Behringer DJ Equipment ZMX8210 User Manual

User Manual

A50-17433-00002

ULTRAZONE ZMX8210

ULTRAZONE

Professional 8-Channel 3-Bus Mic/Line Zone Mixer with Remote Control and Link Ports

= Ultra-ﬂexible and easy-to-use zone mixer with remote control ports for commercial sound systems and

ﬁxed installation applications

= 6 ultra-low noise Mic/Line inputs with Gain control, -20 dB Pad, Level/Clip indicator,

+48 V phantom power and bus-assign switches

= 2 selectable high-headroom stereo inputs with mono/stereo switch

= Channel 1 provides variable threshold to enable automatic bus mute for announcements, etc.

= 3 assignable outputs (Left, Right and Aux) with individual Master controls and 5-segment LED meters

= Ultra-musical 4-band master EQ and global microphone low-cut ﬁlter for perfect sound adjustment

= Left, Right, Aux and Mute bus links available including Master/Slave switch for connecting multiple

units

= Remote master Left/Right level control port for ultimate ﬂexibility

= Select switch for routing microphone bus post remote control

= Integrated channel muting system with Priority select

= All inputs/outputs on Euro-type connectors

= High-quality components and exceptionally rugged construction ensure long life

= Conceived and designed by BEHRINGER Germany

ULTRAZONE ZMX8210

Foreword

Table of contents

Dear Customer,

1. Introduction......................................................................... 5

Welcome to the team of

ULTRAZONE users, and

thank you very much for

expressing your confi-

dence in BEHRINGER

by purchasing this rack

mixer.

1.1 Before getting started................................................... 5

1.1.1 Shipment ............................................................. 5

1.1.2 Initial operation ................................................... 5

1.1.3 Online registration............................................... 5

2. Controls and connector s ................................................... 5

2.1 Front pane l ................................................................... 5

2.2 Rear panel.................................................................... 6

Writing this foreword

for you gives me great

pleasure because it rep-

resents the culmination

of many months of hard

work delivered by engi-

3. Applicatio n .......................................................................... 7

neering team to achieve

a very ambitious goal:

to present an outstand-

ing rack mixer whose

amazing functions offer

a maximum on ﬂexibility

and performance. The

3.1 Examples of application ............................................... 7

3.1.1 Directing public address to up to three zones ..... 7

3.1.2 Using multiple ZMX8210s................................... 7

3.1.3 Remote control of the ZMX8210......................... 7

3.2 Basic operation ............................................................ 8

task of designing our new

4. Installation........................................................................... 8

4.1 Rack mounting ............................................................. 8

4.2 Audio connection s ........................................................ 8

ZMX8210 certainly meant a great deal of responsibility, which

we assumed on you, the discerning user and musician. Meeting

your expectations also meant a lot of work and night shifts. But it

was fun, too. Developing a product usually brings a lot of people

together, and what a great feeling it is when all who participated

in such a project can be proud of what they've achieved.

5. Speciﬁcation s ................................................................... 10

It is our philosophy to share our enjoyment with you, because you

are the most important member of the BEHRINGER team. With

your highly competent suggestions for new products you've made

a signiﬁcant contribution to shaping our company and making it

successful. In return, we guarantee you uncompromising quality

as well as excellent technical and audio properties at an extremely

reasonable price.All of this will let you give free rein to your creativ-

ity without being hampered by budget constraints.

6. Warrant y ............................................................................ 11

We are often asked how we manage to produce such high-quality

equipment at such unbelievably low prices. The answer is quite

simple: it's you, our customers! Many satisﬁed customers mean

large sales volumes enabling us to get better purchasing terms for

components, etc. Isn't it only fair to pass these beneﬁts on to you?

Because we know that your success is our success too!

I would like to thank all of you who have made the ULTRAZONE

possible. You have made all your own personal contributions, from

the developers and the many other employees at this company to

you, the BEHRINGER user.

My friends, it's been worth the effort!

Thank you very much,

Uli Behringer

ULTRAZONE ZMX8210

1.1.3 Online registration

1. Introduction

PleaseremembertoregisteryournewBEHRINGERequipmentright

after your purchase by visiting www.behringer.com (alternatively

www.behringer.de) and read the terms and conditions of our

warranty carefully.

