BeoVisionꢀ8-40ꢀ
Guideꢀ
Menu overview
1.
2.
3.
FREQUENCY
CHANNEL NO
NAME
FINE TUNE
DECODER
TV SYSTEM
SOUND
AV1–AV6
HDMI EXPANDER
LINK TUNING
TV TUNER
DVB HD
ADJUSTMENT
SPEAKER TYPE
SPEAKER DISTANCE
SPEAKER LEVEL
SOUND SYSTEM
BRIGHTNESS
CONTRAST
COLOUR
TINT
SIZE
HOR. SIZE
VERT. SIZE
HOR. POSITION
VERT. POSITION
GAME MODE
MODE
GROUP
AFTER 1 HOUR
AFTER 2 HOURS
AFTER 4 HOURS
OFF
NAVIGATION BUTTON
NO NAVIGATION BUTTON
3
Navigate in menus
Beo4 with navigation button
If you have a Beo4 remote control with
navigation button and your television is
use the centre button with up, down,
left and right movement to navigate in
menus. Press in the middle of the centre
button to confirm selections and
settings in menus.
To back up through menus, press BACK.
To exit menus, press and hold BACK.
If your television is set up for use
without navigation button, you must
use the ‘star’ to navigate up, down, left
and right in menus and press the centre
button to confirm selections and
settings in menus.
Bring up the TV SETUP menu by pressing
MENU while the TV is on.
Beo4 without navigation button
If you have a Beo4 remote control
without navigation button, you must
use the ‘star’ to navigate up, down, left
and right in menus and press the centre
button to confirm choices and settings
in menus. Also your television must be
set up for use with a Beo4 without
navigation button.
Bring up the TV SETUP menu by pressing
MENU while the TV is on.
To back up through menus, press STOP.
To exit menus, press EXIT.
GO
Beo5
If you operate your television with the
Beo5 remote control, you use the centre
button with up, down, left and right
movement to navigate in menus. Press
in the middle of the centre button to
confirm selections and settings in menus.
To back up through menus, press BACK.
To exit menus, press and hold BACK.
Note that a Beo5 should be re-configured
when you add new products to your setup.
Bring up the TV SETUP menu by pressing
Menu while the TV is on.
4
First-time setup
Theꢀsetupꢀprocedureꢀisꢀactivatedꢀ
whenꢀtheꢀtelevisionꢀisꢀconnectedꢀ
toꢀtheꢀmainsꢀandꢀswitchedꢀonꢀforꢀ
theꢀfirstꢀtime.ꢀYouꢀareꢀledꢀ
The sequence of menus in first-time setup
MENUꢀLANGUAGE …ꢀYouꢀcanꢀselectꢀtheꢀ
languageꢀforꢀon-screenꢀmenus.ꢀTheꢀtextꢀ
onꢀtheꢀscreenꢀchangesꢀasꢀyouꢀmoveꢀfromꢀ
languageꢀtoꢀlanguage.ꢀ
SPEAKERꢀTYPE …ꢀInꢀthisꢀmenu,ꢀyouꢀselectꢀ
whichꢀspeakersꢀareꢀconnectedꢀtoꢀtheꢀ
television,ꢀifꢀany.ꢀSeeꢀpage 19ꢀforꢀfurtherꢀ
throughꢀanꢀautomaticꢀseriesꢀofꢀ
on-screenꢀmenusꢀinꢀwhichꢀyouꢀ
mustꢀregisterꢀtheꢀextraꢀ
TUNERꢀSETUPꢀ…ꢀDisableꢀtheꢀtelevisionꢀtunerꢀ SPEAKERꢀDISTANCE …ꢀInꢀthisꢀmenu,ꢀyouꢀ
CONNECTIONSꢀ…ꢀSelectꢀtheꢀtypeꢀofꢀ
equipmentꢀyouꢀhaveꢀconnectedꢀtoꢀeachꢀ
socketꢀgroups,ꢀtheꢀsocketsꢀused,ꢀtheꢀ
productꢀname,ꢀandꢀtheꢀsourceꢀname.ꢀꢀ
Forꢀfurtherꢀinformationꢀaboutꢀtheꢀ
CHECKꢀAERIALꢀCONNECTION …ꢀThisꢀ
promptꢀonlyꢀappears,ꢀifꢀtheꢀtelevisionꢀ
tunerꢀisꢀenabled.ꢀ
selectꢀtheꢀdistanceꢀinꢀmetresꢀtoꢀeachꢀofꢀ
theꢀspeakersꢀinꢀyourꢀsetup.ꢀ
equipmentꢀyouꢀhaveꢀconnected,ꢀ
suchꢀasꢀloudꢀspeakers.ꢀ
SPEAKERꢀLEVEL …ꢀInꢀthisꢀmenu,ꢀyouꢀcanꢀ
adjustꢀtheꢀvolumeꢀlevelꢀofꢀeachꢀspeakerꢀinꢀ
yourꢀsetup.ꢀ
Ifꢀyouꢀchangeꢀyourꢀsetupꢀatꢀaꢀlaterꢀ
date,ꢀyouꢀcanꢀaccessꢀtheꢀsameꢀ
menusꢀandꢀupdateꢀyourꢀsettings.ꢀ
Rememberꢀthatꢀyouꢀneedꢀtoꢀsetꢀ
theꢀspeakerꢀtypesꢀandꢀtheꢀ
ADJUSTMENT …ꢀInꢀthisꢀmenu,ꢀyouꢀcanꢀ
adjustꢀbass,ꢀvolume,ꢀtreble,ꢀetc.ꢀ
DVBꢀSETUP …ꢀIfꢀtheꢀDVBꢀHDꢀtunerꢀisꢀ
enabled,ꢀtheꢀDVBꢀSETUPꢀmenuꢀappears,ꢀ
seeꢀtheꢀseparateꢀDVBꢀHDꢀGuideꢀforꢀfurtherꢀ
information.ꢀ
AUTOꢀTUNINGꢀ…ꢀWhenꢀyouꢀhaveꢀregisteredꢀ
yourꢀconnectedꢀequipment,ꢀaꢀmenuꢀforꢀ
channelꢀtuningꢀautomaticallyꢀappearsꢀonꢀ
theꢀscreen.ꢀUseꢀtheꢀnavigationꢀbuttonꢀ
rightꢀtoꢀstartꢀautoꢀtuning.ꢀTheꢀtelevisionꢀ
findsꢀallꢀavailableꢀchannels.ꢀForꢀfurtherꢀ
informationꢀaboutꢀtuningꢀTVꢀchannels,ꢀꢀ
distancesꢀinꢀtheꢀSOUNDꢀmenu.ꢀ
For information about where to connect
extra equipment, see the chapter about
connection panels in Getting Started.
5
Choose menu language
You can select the language for on-
screen menus via the TV SETUP menu.
The text on the screen changes as you
move from language to language.
Theꢀmenuꢀlanguageꢀyouꢀchooseꢀ
duringꢀtheꢀfirst-timeꢀsetupꢀofꢀ
yourꢀtelevisionꢀcanꢀbeꢀchangedꢀ
atꢀanyꢀtime.ꢀ
MENU LANGUAGE
DANSK
DEUTSCH
ENGLISH
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ
OPTIONS.ꢀ
ESPAÑOL
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
Onceꢀaꢀmenuꢀlanguageꢀisꢀchosen,ꢀ
allꢀmenusꢀandꢀdisplayꢀmessagesꢀ
areꢀshownꢀinꢀthisꢀlanguage.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
OPTIONSꢀmenuꢀandꢀhighlightꢀMENUꢀ
LANGUAGE.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
MENUꢀLANGUAGEꢀmenu.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀ
moveꢀtoꢀyourꢀlanguageꢀchoice.ꢀ
>ꢀPressꢀtheꢀcentreꢀbutton toꢀmakeꢀyourꢀ
choice.ꢀ
>ꢀPressꢀBACKꢀtoꢀbackꢀupꢀthroughꢀpreviousꢀ
menusꢀorꢀpressꢀandꢀholdꢀBACK toꢀleaveꢀ
theꢀmenus.ꢀ
6
Tuner setup
To disable the internal tuner …
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ
OPTIONS.ꢀ
IfꢀyouꢀdisableꢀtheꢀTVꢀtuner,ꢀyouꢀ
canꢀactivateꢀtheꢀoptionalꢀDVBꢀ
tunerꢀwithꢀtheꢀTVꢀbutton.ꢀIfꢀyouꢀ
disableꢀtheꢀDVBꢀtuner,ꢀyouꢀcanꢀ
activateꢀaꢀconnectedꢀperipheralꢀ
unitꢀwithꢀtheꢀDTVꢀbutton.ꢀ
TUNER SETUP
TV TUNER
DVB HD
ON
ON
>ꢀPressꢀtheꢀcentreꢀbutton toꢀbringꢀupꢀtheꢀ
OPTIONSꢀmenu,ꢀandꢀhighlightꢀTUNERꢀ
SETUP.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
TUNERꢀSETUPꢀmenuꢀandꢀhighlightꢀTVꢀ
TUNER.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ
switchꢀbetweenꢀtheꢀsettingꢀONꢀorꢀOFF.ꢀ
>ꢀHighlightꢀDVBꢀHD.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ
switchꢀbetweenꢀtheꢀsettingꢀONꢀorꢀOFF.ꢀ
>ꢀPressꢀtheꢀcentreꢀbutton toꢀstoreꢀtheꢀ
settings,ꢀorꢀ…ꢀ
>ꢀ…ꢀpressꢀandꢀholdꢀBACK toꢀleaveꢀtheꢀ
menusꢀwithoutꢀstoring.ꢀ
7
Connections
Theꢀconnectionꢀpanelꢀonꢀyourꢀ
televisionꢀallowsꢀyouꢀtoꢀconnectꢀ
signalꢀinputꢀcablesꢀasꢀwellꢀasꢀaꢀ
varietyꢀofꢀextraꢀequipment,ꢀsuchꢀ
asꢀaꢀvideoꢀrecorder.ꢀ
POWER LINK
SUB
DVB
POWER LINK
FRONT
Ifꢀyourꢀtelevisionꢀisꢀequippedꢀ
withꢀtheꢀoptionalꢀSystemꢀModuleꢀ
andꢀyouꢀconnectꢀaꢀcompatibleꢀ
audioꢀsystem,ꢀyouꢀobtainꢀtheꢀ
benefitsꢀofꢀanꢀintegratedꢀaudio/
videoꢀsystemꢀusingꢀaꢀMasterꢀLinkꢀ
cable.
