Technical Specifications
Version 1.0 October 2005
MINIMIC MIC800
SPECIFICATIONS
MIC INPUT
Type
Impedance
Max. input level
XLR connector (balanced)
approx. 2.6 kΩ (balanced)
-2 dBu, +18 dBu with pad
LINE INPUT
Type
Impedance
Max. input level
¼" TRS connector (balanced)
approx. 20 kΩ (balanced)
+19 dBu, +28 dBu with pad
OUTPUT
Type
Impedance
Max. output level
¼" TS connector (unbalanced)
approx. 130 Ω
+15 dBu
SYSTEM SPECIFICATIONS
Frequency response
MIC: 10 Hz to 90 kHz, ±3 dB
LINE: 10 Hz to 67 kHz, ±3 dB
100 dB, 20 Hz to 20 kHz
0.016 % typ. @ -16 dBu input
86 dBu @ +4 dBu, a-weighted
Dynamic range
Distortion
Signal-to-noise ratio:
BUTTONS
PAD
20 dB
180°
+48 V
Ø (phase inversion)
PHANTOM power
CONTROLS
INPUT GAIN
LOW CUT
+26 dB to +60 dB
15 to 360 Hz
OUTPUT LEVEL
-oo dB to +10 dB
POWER SUPPLY
Mains connection
Mains voltage
USA/Canada
external power supply, 9 V~ / 750 mA
120 V~, 60 Hz
240 V~, 50 Hz
220 V~, 50 Hz
230 V~, 50 Hz
100 V~, 50 - 60 Hz
approx. 5 W
U.K./Australia
China
Europe
Japan
Power consumption
DIMENSIONS/WEIGHT
Dimensions (H x W x D)
Weight
approx. 1.89" (48 mm) x 9.55" (243 mm) x 4.72" (120 mm)
approx. 0.84 lbs. (0,380 kg)
BEHRINGER constantly strives to maintain the highest quality standards. Modifications may be made, if necessary, without prior
notice. The specifications and appearance of the equipment may therefore differ from those listed or illustrated.
3
MINIMIC MIC800
Technical specifications and appearance subject to change without notice. The information contained
herein is correct at the time of printing. The names of companies, institutions or publications pictured
or mentioned and their respective logos are registered trademarks of their respective owners. Their
use neither constitutes a claim of the trademarks by BEHRINGER® nor affiliation of the trademark
owners with BEHRINGER®. BEHRINGER® accepts no liability for any loss which may be suffered by
any person who relies either wholly or in part upon any description, photograph or statement contained
herein. Colours and specification may vary slightly from product. Products are sold through our
authorised dealers only. Distributors and dealers are not agents of BEHRINGER® and have absolutely
no authority to bind BEHRINGER® by any express or implied undertaking or representation. No part
of this manual may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording of any kind, for any purpose, without the express
written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered
trademark.
ALL RIGHTS RESERVED. © 2005 BEHRINGER Spezielle Studiotechnik GmbH,
Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany.
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
4
|