Stompbox Accessories
PEDAL BOARD
PB600
Pedal Board with 9 V DC Power Supply
and Patch Cables
Ultra-compact and lightweight pedal
board for transporting up to 6 effects
pedals, including patch cables
Generous 1.7 A power adapter
included for powering more
than 12 devices*—includes
1 x 6 daisy-chain cabling
When effects are an integral part of your
rig, their power adapters and patch cables
can often be the most vulnerable part, and
the most likely to sabotage your set if they're
not pampered. Rather than tossing your
pedals, power adapters and all other cabling
into a duffel bag after a gig, keep them
safe—and ready to rock at a moment’s
notice—with the PB600.
Ultra-rigid plastic design withstands
even heavy impact
High-quality components and
exceptionally rugged construction
ensure long life
It's all about connections
Conceived and designed by
BEHRINGER Germany
This awesome pedal board makes
hooking up six 2.5" x 4.5" pedals as easy
as hooking up just one (of course, if you're
using pedals that aren’t 2.5" x 4.5", the snug
foam padding can be cut to accommodate
pedals of varying shapes). The PB600
* Depends on the power consumption
of the effects pedals, etc.
includes ¼" patch cables, so you can leave
your pedals connected to one another, ready
to pass signal even when you’re transporting
them. It also comes with 1 x 6 daisy chain
cabling so that when you plug in the 1.7 A
power adapter, all your pedals receive power.
Meanwhile, all cabling remains safe and
free of strain. Failure is almost guaranteed
when you’re dealing with a rat’s nest of loose
cabling, but with the PB600, your effects
chain is always safe and organized.
Connect your guitar, bass or keyboard to
the single ¼" input in the upper right corner
of the board. A pair of ¼" FROM EFFECTS
jacks in the upper left corner allow you to
connect stereo effects, and two ¼" OUTPUT
TO AMP jacks send a left and right stereo
signal to up to two amps.
When it’s time to load out, just unplug
the power supply, disconnect your guitar
and amp, put the lid back on the PB600
and slide the locking latches back into
place. The heavy-impact plastic casing will
protect your pedals from the very worst
dings, scrapes and scratches the road
throws your way.
Page 3 of 3
PEDAL BOARD
PB600
FROM EFFECTS
connectors receive
stereo signal from
pedals. OUTPUT TO AMP
connectors send signal
to two amps
Sliding locks
hold lid firmly
in place when
pedal board is
not in use
1.7 A power
adaptor
connector
DC cabling
duct
DC OUT
Heavy-duty
plastic
casing
Foam padding
¼" TS INPUT connector
receives signal from
instrument.
¼" TS TO EFFECTS
connector sends signal
to effects pedals
connector
powers all
effects via
daisy chain
holds effect
pedals in place
SPECIFICATIONS
China
Japan
220 V~, 50 Hz
PB600
Dimensions
(HxWxD)
GPE182-090170-5 (HSB-CCC)
Power Supply
9 V, 1.7 A switching
adaptor(included)
13 x 26 1⁄8 x 4 ½"
100 V~, 50/60 Hz
GPE182-090170-6 (HSB-JP)
329 x 663.6 x 115 mm
Connectors
¼" TS, unbalanced
PB1000
Weight
Power connector
2 mm DC jack, center negative
(with daisy-chain cable included)
USA/Canada
120 V~, 60 Hz
GPE182-090170-1 (HSB-UL)
approx. 11.8 lbs / 5.3 kg
including PSU & daisy chain
Power consumption 2 mA
Europe/Australia
230 V~, 50 Hz
GPE182-090170-2 (HSB-EU)
PB600
approx. 8.4 lbs / 3.8 kg
including PSU & daisy chain
PHYSICAL
U.K.
GPE182-090170-3 (HSB-UK)
Please note these specifications are preliminary and conceptual in nature,
and as such are subject to change as product development progresses.
This information is supplied for market research purposes only and is not
to be made public in any manner. This document is solely the property of
The MUSIC Group, or one of its subsidiaries, and must be surrendered upon
request of the owner.
PB1000
Dimensions
( H x W x D )
Korea
220 V~, 60 Hz
GPE182-090170-4 (HSB-SAA)
504.3 x 663.6 x 115 mm
1 9 7/8 x 2 6 1⁄8 x 4 ½"
For service, support or more information contact the BEHRINGER location nearest you:
Europe
Tel.: +49 2154 9206 4149
Fax: +49 2154 9206 4199
Singapore
Tel.: +65 6845 1800
Fax: +65 6214 0275
Tel.: +61 03 9877 7170
Fax: +61 03 9877 7870
Japan
Tel.: +81 3 5281 1180
Fax: +81 3 5281 1181
USA/Canada Tel.: +1 425 672 0816
Australia
Fax: +1 425 673 7647
©2011 Red Chip Company Ltd. Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. BEHRINGER accepts no liability for any loss which
may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. 985-10000-00382
|