Thank you for purchasing the ULTRAZONE ZMX8210. The

ZMX8210 is a professional rack mixer which is especially suitable

for ﬁxed installation applications and allows public address to be

directed to up to three zones (rooms). The eight input channels

process Line and Microphone signals. Further inputs are added

by connecting a second ZMX8210. All channels have high-quality

preampliﬁers to ensure the highest level of sound quality. The

input signals can ﬂexibly be routed to three output buses as well

as effectively be processed with the integrated 4-band equalizer.

Several functions of the ZMX8210 can be controlled remotely by

using simple control elements. Thanks to its intuitive control panel,

the unit can also be employed by inexperienced users after a short

while unlike conventional mixers.

Should your BEHRINGER product malfunction, our goal is to have

it repaired as quickly as possible. Please contact the retailer from

whom the equipment was purchased. Should your BEHRINGER

dealer not be located in your vicinity, you may directly contact

one of our subsidiaries. Corresponding contact information is

included in the original equipment packaging (Global Contact

Information/European Contact Information). Should your country

not be listed, please contact the distributor nearest you. A list of

distributors can be found in the support area of our website (www.

behringer.com/support).

The ZMX8210 gives you full control in no time to direct public

address into every setting .

Registering your purchase and equipment with us helps us process

your repair claims quicker and more efﬁciently.

Have fun with your new mixer.

1.1 Before getting started

1.1.1 Shipment

Thank you for your cooperation!

2. Controls and connectors

2.1 Front panel

The controls of channels 1 – 6 and 7 – 8 are largely identical as

well as the controls of the LEFT, RIGHT andAUX buses. Channels

1 and 7 plus the LEFT bus are described exemplarily.

Your ZMX8210 was carefully packed at the factory, and the

packaging was designed to protect the unit from rough handling.

Nevertheless, we recommend that you carefully examine the

packaging and its contents for any signs of physical damage that

may have occurred during transit.

Pressing the switch controls, unless otherwise noted, activates the

described functions, but are deactivated when not pressed.

If the unit is damaged, please do NOT return it to BEH-

RINGER. Instead, notify your dealer and the shipping

company immediately. Otherwise, claims for damage

or replacement may not be honored.

Always use the original packing carton to prevent dam-

age during storage or transport.

Make sure that no children are left unsupervised with

the unit or its packaging.

Please ensure proper disposal of all packing materi-

als.

Fig. 2.1: Controls of the ZMX8210

1.1.2 Initial operation

Channels 1 – 6

Be sure that there is enough space around the unit for cooling.

To avoid overheating, please do not place the ZMX8210 near

radiators and other equipment emanating heat.

{1} PAD: The switch attenuates the input level of loud signal

sources by 20 dB.

{2} +48 V: The switch activates the phantom power for capaci-

Blown fuses must be replaced by fuses of the same type

and rating! The correct value is speciﬁed in “Speciﬁca-

tions.” Unplug the unit before replacing the fuse!

tor microphones.

{3} L, R, AUX: The three switches route the channel signals to

one or more output buses.

The mains connection is made using the enclosed power cord and

a standard IEC receptacle. It meets all of the international safety

certiﬁcation requirements.

{4} THRESH (only Channel 1): The knob selects the level at

which the signal is muted. When the level of the input signal

exceeds the speciﬁed value, the signal of channels 2 – 8 on

the LEFT/RIGHT bus is muted. Apply the Mute function to

fade out music signals as soon as a microphone on channel

1 is talked into.

Please make sure that all units have a proper ground

connection. For your own safety, never remove or dis-

able the ground conductor from the unit or of the AC

power cord. The unit shall always be connected to the

mains socket outlet with a protective ground connec-

tion.

{5} LEVEL: This knob adjusts the preampliﬁcation and the level

with which the input signal is sent to the selected buses.

{6} LEDs: The LEDs show the input levels. When the CLIP

LED lights up, the input level needs to be attenuated by

using the LEVEL knob {5} to prevent clipping. In case the

attenuation is insufﬁcient, use PAD switch {1} to attenuate

the signal further.

Please ensure that only qualiﬁed people install and

operate the unit. During installation and operation,

the user must have sufﬁcient electrical contact to the

ground, otherwise electrostatic discharges might affect

the operation of the unit.

