be Specified - Required:
❏ Color:
❏ Bath Filler: (specify finish)
❏ Bath Drain: 1583.470 (specify finish)
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
To Be Specified - Optional:
❏ Universal Tile Bead Kit: 751755-100
❏ Corner Apron: 0707.200 (specify color)
❏ System II Control Bezel: 9861.100 (specify finish)
• NFPA 258 for Smoke Density
For color/finish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
American Standard whirlpools and air baths with
EverClean® incorporate a patented silver-ion
additive right into the circulation piping to protect
the pipes from mold, mildew, algae and fungus that
could cause deterioration or staining of the pipes.
* NOTE: Safe-T-Heater™ is designed to
maintain water temperature during operation. It will not
heat cold water to desired bathing temperature.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
H39
© 2008 AS America Inc.
Revised 2/08
|