AERIAL
POWER LINK
REAR
Thereꢀareꢀsomeꢀrestrictionsꢀasꢀtoꢀtheꢀtypesꢀofꢀ
equipmentꢀthatꢀcanꢀbeꢀconnectedꢀtoꢀtheꢀ
sockets.ꢀ
AV 1–2
AV 1–4
AV 1–4
AV 4
Decoder
DVD
Anyꢀequipmentꢀyouꢀconnectꢀtoꢀ
theseꢀsocketsꢀmustꢀbeꢀregisteredꢀ
inꢀtheꢀCONNECTIONSꢀmenu.ꢀForꢀ
EquipmentꢀwithꢀVGAꢀoutputꢀcanꢀonlyꢀbeꢀ
connectedꢀandꢀregisteredꢀtoꢀtheꢀAV3ꢀsocket.ꢀ
Satellite (STB)
Recorder (HDR)
Before you connect any equipment
to your television, remember to
disconnect the television from the
mains.
8
>> Connections
IR type
In the AV menus you can select how a
PUC controlled product is connected.
You can choose between ‘PLUG’ (cable)
and ‘IR’ (IR Blaster).
IR-transmitters: To operate non-Bang &
Olufsen products with a Bang & Olufsen
remote control, attach a Bang & Olufsen IR-
transmitter to each of the products. Connect
each transmitter to the corresponding socket
marked PUC on the main connection panel.
PLUG
STB
STB
IR
DVB module
The CA module is a ‘card reader’ for your
Smart Card which decodes the coded
signals sent out by the programme
provider.
Insert the Smart Card in the CA module with
the chip facing towards the television. The
CA module has one protruding edge on one
side and two protuding edges on the other
side. The side with one edge should face
upwards. The Conax Smart Card must be
inserted with the chip facing away from the
television front.
9
>> Connections
Connect and use a PC
Bring up the computer image on the
screen
IMPORTANT! Before connecting a PC to
the television, disconnect the television,
the computer, and all equipment
connected to the computer from the
mains.
Toꢀseeꢀtheꢀcomputerꢀpictureꢀonꢀtheꢀscreen,ꢀ
youꢀmustꢀbringꢀitꢀupꢀwithꢀyourꢀremoteꢀ
control.ꢀ
To bring up the computer picture …
>ꢀPressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ
upꢀorꢀdownꢀtoꢀbringꢀupꢀPCꢀinꢀtheꢀBeo4ꢀ
displayꢀandꢀpressꢀtheꢀcentreꢀbuttonꢀtoꢀ
bringꢀupꢀtheꢀpicture.ꢀYouꢀcanꢀthenꢀoperateꢀ
theꢀcomputerꢀasꢀyouꢀnormallyꢀwould.ꢀ
(Beo5:ꢀPressꢀPc).ꢀ
To connect a computer to the
television …
>ꢀUsingꢀtheꢀappropriateꢀtypeꢀofꢀcable,ꢀ
connectꢀoneꢀendꢀtoꢀtheꢀDVI,ꢀVGAꢀorꢀHDMIꢀ
outputꢀsocketꢀonꢀyourꢀcomputer,ꢀandꢀtheꢀ
otherꢀendꢀtoꢀtheꢀVGAꢀorꢀHDMIꢀsocketꢀonꢀ
theꢀtelevision.ꢀ
>ꢀToꢀhearꢀsoundꢀfromꢀtheꢀcomputerꢀinꢀtheꢀ
speakersꢀconnectedꢀtoꢀtheꢀtelevision,ꢀuseꢀ
theꢀappropriateꢀcableꢀandꢀconnectꢀtheꢀ
soundꢀoutputꢀonꢀtheꢀcomputerꢀtoꢀtheꢀR–Lꢀ
orꢀSPDIFꢀsocketsꢀonꢀtheꢀtelevisionꢀwhenꢀ
appropriate.ꢀ
>ꢀReconnectꢀtheꢀtelevision,ꢀtheꢀcomputer,ꢀ
andꢀallꢀequipmentꢀconnectedꢀtoꢀtheꢀ
computerꢀtoꢀtheꢀmains.ꢀRemember,ꢀtheꢀ
computerꢀmustꢀbeꢀconnectedꢀtoꢀaꢀ
groundedꢀwallꢀoutletꢀasꢀspecifiedꢀinꢀitsꢀ
setting-upꢀinstructions.ꢀ
If you have connected your PC to the VGA
socket on the television, you must register
the PC to the AV3 socket in the
CONNECTIONS menu. A PC connected to
the HDMI socket can be registered to any of
the AV sockets or socket groups.
10
Register additional video equipment
Ifꢀyouꢀconnectꢀadditionalꢀvideoꢀ
equipmentꢀtoꢀyourꢀtelevision,ꢀ
youꢀmustꢀregisterꢀtheꢀequipmentꢀ
inꢀtheꢀCONNECTIONSꢀmenu.ꢀ
What is connected?
Registering the equipment connected
CONNECTIONS
to the television enables you to operate
it with your remote control.
AV1
AV2
AV3
AV4
AV5
AV6
NONE
NONE
NONE
NONE
CAMERA
NONE
NO
Whenꢀtheꢀtelevisionꢀisꢀfirstꢀsetꢀ
up,ꢀsomeꢀofꢀtheꢀequipmentꢀ
connectedꢀatꢀthatꢀparticularꢀ
momentꢀisꢀdetectedꢀbyꢀtheꢀ
television.ꢀTheꢀCONNECTIONSꢀ
menuꢀappearsꢀautomaticallyꢀonꢀ
theꢀscreenꢀduringꢀfirst-timeꢀ
setupꢀforꢀyouꢀtoꢀregisterꢀ
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀ
highlightꢀOPTIONS.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
OPTIONSꢀmenu.ꢀCONNECTIONSꢀisꢀ
highlightedꢀalready.ꢀ
HDMI EXPANDER
HDMI MATRIX
LINK TUNING
NO
NO
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
CONNECTIONSꢀmenu.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀ
stepꢀbetweenꢀtheꢀdifferentꢀsocketꢀgroups:ꢀ
connectedꢀequipment,ꢀifꢀitꢀisꢀnotꢀ
detectedꢀautomaticallyꢀbyꢀtheꢀ
television.ꢀIfꢀyouꢀconnectꢀ
AV1,ꢀAV2,ꢀAV3,ꢀAV4,ꢀAV5,ꢀAV6ꢀandꢀHDMIꢀ The available sockets may vary according to
EXPANDER,ꢀHDMIꢀMATRIXꢀwhenꢀ
available.ꢀForꢀinformationꢀaboutꢀLINKꢀ
your setup.