Channels 7 – 8

The sound quality may diminish within the range of pow-

erful broadcasting stations and high-frequency sources.

Increase the distance between the transmitter and the

device and use shielded cables for all connections.

{7} MONO: This switch selects the conﬁguration of the stereo

channels:

= In mono mode (switch pressed), the channel's L/R

inputs are mixed together and sent to the LEFT, RIGHT

and AUX buses. In this way, a mono signal is sent to all

output buses at the same time.

Controls and connectors

ULTRAZONE ZMX8210

= In stereo mode (switch not pressed), the signal of the

L input is sent to the LEFT bus, the R input is sent to

the RIGHT bus and a mixed L/R signal is sent to the

AUX bus.

To disconnect the unit from the mains, please pull the

mains plug. When using the unit, make sure that the

mains plug is readily accessible. When using the unit

mounted in a rack, please make sure that you can easily

disconnect the unit from the mains by using a plug or a

circuit breaker on the backside.

{8} LEDs: These have the same function as the control {6}. In

stereo mode, the LEDs show the summed level of the input

signals L and R.

Please note: The POWER switch does not entirely dis-

connect the unit from the mains when turned off. For

this reason, disconnect the cable from the mains plug

when the unit is not used for a long period.

{9} LEVEL: This has the same function as the control {5}. In

stereo mode, the control adjusts the volume level of the

L/R signal.

[10] CH SELECT: This switch is used either to activate channel

7 or 8. The active channel is indicated by the glowing of the

corresponding LED.

SERIAL NUMBER: The serial number is found on the rear panel.

It is required for online registration.

2.2 Rear panel

The BUS LINKS connector as well as the channel inputs 7 and 8

are unbalanced. The other PCB inputs and outputs are balanced.

To use balanced connectors for unbalanced connections, insert

a jumper wire between the ground pin (m) and the negative pin

(-).

Fig. 2.2: Controls of the ZMX8210

Main section

Fig. 2.3: Connections of the ZMX8210

[11] MIC LOW CUT: This switch cuts low-frequency rumble

[19] FUSEHOLDER/IEC power receptacle: The connection to the

mains is established through an IEC connector. It meets all

of the international safety certiﬁcation requirements.Aﬁtting

power cord is included. When replacing the fuse, you need

to use the same type.

below 100 Hz

[12] MICMIX:Thisswitchremovesthesignalofchannels1–6from

the remote control function, allowing only the output volume of

channels 7/8 on the LEFT/RIGHTbus to be remote controlled.

When the switch is not pressed, the total volume of all chan-

nels fed to the LEFT/RIGHT bus are remote controlled.

Before you change the fuse, switch off the device and

pull the plug to avoid electric shock or damage to the

device.

[13] RIGHT MUTE: This switch excludes the RIGHT bus from

the Mute function. This is helpful when using the RIGHT and

LEFT buses for different zones (rooms).

[20] REMOTE:This connector is used for connecting components

to remote control the ZMX8210.

= When the switch is pressed, the signal of channels 1 – 8,

which is dependent on the signal level of channel 1, is

muted on both the LEFT and RIGHT bus. This occurs

when the input level of channel 1 drops below the speci-

ﬁed threshold value (THRESH {4}).

= It is possible to connect a simple potentiometer to remote

control the volume of the LEFT and RIGHT buses (see

Chapter 3.1.3).

= Connect a push-button switch and two control diodes to

remote control the CH SELECT switch {10} of channels

7 and 8 (see Chapter 3.1.3).

= When the switch is not pressed, only the LEFT bus

is muted while the RIGHT bus continues to transmit

a signal, provided the individual channels have been

routed accordingly.

[21] BUS LINKS: Use this connector to link two ZMX8210s

together to provide additional inputs (signals). The three

output buses LEFT/RIGHT/AUX are linked together using

the connector. The mute signal of the ZMX8210 which is set

to be the master is also transmitted so that the mute function

of the master is also able to mute the buses of the slave.

[14] EQ ON: The switch activates the equalizer [15] for the LEFT

and RIGHT bus.

[15] LOW/LOW MID/HIGH MID/HIGH: This knob adjusts the

boost/cut of factory-preset frequencies as follows:

[22] SLAVE/MASTER: The switch places the ZMX8210 in the

= LOW: This boosts/cuts frequencies below 70 Hz by a

master or slave mode of operation.

maximum of ±15 dB.

