Specifications
Version 1.2 June 2006
ULTRABASS BX4210A
SPECIFICATIONS
AUDIO INPUTS
Active instrument input
Input impedance
Passive instrument input
Input impedance
Return
1/4" TS connector, unbalanced
approx. 220 kW unbalanced
1/4" TS connector, unbalanced
approx. 750 kW unbalanced
1/4" TS connector, unbalanced
approx. 10 kW unbalanced
Input impedance
AUDIO OUTPUTS
Send/Tuner
Output impedance
Line Out
1/4" TS connector, unbalanced
min. 2.2 kW unbalanced
1/4" TS connector, unbalanced
approx. 100 W unbalanced
max. +4 dBu
Output impedance
Output level
D.I. output
XLR connector, servo-balanced
approx. 100 W balanced
max. -10 dBu
Output impedance
Output level
Loudspeaker connectors
1/4" TS connector, unbalanced
professional connector
(compatible to Neutrik® Speakon®)
min. 4 W
Load impedance
SYSTEM SPECIFICATIONS
Power amp output
450 Watts into 4 W
SPEAKERS
High-power bass speakers
2 x 10" BUGERATM
Aluminum cone speakers
93 dB @ 1 W / 1 m
max. 120 dB
Sensitivity
SPL
Impedance
2 x 4 W
Frequency response
Power (program)
Tweeter
42 Hz - 16 kHz
500 W
1" tweeter driver
POWER SUPPLY
Mains voltages
U.S./Canada
120 V~, 60 Hz, 6 A
China/Korea
220 V~, 50 Hz, 3 A
Europe/U.K./Australia
230 V~, 50 Hz, 3 A
Japan
100 V~, 50/60 Hz, 6 A
General export model
120/230 V~, 50 - 60 Hz
100 - 120 V~: T 10 A H 250 V
220 - 240 V~: T 6.3 A H 250 V
Standard IEC receptacle
Fuse
Mains connection
PHYSICAL/WEIGHT
Dimensions (H x W x D)
approx. 24 7/10" (627 mm)
x 26 1/2" (674 mm)
x 14 3/5" (370 mm)
Weight
approx. 39 kg (86 lbs)
BEHRINGER constantly strives to maintain the highest quality standards. Modifi-
cations may be made, if necessary, without prior notice. The specifications and appearance
of the equipment may therefore differ from those listed or illustrated.
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The names
of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Their use
neither constitutes a claim of the trademarks by BEHRINGER nor affiliation of the trademark owners with BEHRINGER. BEHRINGER accepts no
liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained
herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not
agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this
manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for
any purpose, without the express written permission of BEHRINGER International GmbH. BEHRINGER® is a registered trademark.
ALL RIGHTS RESERVED. © 2005 BEHRINGER International GmbH,
Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany.
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
3
|