>ꢀNamesꢀareꢀshownꢀinꢀtheꢀtelevisionꢀon-
screenꢀdisplayꢀwhenꢀtheꢀsourceꢀisꢀselected.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
STANDBYꢀOPTIONSꢀmenu.ꢀ
equipmentꢀatꢀaꢀlaterꢀdate,ꢀyouꢀ
mustꢀregisterꢀthisꢀequipmentꢀinꢀ
theꢀCONNECTIONSꢀmenu.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbeꢀableꢀtoꢀ
registerꢀaꢀconnectedꢀproductꢀtypeꢀtoꢀtheꢀ
highlightedꢀsocketꢀgroup.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀupꢀandꢀdownꢀ
toꢀmoveꢀbetweenꢀtheꢀsocketsꢀinꢀtheꢀ
group.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀ
seeꢀtheꢀlistꢀofꢀstandbyꢀoptionsꢀforꢀwhenꢀ
theꢀconnectedꢀequipmentꢀshouldꢀswitchꢀ
toꢀstandby.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ
registerꢀwhatꢀyouꢀhaveꢀconnectedꢀtoꢀtheꢀ
highlightedꢀsocket.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀselectꢀaꢀ
standbyꢀoption.ꢀ
>ꢀPressꢀtheꢀcentreꢀbutton toꢀbeꢀableꢀtoꢀ
selectꢀtheꢀproductꢀfromꢀanꢀon-screenꢀlist.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ
seeꢀlistsꢀforꢀotherꢀtypesꢀofꢀproducts.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀorꢀ
aꢀnumberꢀbuttonꢀtoꢀhighlightꢀtheꢀnameꢀofꢀ
theꢀproductꢀandꢀpressꢀtheꢀcentreꢀbuttonꢀ
toꢀregisterꢀit.ꢀ
>ꢀWhenꢀyouꢀhaveꢀcompletedꢀyourꢀsettingsꢀ
forꢀaꢀsingleꢀsocketꢀgroup,ꢀpressꢀtheꢀ
centreꢀbuttonꢀtoꢀreturnꢀtoꢀtheꢀ
CONNECTIONSꢀmenu.ꢀ
>ꢀRepeatꢀtheꢀprocedureꢀforꢀeachꢀsocketꢀ
group.ꢀ
At first-time setup only, when you have
registered all connected equipment, press
the green button to store the setup.
>ꢀPressꢀtheꢀgreenꢀbuttonꢀtoꢀbeꢀableꢀtoꢀ
nameꢀtheꢀsource.ꢀTheꢀnamingꢀmenuꢀisꢀ
nowꢀactivated.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀupꢀandꢀdownꢀ
toꢀfindꢀtheꢀindividualꢀcharactersꢀinꢀtheꢀ
name.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀacceptꢀtheꢀname.ꢀ
11
>> Register additional video equipment
What’s on the AV1 – AV6 menu …
SOURCEꢀ…ꢀSelectꢀtheꢀsourceꢀyouꢀhaveꢀ
connected.ꢀTheꢀoptionꢀyouꢀselectꢀindicatesꢀ
whichꢀremoteꢀcontrolꢀbuttonꢀswitchesꢀonꢀ
theꢀsource.ꢀForꢀexample,ꢀaꢀsourceꢀ
HDMIꢀ…ꢀIndicatesꢀwhetherꢀorꢀnotꢀtheꢀ
equipmentꢀisꢀconnectedꢀtoꢀtheꢀtelevisionꢀ
viaꢀoneꢀofꢀtheꢀHDMIꢀsockets.ꢀSelectꢀtheꢀ
appropriateꢀsocket:ꢀA,ꢀB,ꢀorꢀC.ꢀ
AV2
SOURCE
NAME
IR SOCKET
IR TYPE
HDMI
NONE
. . . . .
NONE
IR
NONE
NO
ꢀ(YPbPr)ꢀ…ꢀIndicatesꢀwhetherꢀorꢀnotꢀtheꢀ
equipmentꢀisꢀconnectedꢀtoꢀtheꢀtelevisionꢀ
viaꢀtheꢀYPbPrꢀsockets.ꢀOptionsꢀareꢀYESꢀ
andꢀNO.ꢀCanꢀonlyꢀbeꢀregisteredꢀinꢀoneꢀofꢀ
theꢀAVꢀmenusꢀ(AV2-AV4ꢀorꢀAV6)ꢀatꢀanyꢀ
time.ꢀ
registeredꢀasꢀV.ꢀMEMꢀisꢀswitchedꢀonꢀwhenꢀ
youꢀpressꢀtheꢀVMEM button.ꢀAꢀsourceꢀ
registeredꢀasꢀDTV2ꢀisꢀswitchedꢀonꢀbyꢀ
pressingꢀLISTꢀandꢀthenꢀtheꢀnavigationꢀ
buttonꢀupꢀorꢀdownꢀtoꢀdisplayꢀDTV2ꢀandꢀ
pressꢀtheꢀcentreꢀbutton.ꢀ(Beo5:ꢀPressꢀ
DTV2).ꢀOptionsꢀare:ꢀ
Y/Pb/Pr
S/P-DIF
NONE
(VGA)ꢀ…ꢀIndicatesꢀwhetherꢀorꢀnotꢀtheꢀ
equipmentꢀisꢀconnectedꢀtoꢀtheꢀtelevisionꢀ
viaꢀtheꢀVGAꢀsocket.ꢀOptionsꢀareꢀYESꢀandꢀ
NO.ꢀ
ꢀ
ꢀ
NONEꢀ…ꢀifꢀnothingꢀisꢀconnected.ꢀ
V.MEMꢀ…ꢀforꢀaꢀconnectedꢀvideoꢀrecorderꢀ
orꢀhardꢀdiskꢀrecorder.ꢀ
Regarding High Definition (HD)
sources …
S/P-DIF …ꢀSelectꢀtheꢀS/P-DIFꢀconnectionꢀ
used.ꢀOptionsꢀareꢀ1,ꢀ2ꢀandꢀNONE.ꢀ
ꢀ
ꢀ
DVD/DVD2ꢀ…ꢀforꢀaꢀconnectedꢀDVDꢀplayerꢀ
orꢀrecorder.
StandardꢀDefinitionꢀ(SD)ꢀsignalsꢀcanꢀbeꢀ
recorded,ꢀasꢀwellꢀasꢀdistributedꢀtoꢀaꢀlinkꢀ
roomꢀtelevision,ꢀbutꢀHDꢀsignalsꢀcannot.ꢀ
DTV2…ꢀforꢀotherꢀequipment,ꢀsuchꢀasꢀaꢀ
set-topꢀbox.
AnꢀHDMIꢀExpanderꢀmustꢀalwaysꢀbeꢀ
connectedꢀtoꢀHDMI C,ꢀwhenꢀpresent,ꢀ
otherwiseꢀtoꢀHDMI B.ꢀWhenꢀconnectingꢀanꢀ
HDMIꢀExpander,ꢀadditionalꢀHDMIꢀsocketsꢀ
ꢀꢀ DTVꢀ…ꢀoccupiedꢀbyꢀtheꢀDVBꢀmodule,ꢀ
unlessꢀyouꢀdisableꢀtheꢀDVBꢀmodule.
ConnectꢀbothꢀtheꢀHDꢀandꢀtheꢀSDꢀsignalsꢀtoꢀ
theꢀtelevision.ꢀTheꢀbestꢀsignalꢀisꢀalwaysꢀused.ꢀ
IfꢀnoꢀHDꢀsignalꢀisꢀavailable,ꢀtheꢀSDꢀsignalꢀisꢀ
shown.ꢀ
ꢀ
V.AUX2ꢀ…ꢀforꢀotherꢀequipment,ꢀsuchꢀasꢀaꢀ becomeꢀavailable;ꢀC1,ꢀC2,ꢀC3ꢀandꢀC4.ꢀ
videoꢀgameꢀconsole.ꢀ
ꢀ
TVꢀ…ꢀoccupiedꢀbyꢀtheꢀTVꢀtuner,ꢀunlessꢀ
youꢀdisableꢀbothꢀtunersꢀinꢀtheꢀTUNERꢀ
SETUPꢀmenu.
Whileꢀitꢀisꢀpossibleꢀtoꢀregisterꢀequipmentꢀ
underꢀanyꢀofꢀtheꢀavailableꢀsourceꢀtypes,ꢀtheꢀ
typeꢀyouꢀselectꢀaffectsꢀhowꢀyouꢀcanꢀuseꢀyourꢀ
source.ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
PCꢀ…ꢀforꢀaꢀconnectedꢀPC.
DECODER …ꢀforꢀaꢀconnectedꢀdecoder.ꢀꢀ
Theꢀsourceꢀlistsꢀareꢀdividedꢀintoꢀ4ꢀgroups;
‘stb’ꢀareꢀset-topꢀboxes,ꢀ‘dvd’ꢀareꢀDVDꢀ
playersꢀandꢀrecorders,ꢀ‘vmem’ꢀareꢀvideoꢀ
recordersꢀincludingꢀhardꢀdiskꢀrecorders,ꢀ
‘other’ꢀare,ꢀforꢀexample,ꢀPCsꢀandꢀmediaꢀ
centres.
NAMEꢀ…ꢀAllowsꢀyouꢀtoꢀnameꢀtheꢀsourceꢀ
youꢀareꢀregistering,ꢀtheꢀnameꢀyouꢀenterꢀ
appearsꢀinꢀtheꢀon-screenꢀdisplayꢀwhenꢀyouꢀ
activateꢀtheꢀsource.ꢀ
(AUTOꢀSELECTION) …ꢀAllowsꢀaꢀsourceꢀ
connectedꢀtoꢀAV5ꢀtoꢀbeꢀselectedꢀ
automaticallyꢀasꢀsoonꢀasꢀtheꢀtelevisionꢀ
detectsꢀaꢀsignal,ꢀprovidedꢀtheꢀtelevisionꢀisꢀ
onꢀatꢀtheꢀtime.ꢀOptionsꢀareꢀONꢀandꢀOFF.ꢀ
IRꢀSOCKET …ꢀSelectꢀwhichꢀIRꢀsocketꢀisꢀusedꢀ
forꢀtheꢀsource,ꢀoptionsꢀareꢀPUC1,ꢀPUC2,ꢀ
PUC3,ꢀPUC4ꢀandꢀNONE.