When the switch

= LOW MID: This boosts/cuts frequencies around 300 Hz

by a maximum of ±15 dB.

= is pressed, the ZMX8210 is placed in the slave mode

of operation.

= HIGH MID: This boosts/cuts frequencies around 3 kHz

by a maximum of ±15 dB.

= is not pressed, the ZMX8210 is placed in the master

mode of operation.

= HIGH: This boosts/cuts frequencies above 10 kHz by a

maximum of ±15 dB.

The ZMX8210 needs to be used in master mode when

no additional units are connected!

Buses

[16] LEDs: When the CLIP LED lights up, attenuate the output

level by using the LEVEL knob [17] to avoid clipping.

When more than one ZMX8210 are connected, only one

unit is allowed to be in master mode. The other units

need to be placed in the slave mode of operation.

[17] LEVEL: This knob adjusts the output level of the bus outputs

OUT L, OUT R and AUX.

[23] AUX/OUT R/OUT L: Balanced signal outputs for busesAUX,

RIGHT and LEFT.

Mains

[18] POWER: The POWER switch powers up the mixer. The

POWER switch should be in the Off position when connecting

the unit to the mains.

Controls and connectors

ULTRAZONE ZMX8210

In case you need to use further signals, simply link to units to-

gether. The ZMX8210 can handle line-level sources, dynamic

microphones and phantom-powered capacitor microphones as

input signals.

3.1 Examples of application

In comparison to conventional rack mixers, the ZMX8210 offers

several advantages for ﬁxed installations and PA equipment that

is being used by laymen. With the Euro-type connectors and the

easy usability, the ZMX8210 optimally fulﬁlls the requirements of

these kind of applications.

Fig. 2.4: Connections of the ZMX8210

[24] INPUTS 7 – 8: Unbalanced signal inputs for channels 7 – 8.

The connections are RCA connectors.

[25] INPUTS 1 – 6: Balanced signal inputs for channels 1 – 6.

3.1.1 Directing public address to up to three zones

The following application example shows a typical cabling of three

zones in mono mode. Distribute the signal to zones 1 – 3 by using

the routing switches (L, R, AUX) of the particular input channel.

Instead of three independent mono zones, it is also possible to

have one stereo zone (LEFT / RIGHT bus) and one mono zone

(AUX bus).

3. Application

The ZMX8210 is a user-friendly rack mixer which is principally

used for ﬁxed installations to direct public address in different

zones or facilities, such as cafés, practices and houses of wor-

ship. With one unit, you can provide a maximum of three zones

with different signals.

Fig. 3.1: Example of using three zones

3.1.2 Using multiple ZMX8210s

3.1.3 Remote control of the ZMX8210

In case the eight input channels of the ZMX8210 are not enough,

you can link two units together by using the BUS LINKS connec-

tors. The output buses of the two units are connected by routing

the input signals of both units to the output buses. This gives you

additional inputs.

The ZMX8210 provides a 5-pin REMOTE connector to remote

control

= the volume level of the LEFT and RIGHT buses.

= channel selection of channels 7 and 8.

The remote control can be realized by using simple compo-

nents.

The output signal can be on both units. To use two units together,

please complete the following steps:

Volume level of the LEFT and RIGHT buses

1) Set one unit to master mode and the second to slave mode

by using the SLAVE/MASTER switch [22].

To be able to remote control the volume level of the LEFT and

RIGHT buses, you need a potentiometer. Use a

2) Using a shielded, 4-pin conductor cable to connect the BUS

LINKS connector of the MASTER unit to the corresponding

connector of the SLAVE unit.

= 10 kΩ potentiometer to achieve a maximum attenuation of

30 dB.

= 100 kΩ potentiometer to achieve a maximum attenuation of

60 dB.

Application

ULTRAZONE ZMX8210

Connect the potentiometer to pins V and SHD. Connect the mid

tap to pin C (see Fig. 3.2).

3.2 Basic operation

Using the ZMX8210 is easy to learn and is very similar to using a

standard mixer. Complete the following steps:

1) Hook up the unit as described in Chapter 3.1.

2) Adjust the LEFT, RIGHT andAUX LEVEL knobs [17] to center

position and turn the LEVEL knobs {5} of each channel fully

to the left.

3) Turn on the ZMX8210 and the other devices you want to use

(ampliﬁer and loudspeakers last).

4) Apply an audio signal (line or microphone signal) to an input

channel.

5) Press the +48 V push-button switch {2} in case you want to

use a capacitor microphone.

6) Press the push-button switches L, R and AUX {3} to select

the buses to which the input signals are sent.

7) Turn the LEVEL knob of the corresponding channel to the

right until

= you have reached the required volume level

= or the 0 db LED glows continuously.

Volume potentiometer

Fig. 3.2: Remote volume control

connection with potentiometer

If the CLIP LED lights up, you need to adjust the level by slowly

turning the knob to the left. For especially strong input signals, use

the PAD push-button switch {1} to attenuate the signal further.

Alternatively, you can control the volume by using a positive con-

trol voltage of max. 11 V DC. The voltage needs to be inserted

between the pins SHD and C.

8) Repeat steps 4 to 7 with additional signal sources. Use chan-

nels 7 or 8 for stereo signal sources.

9) In case you are using a microphone, press the MIC LOW CUT

push-button switch [11] to reduce low-frequency rumble such

as subsonic noise.

When using a voltage source to remote control the vol-

ume level, make sure that the control voltage does not

exceed 11 V DC or else your unit could be damaged.

10) Press the EQ ON push-button switch [14] and adjust the LOW,

LOW MID, HIGH MID and HIGH knobs of the equalizer section

(15) to modify the sound.

Selecting stereo channels 7 and 8

To select the stereo channels 7 and 8, you need a push-button

switch and optionally two LEDs.

11) Use the LEVEL knobs of the LEFT, RIGHT and AUX buses

[17] to adjust the volume level of the OUT L, OUT R and AUX

outputs (zones).

Connect the push-button switch to pins SHD and SEL. You can

add two LEDs to indicate the selected channel. They have to be

connected in parallel with a reverse polarity between the pins IND

and SHD (see Fig. 3.3).

4. Installation

4.1 Rack mounting

The unit requires the height of 1 U to ﬁt within a 19" rack. Please

make sure to provide approximately 4" of space for the connec-

tors on the rear panel. Please use M6 rack screws and nuts when

rack-mounting the unit.

4.2 Audio connections

The ZMX8210 connections are Euro-type connectors. You require

special PCB connectors for the cabling. You can purchase the

connectors at well-assorted electronics retailers. The ZMX8210

connectors' pin assignment is printed on the rear panel of the unit.

Alternatively, refer to the following diagrams.

Control LED CH 8

INPUTS / AUX / OUT R / OUT L

Channel select switch

Control LED CH 7

Fig. 3.3: Connection with push-button switch and two LEDs for

channel selection

Fig. 4.1: Pin assignment of the INPUTS connectors

Installation

ULTRAZONE ZMX8210

Fig. 4.2: Pin assignment of the output bus connectors

Signal (positive / balanced)

Signal (negative / balanced)

Ground

Use all three pins for a balanced connection.

For an unbalanced connection, use pins m and + and insert a

jumper wire between pins m and -.

BUS LINKS

Fig. 4.3: Pin assignment of the BUS LINKS connector

M(UTE) bus signal link

A(UX) bus signal link (unbalanced)

SH(IEL)D signal link (shield)

SHD:

R(IGHT) bus signal link (unbalanced)

L(EFT) bus signal link (unbalanced)

REMOTE

Fig. 4.4: Pin assignment of the REMOTE connector

V(OLUME) connection to the potentiometer

(potential)

C(ONTROL) connection to the potentiometer

(mid tap)

SHD:

SH(IEL)D connection

(shield)

SEL:

SEL(ECT) connection to the push-button switch

IND(ICATOR) connection to the LEDs

IND:

Installation

ULTRAZONE ZMX8210

5. Speciﬁcations

INPUTS 1 – 6

Type

Euro-type connector, electronically balanced

Impedance

3 kΩ balanced, 1.5 kΩ unbalanced (with PAD)

+ 12 dBu (with PAD)

Max. input level

Max. gain

40 dB

Crosstalk

> 63 dB @ 1 kHz

Common-mode rejection ratio (CMRR)