IRꢀTYPE …ꢀSelectꢀtheꢀtypeꢀofꢀIRꢀconnectionꢀ
used.ꢀOptionsꢀareꢀPLUGꢀ(forꢀaꢀcableꢀ
connection)ꢀandꢀIRꢀ(forꢀanꢀIRꢀblasterꢀ
connection).
12
>> Register additional video equipment
Standby settings …
Whenꢀyouꢀregisterꢀaꢀnon-Bang &ꢀOlufsenꢀ
productꢀinꢀtheꢀCONNECTIONSꢀmenu,ꢀyouꢀ
canꢀalsoꢀselectꢀdifferentꢀ‘STANDBYꢀ
OPTIONS’ꢀforꢀyourꢀproduct.ꢀThisꢀmeansꢀthatꢀ
youꢀcanꢀselectꢀifꢀtheꢀconnectedꢀproductꢀ
shouldꢀswitchꢀtoꢀstandbyꢀautomatically.ꢀ
The options are:
OFFꢀATꢀSOURCEꢀCHANGEꢀ…ꢀTheꢀproductꢀ
switchesꢀtoꢀstandbyꢀimmediatelyꢀwhenꢀ
youꢀselectꢀanotherꢀsource.ꢀ
OFFꢀATꢀTVꢀSTANDBYꢀ…ꢀTheꢀproductꢀ
switchesꢀtoꢀstandbyꢀwhenꢀyouꢀswitchꢀtheꢀ
televisionꢀtoꢀstandby.ꢀ
ALWAYSꢀONꢀ…ꢀTheꢀproductꢀdoesꢀnotꢀswitchꢀ
toꢀstandbyꢀautomatically.ꢀ
MANUALꢀCONTROLꢀ…ꢀTheꢀproductꢀcanꢀbeꢀ
switchedꢀonꢀandꢀoffꢀbyꢀmeansꢀofꢀtheꢀ
remoteꢀcontrol.
13
Camera and headphones sockets
Youꢀcanꢀconnectꢀheadphonesꢀ
andꢀlistenꢀtoꢀaꢀprogramme,ꢀorꢀ
youꢀcanꢀconnectꢀaꢀCamcorderꢀ
andꢀwatchꢀyourꢀhomeꢀmoviesꢀonꢀ
theꢀteleꢀvision.ꢀ
Sockets for temporary connections
PHONES
Youꢀcanꢀconnectꢀstereoꢀheadphonesꢀtoꢀtheꢀ
socketꢀmarkedꢀPHONES.ꢀ
PHONES
–ꢀ Whenꢀtheꢀsoundꢀinꢀtheꢀspeakersꢀisꢀnotꢀ
R
muted,ꢀvolumeꢀadjustmentꢀisꢀdirectedꢀatꢀ
L
theꢀspeakers.ꢀ
VIDEO
–ꢀ Toꢀmuteꢀtheꢀspeakersꢀconnectedꢀtoꢀtheꢀ
television,ꢀpressꢀtheꢀmiddleꢀofꢀtheꢀ
button.ꢀ
ꢀ
ꢀ
–ꢀ Whenꢀsoundꢀisꢀmutedꢀinꢀtheꢀspeakers,ꢀ
pressꢀ ꢀorꢀ ꢀtoꢀadjustꢀsoundꢀinꢀ
headphones.ꢀ
–ꢀ Toꢀrestoreꢀsoundꢀinꢀtheꢀspeakers,ꢀpressꢀtheꢀ
middleꢀofꢀtheꢀ
ꢀ
ꢀbutton.ꢀ
Note: Prolonged listening at high volume
levels can cause hearing damage!
R – L
Forꢀaudioꢀconnectionꢀ(rightꢀandꢀleftꢀsoundꢀ
channelꢀrespectively).ꢀ
VIDEO
Forꢀconnectionꢀofꢀtheꢀvideoꢀsignal.ꢀ
Watch digital pictures on your television
Toꢀwatchꢀyourꢀcameraꢀpictures,ꢀconnectꢀtheꢀ
cameraꢀtoꢀtheꢀAV5ꢀsocket(s)ꢀandꢀswitchꢀtheꢀ
televisionꢀon.ꢀTheꢀteleꢀvisionꢀautoꢀmaticallyꢀ
registersꢀtheꢀsignalꢀandꢀyouꢀcanꢀseeꢀtheꢀstillꢀ
picturesꢀonꢀtheꢀscreen.ꢀ
If the signal from the camera is switched
off …
>ꢀPressꢀLIST repeatedlyꢀtoꢀdisplayꢀCAMERA*ꢀ
onꢀBeo4ꢀandꢀpressꢀtheꢀcentreꢀbutton.
(Beo5:ꢀPressꢀCamera).ꢀ
*In order to display CAMERA on Beo4, you
must first add it to the Beo4 list of functions.
For further information, see the Guide
enclosed with Beo4.
14
Edit tuned TV channels
Ifꢀautomaticꢀtuningꢀofꢀallꢀ
Move, name or delete tuned TV channels
channelsꢀhasꢀnotꢀstoredꢀtheꢀ
channelsꢀonꢀyourꢀpreferredꢀ
channelꢀnumbersꢀorꢀhasꢀnotꢀ
namedꢀallꢀtheꢀstoredꢀchannelsꢀ
automatically,ꢀyouꢀcanꢀrearrangeꢀ
theꢀorderꢀinꢀwhichꢀtheꢀchannelsꢀ
appearꢀandꢀprovideꢀthemꢀwithꢀaꢀ
nameꢀofꢀyourꢀownꢀchoice.ꢀ
Once automatic tuning of channels has
been completed, the EDIT CHANNELS
menu appears automatically and you
can move or name the TV channels that
have been tuned in. You can also delete
any tuned TV channel you do not want.
Move tuned TV channels …
>ꢀInꢀtheꢀEDITꢀCHANNELSꢀmenu,ꢀhighlightꢀ
theꢀchannelꢀyouꢀwishꢀtoꢀmove.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀrightꢀtoꢀmoveꢀ
theꢀchannelꢀoutꢀofꢀtheꢀlist.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀ
moveꢀtheꢀchannelꢀtoꢀtheꢀdesiredꢀchannelꢀ
number.ꢀ
Enter the EDIT CHANNELS menu …
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ >ꢀUseꢀtheꢀnavigationꢀbuttonꢀleftꢀtoꢀmoveꢀtheꢀ
TUNING.ꢀ
channelꢀbackꢀintoꢀtheꢀlistꢀorꢀchangeꢀplacesꢀ
withꢀtheꢀchannelꢀwhichꢀoccupiesꢀtheꢀ
desiredꢀchannelꢀnumber.ꢀ
Ifꢀtheꢀtunedꢀchannelsꢀrequireꢀ
additionalꢀediting,ꢀsuchꢀasꢀfineꢀ
tuning,ꢀuseꢀtheꢀMANUALꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
TUNINGꢀmenuꢀandꢀhighlightꢀEDITꢀ
CHANNELS.ꢀ
>ꢀNow,ꢀmoveꢀtheꢀchannelꢀwithꢀwhichꢀyouꢀ
haveꢀchangedꢀplacesꢀtoꢀanꢀemptyꢀchannelꢀ
numberꢀorꢀtoꢀaꢀnumberꢀalreadyꢀoccupiedꢀ
andꢀrepeatꢀtheꢀprocedure.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
EDITꢀCHANNELSꢀmenu.ꢀ
For tuning of digital channel, see the
Guide for your DVB module.
>ꢀWhenꢀyouꢀhaveꢀmovedꢀtheꢀrelevantꢀ
channels,ꢀpressꢀBACKꢀtoꢀbackꢀupꢀthroughꢀ
menus,ꢀorꢀpressꢀandꢀholdꢀBACKꢀtoꢀexitꢀallꢀ
menus.ꢀ
15
>> Edit tuned TV channels
Delete tuned channels …
Name tuned channels …
EDIT CHANNELS
1
2 TV 2
>ꢀInꢀtheꢀEDITꢀCHANNELSꢀmenuꢀhighlightꢀtheꢀ >ꢀInꢀtheꢀEDITꢀCHANNELSꢀmenuꢀhighlightꢀtheꢀ
channelꢀyouꢀwishꢀtoꢀname.
channelꢀyouꢀwishꢀtoꢀdelete.
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀrightꢀtoꢀmoveꢀ
theꢀchannelꢀoutꢀofꢀtheꢀlist.ꢀ
>ꢀPressꢀtheꢀgreenꢀbuttonꢀtoꢀbeꢀableꢀtoꢀ
nameꢀtheꢀchannel.ꢀTheꢀnamingꢀmenuꢀisꢀ
nowꢀactivated.ꢀ
3
. . . . .
4
BBC 1
>ꢀPressꢀtheꢀyellowꢀbuttonꢀtoꢀbeꢀableꢀtoꢀ
deleteꢀtheꢀchannel.ꢀ
5
6
EUROSPORT
TV 4
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀupꢀandꢀdownꢀtoꢀ
findꢀtheꢀindividualꢀcharactersꢀinꢀtheꢀname.
>ꢀMoveꢀbetweenꢀcharacterꢀplacesꢀwithꢀtheꢀ
navigationꢀbuttonꢀleftꢀandꢀright.
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀname.ꢀ
>ꢀIfꢀnecessary,ꢀrepeatꢀtheꢀprocedureꢀandꢀ
nameꢀotherꢀchannelꢀnumbers.ꢀ
7
ZDF
>ꢀPressꢀtheꢀyellowꢀbuttonꢀagainꢀtoꢀconfirmꢀ
theꢀdeletion,ꢀorꢀpressꢀtheꢀnavigationꢀ
buttonꢀleftꢀtwiceꢀtoꢀmoveꢀtheꢀchannelꢀ
backꢀintoꢀtheꢀlist.ꢀ
8
. . . . .
9
DISCOVER
10
>ꢀWhenꢀyouꢀhaveꢀdeletedꢀtheꢀrelevantꢀ
channels,ꢀpressꢀandꢀholdꢀBACK toꢀexitꢀallꢀ
menus.ꢀ
Move a channel.
>ꢀWhenꢀyouꢀhaveꢀnamedꢀtheꢀrelevantꢀ
channels,ꢀpressꢀtheꢀcentreꢀbuttonꢀtoꢀ
acceptꢀyourꢀeditedꢀlist,ꢀorꢀpressꢀandꢀholdꢀ
BACK toꢀexitꢀallꢀmenusꢀwithoutꢀstoring.ꢀ
ꢀ
EDIT CHANNELS
1
2
TV 2
3
4
A . . . .
BBC 1
5
6
EUROSPORT
TV 4
7
ZDF
8
. . . . .
9
DISCOVER
10
Name a channel.
EDIT CHANNELS
1
2
TV 2
3
. . . . .
4
BBC 1
5
6
EUROSPORT
TV 4
7
ZDF
8
. . . . .
9
DISCOVER
10
Delete a channel.
16
>> Edit tuned TV channels
Adjust tuned channels
You can store TV channels on channel
numbers of their own. Fine tune the
IfꢀtheꢀitemꢀTVꢀSYSTEMꢀappearsꢀonꢀtheꢀmenu,ꢀ
thenꢀmakeꢀsureꢀthatꢀtheꢀcorrectꢀbroadcastꢀ
MANUAL TUNING
channel reception, indicate the presence systemꢀisꢀdisplayedꢀbeforeꢀyouꢀbeginꢀtuning.ꢀ
FREQUENCY
CHANNEL NO.
NAME
FINE TUNE
DECODER
TV SYSTEM
SOUND
217
7
DR 1
0
of coded channels and choose
appropriate sound types for the
individual channels.
Ifꢀchannelsꢀareꢀbroadcastedꢀwithꢀtwoꢀ
languagesꢀandꢀyouꢀwantꢀbothꢀlanguages,ꢀ
youꢀcanꢀstoreꢀtheꢀchannelꢀtwice,ꢀonceꢀwithꢀ
OFF
PAL B/G
STEREO
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ eachꢀlanguage.ꢀ
TUNING.ꢀ
>ꢀPressꢀtheꢀcentreꢀbutton toꢀbringꢀupꢀtheꢀ
TUNINGꢀmenuꢀandꢀhighlightꢀMANUALꢀ
TUNING.ꢀ
Even though you store a type of sound/
language, you can switch between the various
types while watching a TV programme.
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
MANUALꢀTUNINGꢀmenu.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀupꢀandꢀdownꢀtoꢀ
moveꢀbetweenꢀtheꢀitemsꢀinꢀtheꢀmenu.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀleftꢀandꢀrightꢀtoꢀ
viewꢀyourꢀchoicesꢀforꢀeachꢀitem.ꢀ
>ꢀIfꢀyouꢀchooseꢀNAME,ꢀthenꢀpressꢀtheꢀ
greenꢀbuttonꢀtoꢀstartꢀtheꢀnamingꢀ
procedure.ꢀUseꢀtheꢀnavigationꢀbuttonꢀupꢀ
andꢀdownꢀtoꢀenterꢀtheꢀcharactersꢀinꢀtheꢀ
nameꢀyouꢀchoose.ꢀUseꢀtheꢀnavigationꢀ
buttonꢀleftꢀandꢀrightꢀtoꢀmoveꢀbetweenꢀtheꢀ
charactersꢀinꢀtheꢀname.ꢀ
>ꢀWhenꢀyouꢀhaveꢀfinishedꢀediting,ꢀpressꢀtheꢀ
centre buttonꢀtoꢀacceptꢀtheꢀsettings.ꢀ
>ꢀPressꢀtheꢀcentre button toꢀstoreꢀtheꢀ
adjustedꢀchannel.ꢀ
>ꢀPressꢀandꢀholdꢀBACK toꢀexitꢀallꢀmenus.ꢀ
17
Re-tune or add channels
You can re-tune all your TV channels by
letting the television tune in all the
channels automatically. You can also add
a new channel or update a tuned
channel which, for example, has been
moved by the broadcaster.
Youꢀcanꢀmakeꢀyourꢀtelevisionꢀfindꢀ
yourꢀTVꢀchannelsꢀforꢀyou.ꢀ
AUTO TUNING
1 . . . . .
Presetꢀupꢀtoꢀ99ꢀdifferentꢀTVꢀ
channelsꢀonꢀchannelꢀnumbersꢀofꢀ
theirꢀownꢀandꢀgiveꢀeachꢀchannelꢀ
aꢀdistinctꢀname.ꢀ
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ NOTE! If you re-tune all your TV channels, all
TUNING.ꢀ
the channel settings you have made
disappear!
Youꢀcanꢀtuneꢀinꢀnewꢀchannels,ꢀ
forꢀexample,ꢀifꢀyouꢀmoveꢀ–ꢀorꢀ
re-tuneꢀpreviouslyꢀdeletedꢀ
channels.ꢀ
>ꢀPressꢀtheꢀcentreꢀbutton toꢀbringꢀupꢀtheꢀ
TUNINGꢀmenu.ꢀ
EDIT CHANNELS
..... . . . . . . . . . . . . . . .
31 PRIME
32TV 2
33 . . . . .
34 BBC 1
35 EUROSPORT
36 TV 4
37 ZDF
38 . . . . .
Re-tune via automatic tuning …
>ꢀInꢀtheꢀTUNINGꢀmenuꢀhighlightꢀAUTOꢀ
TUNING.ꢀ
Whenꢀtuningꢀinꢀchannelsꢀviaꢀtheꢀ
ADDꢀCHANNELSꢀmenu,ꢀyourꢀ
previouslyꢀtunedꢀchannelsꢀareꢀ
leftꢀunchanged.ꢀThisꢀallowsꢀyouꢀ
toꢀkeepꢀchannelꢀnames,ꢀtheirꢀ
orderꢀinꢀtheꢀTVꢀlist,ꢀandꢀanyꢀ
specialꢀsettingsꢀyouꢀmayꢀhaveꢀ
storedꢀforꢀthoseꢀchannels.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
AUTOꢀTUNINGꢀmenu.
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀrightꢀtoꢀstartꢀ
autoꢀtuning.ꢀ
>ꢀOnceꢀautoꢀtuningꢀisꢀcompleted,ꢀtheꢀEDITꢀ
CHANNELSꢀmenuꢀappears.ꢀYouꢀcanꢀthenꢀ
removeꢀorꢀnameꢀchannels.ꢀ
39 DISCOVER
40 . . . . .
Add new TV channels …
>ꢀInꢀtheꢀTUNINGꢀmenuꢀhighlightꢀADDꢀ
CHANNELS.ꢀꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
ADDꢀCHANNELSꢀmenu.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀrightꢀtoꢀstart.ꢀ
Newꢀchannelsꢀareꢀaddedꢀautomaticallyꢀasꢀ
theyꢀareꢀfound.ꢀ
>ꢀWhenꢀtuningꢀisꢀcompletedꢀandꢀnewꢀ
channelsꢀhaveꢀbeenꢀadded,ꢀtheꢀEDITꢀ
CHANNELSꢀmenuꢀappears.ꢀYouꢀcanꢀthenꢀ
removeꢀorꢀnameꢀchannels.ꢀTheꢀcursorꢀ
highlightsꢀtheꢀfirstꢀnewꢀchannelꢀjustꢀaddedꢀ
toꢀtheꢀlist.ꢀ
18
Loudspeaker setup – surround sound
AddꢀPowerꢀLinkꢀspeakersꢀandꢀaꢀ
BeoLabꢀsubwooferꢀtoꢀyourꢀ
televisionꢀandꢀyouꢀhaveꢀaꢀ
surroundꢀsoundꢀsystem.