Equivalent input noise (EIN)

INPUTS 7 – 8

Type

> 75 dB @ 1 kHz, 22 Hz – 22 kHz

-116 dBu A-weighted; terminated with 150 Ω

RCA connectors, unbalanced

10 kΩ, unbalanced

+ 15 dBu

Impedance

Max. input level

Max. gain

15 dB

OUT L, OUT R, AUX

Type

Euro-type connector, balanced

22 dB

Max. gain

Max. gain (input/output)

Impedance

62 dB (without PAD)

60 Ω, unbalanced, 120 Ω, balanced

+ 21 dBu unbalanced/balanced

> 63 dB @ 1 kHz

Max. output level

Crosstalk (output/output)

Noise (all level controls down)

Signal-to-noise ratio

BUS LINKS

-105 dBu A-weighted

87 dB @ 0 dB A-weighted

Type

Euro-type connector, unbalanced

approx. 150 Ω

Impedance

Max. output level

REMOTE

+ 21 dBu

Type

Euro-type connector

30 dB attenuation with 10 kΩ potentiometer (not

included)

Volume control

60 dB attenuation with 100 kΩ potentiometer (not

included)

Channel select 7/8

Push-button switch (1 pin) required (not included)

MIC LOW CUT

LOW

High-pass ﬁlter; Cutoff frequency: 100 Hz

± 15 dB @ 70 Hz

LOW MID

± 15 dB @ 300 Hz

HIGH MID

± 15 dB @ 3 kHz

HIGH

± 15 dB @ 10 kHz

SYSTEM SPECIFICATIONS

Frequency response

Distortion (THD+N)

POWER SUPPLY

Power consumption

20 Hz – 22 kHz ± 0.5 dB

< 0.05 %

max. 25 W

T 630 mA H 250 V

(100 – 120 V ~, 50/60 Hz)

T 315 mA H 250 V

Fuse

(220 – 230 V ~, 50/60 Hz)

DIMENSIONS/WEIGHT

Dimensions

approx. 1 3/4" x 19" x 8 1/2" (approx. 44.5 mm x 482.6 mm x

217 mm)

Weight

approx. 4.9 lb. (2.2 kg)

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modiﬁcations may be made from time to time to existing products

without prior notice. Speciﬁcations and appearance may differ from those listed or illustrated.

Speciﬁcations

ULTRAZONE ZMX8210

2. If the product needs to be modiﬁed or adapted in order to comply with

applicable technical or safety standards on a national or local level, in

any country which is not the country for which the product was originally

developed and manufactured, this modiﬁcation/adaptation shall not be

considered a defect in materials or workmanship. The warranty does

not cover any such modiﬁcation/adaptation, irrespective of whether

it was carried out properly or not. Under the terms of this warranty,

BEHRINGER shall not be held responsible for any cost resulting from

such a modiﬁcation/adaptation.

6. Warranty

§ 1 Other warranty rights

and national law

1. This warranty does not exclude or limit the buyer’s statutory rights

provided by national law, in particular, any such rights against the seller

that arise from a legally effective purchase contract.

2. The warranty regulations mentioned herein are applicable unless they

constitute an infringement of national warranty law.

3. Free inspections and maintenance/repair work are expressly excluded

from this warranty, in particular, if caused by improper handling of the

product by the user. This also applies to defects caused by normal wear

and tear, in particular, of faders, crossfaders, potentiometers, keys/but-

tons, tubes, guitar strings, illuminants and similar parts.

§ 2 Online registration

Please do remember to register your new BEHRINGER equipment right

afteryourpurchasebyvisitingwww.behringer.com(alternativelywww.beh-

ringer.de)andkindlyreadthetermsandconditionsofourwarrantycarefully.

Registering your purchase and equipment with us helps us process

your repair claims quicker and more efﬁciently.

4. Damage/defects caused by the following conditions are not covered

by this warranty:

= improper handling, neglect or failure to operate the unit in compli-

ance with the instructions given in BEHRINGER user or service

manuals;

Thank you for your cooperation!