Select your speaker types
Switch on the television before you
SPEAKER TYPE
adjust speaker settings.
FRONT
REAR
SUBWOOFER
BEOLAB 8000
BEOLAB 4000
YES
To register the speaker types …
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ
OPTIONS.ꢀ
Aꢀsurroundꢀsoundꢀsetupꢀfitsꢀ
easilyꢀintoꢀyourꢀlivingꢀroom.ꢀLetꢀ
theꢀpictureꢀdetermineꢀyourꢀidealꢀ
viewingꢀandꢀlisteningꢀposition.ꢀ
Youꢀgetꢀtheꢀbestꢀsoundꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
OPTIONSꢀmenuꢀandꢀhighlightꢀSOUND.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
SOUNDꢀmenuꢀandꢀhighlightꢀSPEAKERꢀ
TYPE.ꢀ
At least one front speaker must be
configured in the SPEAKER TYPE menu, to
make the menus SPEAKER DISTANCE and
SPEAKER LEVEL available.
experienceꢀinꢀtheꢀareaꢀcreatedꢀbyꢀ
theꢀspeakers.
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
SPEAKERꢀTYPEꢀmenuꢀandꢀuseꢀtheꢀ
navigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀrevealꢀ
yourꢀspeakerꢀtype.ꢀ
>ꢀPressꢀtheꢀnavigationꢀbuttonꢀdownꢀtoꢀmoveꢀ
toꢀtheꢀnextꢀspeakerꢀandꢀuseꢀtheꢀnavigationꢀ
buttonꢀleftꢀorꢀrightꢀtoꢀrevealꢀyourꢀspeakerꢀ
type.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀorꢀpressꢀ
BACKꢀtoꢀleaveꢀtheꢀmenuꢀwithoutꢀstoring.ꢀ
19
>> Loudspeaker setup – surround sound
Set speaker distance
Switch on the television from your
favourite viewing position. Enter the
straight-line distances in metres
between your position and the
individual speakers.
SPEAKER DISTANCE
CENTRE
1.0 M
1.0 M
1.0 M
1.0 M
1.0 M
1.0 M
LEFT FRONT
RIGHT FRONT
RIGHT REAR
LEFT REAR
SUBWOOFER
To set the speaker distances …
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ
OPTIONS.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
OPTIONSꢀmenuꢀandꢀhighlightꢀSOUND.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
SOUNDꢀmenuꢀandꢀhighlightꢀSPEAKERꢀ
DISTANCE.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
SPEAKERꢀDISTANCEꢀmenu.ꢀ
LEFT
FRONT
RIGHT
FRONT
CENTRE
>ꢀMoveꢀtheꢀcursorꢀfromꢀspeakerꢀtoꢀspeakerꢀ
andꢀuseꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀ
toꢀselectꢀtheꢀapproximateꢀstraight-lineꢀ
distanceꢀinꢀmetresꢀbetweenꢀyourꢀviewingꢀ
positionꢀandꢀeachꢀofꢀtheꢀspeakers.ꢀ
>ꢀWhenꢀyouꢀhaveꢀenteredꢀtheꢀappropriateꢀ
speakerꢀdistances,ꢀpressꢀtheꢀcentreꢀ
buttonꢀtoꢀstoreꢀorꢀpressꢀBACKꢀtoꢀleaveꢀtheꢀ
menuꢀwithoutꢀstoring.ꢀ
LEFT
REAR
RIGHT
REAR
20
>> Loudspeaker setup – surround sound
Calibrate the sound level
When you have connected speakers in a
surround sound setup to the television,
you must perform a speaker calibration.
SPEAKER LEVEL
SEQUENCE
MANUAL
.... . . . . . .
.... . . . . . .
.... . . . . . .
.... . . . . . .
LEFT FRONT
RIGHT FRONT
RIGHT REAR
LEFT REAR
A calibration sound is produced
alternately in each of the speakers you
have connected in your surround sound
setup. Your task is to adjust the sound
level from all the connected speakers to
match the sound level from the centre
speaker. You can choose whether you
want the sound sequence to occur
automatically or manually.
To calibrate the sound level …
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀ
highlightꢀOPTIONS.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
OPTIONSꢀmenuꢀandꢀhighlightꢀSOUND.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
SOUNDꢀmenuꢀandꢀhighlightꢀSPEAKERꢀ
LEVEL.ꢀ
Once you have performed your speaker
calibration, you will only need to re-
calibrate the speaker sound if you make
changes to the setup, for example, if
you move one or more of the speakers.
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
SPEAKERꢀLEVELꢀmenu.ꢀSEQUENCEꢀisꢀ
highlighted.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ
chooseꢀbetweenꢀAUTOMATICꢀandꢀ
MANUAL.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ
adjustꢀtheꢀspeakerꢀsoundꢀandꢀuseꢀtheꢀ
navigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀmoveꢀtoꢀ
anotherꢀspeaker.ꢀ
>ꢀWhenꢀyouꢀhaveꢀadjustedꢀtheꢀsoundꢀforꢀallꢀ
theꢀspeakersꢀinꢀyourꢀsurroundꢀsoundꢀsetup,ꢀ
pressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀorꢀpressꢀ
BACK toꢀleaveꢀtheꢀmenuꢀwithoutꢀstoring.
21
>> Loudspeaker setup – surround sound
See the name of the active sound system
You can see the name of the active
SOUND SYSTEM
sound system for a source or programme
on the screen. However, it is not possible
to adjust or preset a sound system.
INPUT FORMAT:
MONO/STEREO
OUTPUT FORMAT:
STEREO
SPEAKER 1
To see the active sound system …
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ
OPTIONS.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
OPTIONSꢀmenuꢀandꢀhighlightꢀSOUND.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
SOUNDꢀSETUPꢀmenuꢀandꢀhighlightꢀ
SOUNDꢀSYSTEM.ꢀ
An example of a sound system that can
appear in the menu.
>ꢀPressꢀtheꢀcentreꢀbutton toꢀbringꢀupꢀtheꢀ
SOUNDꢀSYSTEMꢀmenu.ꢀTheꢀactiveꢀsoundꢀ
systemꢀisꢀshown.ꢀ
Your speaker combination does not need to
match the number of available channels for
the sound system to be in effect.
>ꢀPressꢀandꢀholdꢀBACKꢀtoꢀleaveꢀallꢀmenus.ꢀ
22
Adjust picture and sound settings
Pictureꢀandꢀsoundꢀsettingsꢀareꢀ
presetꢀfromꢀtheꢀfactoryꢀtoꢀ
neutralꢀvaluesꢀwhichꢀsuitꢀmostꢀ
viewingꢀandꢀlisteningꢀsituations.ꢀ
However,ꢀifꢀyouꢀwish,ꢀyouꢀcanꢀ
adjustꢀtheseꢀsettingsꢀtoꢀyourꢀ
liking.ꢀ
Adjust brightness, colour or contrast
Adjust the picture settings via the
PICTURE
PICTURE menu. Temporary settings are
cancelled when you switch off the
television.
BRIGHTNESS
CONTRAST
COLOUR
TINT
.... . . . .
.... . . . .
.... . . . .
.... . . . .
.... . . . .
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀ
highlightꢀOPTIONS.ꢀꢀ
SIZE
GAME MODE
Adjustꢀpictureꢀbrightness,ꢀ
contrastꢀorꢀcolour.ꢀSoundꢀ
settingsꢀincludeꢀvolume,ꢀbassꢀ
andꢀtreble.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
OPTIONSꢀmenuꢀandꢀhighlightꢀPICTURE.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
PICTUREꢀmenu.
When signals are sent in format 720p,
1080p or 1080i, the menu item SIZE is
available in the PICTURE menu.
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀ
moveꢀthroughꢀmenuꢀitems.
Storeꢀyourꢀpictureꢀandꢀsoundꢀ
settingsꢀtemporarilyꢀ–ꢀuntilꢀyourꢀ
televisionꢀisꢀswitchedꢀoffꢀ–ꢀorꢀ
storeꢀthemꢀpermanently.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ
adjustꢀtheꢀvalues.
>ꢀPressꢀBACK toꢀstoreꢀyourꢀsettingsꢀuntilꢀ
youꢀswitchꢀoffꢀtheꢀtelevision,ꢀor
>ꢀ…ꢀpressꢀtheꢀcentreꢀbutton toꢀstoreꢀyourꢀ
settingsꢀpermanently.
ActivateꢀGAMEꢀMODEꢀifꢀyouꢀ
connectꢀaꢀgameꢀconsoleꢀtoꢀyourꢀ
television.
ForꢀvideoꢀsourcesꢀusingꢀtheꢀVGAꢀsignal,ꢀtheꢀ
followingꢀoptionsꢀappearꢀasꢀwell:
HOR.ꢀSIZEꢀ…ꢀAdjustsꢀtheꢀpictureꢀsizeꢀalongꢀ
theꢀhorizontalꢀaxis.
Forꢀinformationꢀaboutꢀhowꢀtoꢀ
changeꢀtheꢀpictureꢀformat,ꢀseeꢀ
GettingꢀStarted.ꢀ
VERT.ꢀSIZEꢀ…ꢀAdjustsꢀtheꢀpictureꢀsizeꢀalongꢀ
theꢀverticalꢀaxis.ꢀ
HOR.ꢀPOSITIONꢀ…ꢀAdjustsꢀtheꢀpictureꢀ
positionꢀalongꢀtheꢀhorizontalꢀaxis.ꢀ
VERT.ꢀPOSITIONꢀ…ꢀAdjustsꢀtheꢀpictureꢀ
positionꢀalongꢀtheꢀverticalꢀaxis.ꢀ
Noteꢀthatꢀtheseꢀfourꢀsettingsꢀonlyꢀapplyꢀforꢀ
theꢀscreenꢀresolutionꢀinꢀeffectꢀatꢀtheꢀtimeꢀ
youꢀadjustꢀtheꢀsettings.ꢀ
To temporarily remove the picture from the
screen, press LIST and use the navigation
button up or down to bring up P.MUTE in
the Beo4 display and press the centre
button. To restore the picture, press a
source button. (Beo5: Press
to bring up
the Scene display on Beo5, press Picture,
then press P.Mute. To restore the picture,
press P.Mute again).
23
>> Adjust picture and sound settings
Game mode
If you connect a game console or play a
PC game using the television as a
To activate GAME MODE with Beo5
directly …
monitor, you can activate ‘Game mode’.
Game mode minimises the delay caused
by signal processing. Game mode is
automatically deactivated when you
change source or switch to standby.
>ꢀPressꢀGame toꢀactivateꢀGAMEꢀMODE,ꢀ
pressꢀagainꢀtoꢀdeactivateꢀGAMEꢀMODE.
To use GAME MODE …
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀ
highlightꢀOPTIONS.ꢀꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
OPTIONSꢀmenuꢀandꢀhighlightꢀPICTURE.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
PICTUREꢀmenu.
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀ
moveꢀtoꢀGAMEꢀMODE.
>ꢀPressꢀtheꢀcentreꢀbuttonꢀrepeatedlyꢀtoꢀ
switchꢀbetweenꢀONꢀandꢀOFF.
To activate GAME MODE with Beo4
directly …
>ꢀPressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ
upꢀorꢀdownꢀtoꢀbringꢀupꢀGAMEꢀinꢀtheꢀ
Beo4ꢀdisplay.
>ꢀPressꢀtheꢀcentreꢀbuttonꢀrepeatedlyꢀtoꢀ
switchꢀbetweenꢀONꢀandꢀOFF.
24
>> Adjust picture and sound settings
Adjust volume, bass or treble
Sound settings are preset at the factory
to neutral values which suit most
listening situations. However, if you
wish, you can adjust these settings to
your liking.
To adjust sound …
ADJUSTMENT
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ
OPTIONS.
VOLUME
BASS
TREBLE
SUBWOOFER
LOUDNESS
DEFAULT VIDEO
DEFAULT AUDIO
.... . . . .
.... . . . .
.... . . . .
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
OPTIONSꢀmenuꢀandꢀhighlightꢀSOUND.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
SOUNDꢀmenu,ꢀandꢀhighlightꢀ
.... . . . .
ON
SPEAKER3
SPEAKER2
You can preset levels for sound volume,
bass, treble and a subwoofer.
ADJUSTMENT.
>ꢀPressꢀtheꢀcentreꢀbutton toꢀbringꢀupꢀtheꢀ
ADJUSTMENTꢀmenu.
You can switch the loudness feature on
or off. The loudness feature
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀ
selectꢀanꢀitemꢀtoꢀadjust.
compensates for the human ear’s lack of
sensitivity to high and low frequencies.
These frequencies are boosted at low
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ
adjustꢀtheꢀvaluesꢀorꢀchooseꢀaꢀsetting.ꢀ
The content of the ADJUSTMENT menu
varies according to what you have
volume levels so that low music becomes >ꢀPressꢀBACK toꢀstoreꢀyourꢀsettingsꢀuntilꢀyouꢀ connected to the television.
more dynamic.
switchꢀoffꢀyourꢀtelevision,ꢀor …ꢀ
>ꢀ… pressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀyourꢀ
settingsꢀpermanently.ꢀ
In addition, you can preset two default
speaker combinations; one to be used
each time you switch on a video source
in your television, and one to be used
each time you switch on an audio source
connected to your television. You can
still select a different speaker combination
any time you wish.
For further information about speaker
25
Daily use of speaker combinations
Youꢀcanꢀextendꢀyourꢀtelevisionꢀintoꢀ Select speakers for movie sound
aꢀsurroundꢀsoundꢀsystemꢀbyꢀaddingꢀ
You can select the speaker combination
Bangꢀ&ꢀOlufsenꢀloudspeakersꢀandꢀaꢀ
that suits the source you are using,
BeoLabꢀsubwoofer.ꢀ
provided that the various speaker
modes are available in your television.
Whenꢀyouꢀswitchꢀonꢀoneꢀofꢀtheꢀ
sources,ꢀtheꢀtelevisionꢀautomaticallyꢀ
>ꢀPressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ
selectsꢀtheꢀappropriateꢀspeakers,ꢀ
upꢀorꢀdownꢀtoꢀbringꢀupꢀSPEAKERꢀinꢀtheꢀ
dependingꢀonꢀwhatꢀkindꢀofꢀsoundꢀ
suitsꢀtheꢀsourceꢀyouꢀareꢀusing.ꢀTheꢀ
speakerꢀcombinationꢀisꢀoptimisedꢀifꢀ
youꢀselectꢀSPEAKERꢀinꢀtheꢀBeo4ꢀ
displayꢀandꢀpressꢀtheꢀcentreꢀbuttonꢀ
onꢀBeo4.ꢀ
Beo4ꢀdisplayꢀ(Beo5:ꢀPressꢀ ꢀtoꢀbringꢀupꢀ
theꢀSceneꢀdisplayꢀonꢀBeo5,ꢀthenꢀpressꢀ
Speakerꢀtoꢀbringꢀupꢀthe Speakerꢀdisplay).ꢀ
>ꢀPressꢀtheꢀcentreꢀbutton,ꢀifꢀyouꢀwantꢀtoꢀ
optimiseꢀtheꢀsound,ꢀorꢀpressꢀ1 – 5ꢀtoꢀ
selectꢀtheꢀspeakerꢀcombinationꢀyouꢀwant.ꢀ
(Beo5:ꢀPressꢀOptimise orꢀModeꢀ1ꢀ–ꢀ5).ꢀ
Theꢀselectedꢀspeakersꢀcutꢀinꢀautomatically.ꢀ
>ꢀPressꢀandꢀholdꢀBACK toꢀremoveꢀSPEAKERꢀ
fromꢀtheꢀBeo4ꢀdisplayꢀandꢀreturnꢀtoꢀtheꢀ
sourceꢀyouꢀwereꢀusing.ꢀ(Beo5:ꢀPressꢀ toꢀ
removeꢀtheꢀSpeakerꢀdisplay).ꢀ
SPEAKER 1
SPEAKER 2
SPEAKER 3
SPEAKER 4
SPEAKER 5
NOTE! If you have added only two front
speakers to the TV, you will only be able
to choose SPEAKER 1 – 3.
Adjust speaker balance with
Beo4
You can temporarily adjust the balance
between the speakers.
>ꢀPressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ
upꢀorꢀdownꢀtoꢀbringꢀupꢀBALANCEꢀinꢀtheꢀ
Beo4ꢀdisplayꢀandꢀpressꢀtheꢀcentreꢀbutton.ꢀ
>ꢀNowꢀuseꢀ ,ꢀ ,ꢀ ꢀandꢀ ꢀtoꢀadjustꢀtheꢀ
speakerꢀbalanceꢀfront,ꢀback,ꢀleftꢀandꢀright.
>ꢀPressꢀandꢀholdꢀBACKꢀtoꢀremoveꢀSPEAKERꢀ
fromꢀtheꢀBeo4ꢀdisplayꢀandꢀreturnꢀtoꢀtheꢀ
sourceꢀyouꢀwereꢀusing.ꢀ
26
Set the television to switch itself on or off
Yourꢀtelevisionꢀhasꢀaꢀbuiltꢀinꢀ
SleepꢀTimerꢀwhichꢀmeansꢀthatꢀ
youꢀcanꢀmakeꢀitꢀswitchꢀoffꢀafterꢀ
aꢀdesignatedꢀnumberꢀofꢀminutes.