§ 3 Warranty

= connection or operation of the unit in any way that does not comply

with the technical or safety regulations applicable in the country

where the product is used;

1. BEHRINGER (BEHRINGER International GmbH including all BEH-

RINGER subsidiaries, except BEHRINGER Japan) warrants the

mechanical and electronic components of this product to be free of

defects in material and workmanship for a period of one (1) year¹from

the original date of purchase, in accordance with the warranty regulations

described below. If the product shows any defects within the speciﬁed

warranty period that are not excluded from this warranty as described

under § 5, BEHRINGER shall, at its discretion, either replace or repair

the product using suitable new or reconditioned parts. In the case that

other parts are used which constitute an improvement, BEHRINGER

may, at its discretion, charge the customer for the additional cost of

these parts.

= damage/defects caused by force majeure or any other condition

that is beyond the control of BEHRINGER.

5. Any repair or opening of the unit carried out by unauthorized personnel

(user included) will void the warranty.

6. If an inspection of the product by BEHRINGER shows that the defect

in question is not covered by the warranty, the inspection costs are

payable by the customer.

7. Products which do not meet the terms of this warranty will be repaired

exclusively at the buyer’s expense. BEHRINGER will inform the buyer of

any such circumstance. If the buyer fails to submit a written repair order

within 6 weeks after notiﬁcation, BEHRINGER will return the unit C.O.D.

with a separate invoice for freight and packing. Such costs will also be

invoiced separately when the buyer has sent in a written repair order.

2. If the warranty claim proves to be justiﬁed, the product will be returned

to the user freight prepaid.

3. Warranty claims other than those indicated above are expressly

excluded.

§ 6 Warranty transferability

§ 4 Return authorization number

This warranty is extended exclusively to the original buyer (customer of

retail dealer) and is not transferable to anyone who may subsequently

purchase this product. No other person (retail dealer, etc.) shall be

entitled to give any warranty promise on behalf of BEHRINGER.

1. To obtain warranty service, the buyer (or his authorized dealer) must

call BEHRINGER during normal business hours BEFORE returning

the product. All inquiries must be accompanied by a description of the

problem. BEHRINGER will then issue a return authorization number.

2. Subsequently, the product must be returned in its original shipping

carton, together with the return authorization number to the address

indicated by BEHRINGER.

§ 7 Claim for damage

Failure of BEHRINGER to provide proper warranty service shall not

entitle the buyer to claim (consequential) damages. In no event shall the

liability of BEHRINGER exceed the invoiced value of the product.

3. Shipments without freight prepaid will not be accepted.

§ 5 Warranty regulations

1. Warranty services will be furnished only if the product is accompanied

by a copy of the original retail dealer’s invoice. Any product deemed

eligible for repair or replacement under the terms of this warranty will

be repaired or replaced.

Customers in the European Union please contact BEHRINGER Germany Support

for further details.

Technical speciﬁcations and appearance are subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability

for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and speciﬁcations

may vary slightly from product. Products are sold through our authorized dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to

bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH.

BEHRINGER International GmbH,

Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Muenchheide II, Germany.

Tel. +49 2154 9206 0, Fax +49 2154 9206 4903

Warranty

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

ULTRAZONE

ZMX8210

Responsible party name:

BEHRINGER USA, Inc.

Address:

18912 North Creek Parkway, Suite 200

Bothell, WA 98011, USA

Phone/Fax No.:

Phone: +1 425 672 0816,

Fax: +1 425 673 7647

hereby declares that the product(s)

ULTRAZONE ZMX8210

complies/comply with the FCC rules as mentioned in the following paragraph:

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

= Reorient or relocate the receiving antenna.

= Increase the separation between the equipment and receiver.

= Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

= Consult the dealer or an experienced radio/TV technician for help.

Important information:

Changes or modifications to the equipment not expressly approved by

BEHRINGER USA can void the user’s authority to use the equipment.

4XEM Home Security System IPCAMW40 User Manual
ABC Office Paper Shredder 802CC User Manual
ADTRAN Air Conditioner 610200094 User Manual
Audiovox Automobile Alarm PRO 9644 User Manual
Audiovox Remote Starter 128 8210 User Manual
Audiovox Speaker CE208BT User Manual
Axxess Interface Automobile Parts OESWC 8113 STK User Manual
BB Electronics Switch ETHUB16 User Manual
Behringer Car Speaker B215XL B215XL WH User Manual
Beko Ice Maker TL 546 APS User Manual