Sleep Timer
Play Timer
You can make the television switch off
If you connect a Bang & Olufsen audio
automatically after a number of minutes. or video product to your television with
a Master Link cable, you can exclude or
To activate the Sleep Timer with Beo4 …
include it in timed functions via the
Alsoꢀyouꢀcanꢀmakeꢀtheꢀtelevisionꢀ
reactꢀtoꢀaꢀTimerꢀPlayꢀ
>ꢀPressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ
PLAY TIMER menu. For example, set the
upꢀorꢀdownꢀtoꢀbringꢀupꢀSLEEPꢀinꢀtheꢀBeo4ꢀ television Play Timer to ON and an audio
programmedꢀonꢀanꢀAudioꢀorꢀ
VideoꢀMasterꢀconnectedꢀtoꢀtheꢀ
televisionꢀviaꢀMasterꢀLink.
display.
system’s Play Timer to OFF if you wish
timed functions to apply only to the
television.
>ꢀPressꢀtheꢀcentreꢀbuttonꢀrepeatedlyꢀtoꢀ
selectꢀtheꢀnumberꢀofꢀminutes.
IfꢀtheꢀTimerꢀPlayꢀsourceꢀisꢀDTV,ꢀ
settingsꢀmustꢀbeꢀmadeꢀinꢀtheꢀ
DTVꢀPLAYꢀTIMERꢀmenu.
To deactivate the Sleep Timer with
Beo4 …
To switch on the Play Timer …
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ
PLAYꢀTIMER.ꢀ
>ꢀPressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ
upꢀorꢀdownꢀtoꢀbringꢀupꢀSLEEPꢀinꢀtheꢀBeo4ꢀ >ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
display.
PLAYꢀTIMERꢀmenu,ꢀandꢀhighlightꢀTIMERꢀ
ON/OFF.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀrepeatedlyꢀuntilꢀ
OFFꢀisꢀshownꢀinꢀtheꢀtelevisionꢀdisplay.
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
TIMERꢀON/OFFꢀmenu.ꢀ
To activate or deactivate the Sleep Timer >ꢀUseꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ
with Beo5 …
revealꢀON.ꢀ
>ꢀPressꢀSleepꢀandꢀselectꢀtheꢀnumberꢀofꢀ
minutesꢀorꢀOff.
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀ
setting.
To set the Sleep Timer via the menu …
For further information about how to
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ program Timers and switch the Play Timer
SLEEPꢀTIMER.ꢀ
on or off for a connected Bang & Olufsen
audio or video product, see the Guide
enclosed with the product.
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
SLEEPꢀTIMERꢀmenu.
>ꢀPressꢀtheꢀcentreꢀbuttonꢀrepeatedlyꢀtoꢀ
switchꢀbetweenꢀtheꢀnumberꢀofꢀminutesꢀ
andꢀOFF.
27
>> Set the television to switch itself on or off
DTV Play Timer
Auto standby
You can program a Play Timer on a
connected Bang & Olufsen audio or
video product. If the Play Timer uses the
DVB Module in the television as source,
you must tell it which MODE it should
start in. That is should radio or television
switch on. Also you must tell it which
GROUP, that is which of the station or
channel groups should be used when
the Play Timer is executed.
The television can be set to switch itself
to standby after some time with no
operation. The factory setting is 4 hours.
This function only applies in video mode
not in audio mode.
DTV PLAY TIMER
MODE
GROUP
TV
SPORT
To activate the auto standby …
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ
OPTIONS.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
OPTIONSꢀmenuꢀandꢀhighlightꢀAUTOꢀ
STANDBY.
DTV PLAY TIMER menu
To make settings for a DTV Play Timer …
AUTO STANDBY
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ >ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
OPTIONS.ꢀ
AUTOꢀSTANDBYꢀmenu.ꢀ
AFTER 1 HOUR
AFTER 2 HOURS
AFTER 4 HOURS
OFF
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
OPTIONSꢀmenuꢀandꢀhighlightꢀDTVꢀPLAYꢀ
TIMER.
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀ
selectꢀtheꢀsettingꢀyouꢀwant.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀ
setting.
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
DTVꢀPLAYꢀTIMERꢀmenu,ꢀandꢀuseꢀtheꢀ
navigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀmoveꢀ
betweenꢀMODEꢀandꢀGROUP.
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ
selectꢀtheꢀsettingꢀyouꢀwant.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀ
setting.
>ꢀPressꢀBACKꢀtoꢀbackꢀupꢀthroughꢀpreviousꢀ
menusꢀorꢀpressꢀandꢀholdꢀBACK toꢀexitꢀallꢀ
menus.ꢀ
AUTO STANDBY menu
When you have activated the function, a
message appears on your television screen if
the television has not been operated during
the time set in the menu. The television then
switches to standby, if you do not operate it.
>ꢀPressꢀBACKꢀtoꢀbackꢀupꢀthroughꢀpreviousꢀ
menusꢀorꢀpressꢀandꢀholdꢀBACK toꢀexitꢀallꢀ
menus.ꢀ
Note! If the TV tuner is disabled, and the
DVB module is activated by pressing TV on
the remote control, the name of the menu is
TV PLAY TIMER.
Also remember to set the PLAY TIMER menu
to ON, if the television or its speakers are to
be activated by the Play Timer.
28
Set up your Beo4 remote control
Youꢀmustꢀsetꢀupꢀyourꢀtelevisionꢀ
toꢀbeꢀoperatedꢀwithꢀaꢀBeo4ꢀwith,ꢀ
orꢀwithoutꢀaꢀnavigationꢀbutton.
Beo4 type
In the BEO4 SETTING menu you set up
BEO4 SETTING
whether the Beo4 remote control you
are using has a navigation button or not.
Evenꢀthoughꢀyourꢀremoteꢀcontrolꢀ
hasꢀaꢀnavigationꢀbutton,ꢀyouꢀcanꢀꢀ
chooseꢀtoꢀsetꢀyourꢀtelevisionꢀupꢀ
forꢀoperationꢀwithoutꢀnavigationꢀ
button.ꢀThisꢀcanꢀbeꢀusefulꢀifꢀyouꢀ
haveꢀaꢀBeoLinkꢀsystemꢀalsoꢀ
NAVIGATION BUTTON
To make Beo4 settings …
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ
OPTIONS.ꢀ
NO NAVIGATION BUTTON
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
OPTIONSꢀmenu,ꢀandꢀhighlightꢀBEO4ꢀ
SETTING.ꢀ
For information about menu operation with
the different types of remote controls, see
comprisingꢀaꢀtelevisionꢀwithoutꢀ
theꢀBEO4ꢀSETTINGꢀmenu.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
BEO4ꢀSETTINGꢀmenu.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀ
revealꢀtheꢀsettingꢀyouꢀwant.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀ
setting.ꢀ
Ifꢀyouꢀsetꢀupꢀyourꢀtelevisionꢀforꢀ
operationꢀwithoutꢀaꢀnavigationꢀ
buttonꢀandꢀyourꢀBeo4ꢀhasꢀaꢀ
navigationꢀbutton,ꢀyouꢀmustꢀalsoꢀ
changeꢀtheꢀMODEꢀsettingꢀofꢀ
yourꢀBeo4.ꢀSeeꢀtheꢀBeo4ꢀGuideꢀ
forꢀfurtherꢀinformation.ꢀ
>ꢀPressꢀBACKꢀtoꢀbackꢀupꢀthroughꢀpreviousꢀ
menusꢀorꢀpressꢀandꢀholdꢀBACK toꢀexitꢀallꢀ
menus.ꢀ
29
Feature activation
Additionalꢀfeaturesꢀinꢀyourꢀ
televisionꢀcanꢀbeꢀmadeꢀaccessibleꢀ
viaꢀtheꢀFEATUREꢀACTIVATIONꢀ
menu.ꢀForꢀinformationꢀaboutꢀ
additionalꢀfeatures,ꢀcontactꢀyourꢀ
Bangꢀ&ꢀOlufsenꢀretailer.ꢀ
Feature activation key
In order for additional features to
become available, a feature activation
key must be entered. The feature key
can be purchased from your Bang &
Olufsen retailer. The key cannot be
deactivated again.
FEATURE ACTIVATION
KEY ....-....-....
To enter an activation key …
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀ
highlightꢀOPTIONS.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
OPTIONSꢀmenuꢀandꢀhighlightꢀFEATUREꢀ
ACTIVATION.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
FEATUREꢀACTIVATIONꢀmenu.ꢀ
>ꢀSelectꢀtheꢀfeature,ꢀyouꢀwishꢀtoꢀactivateꢀ
andꢀpressꢀtheꢀcentreꢀbutton.ꢀ
>ꢀUseꢀtheꢀnumberꢀbuttonsꢀtoꢀenterꢀtheꢀ12ꢀ
digitꢀkey.ꢀAnꢀIncorrectꢀnumberꢀcanꢀbeꢀ
deletedꢀbyꢀpressingꢀtheꢀnavigationꢀbuttonꢀ
left,ꢀallꢀnumbersꢀcanꢀbeꢀdeletedꢀbyꢀ
pressingꢀBACK.ꢀ
>ꢀWhenꢀtheꢀnumbersꢀareꢀentered,ꢀpressꢀtheꢀ
centreꢀbuttonꢀtoꢀaccept.ꢀ
30
HDMI MATRIX
TheꢀHDMIꢀMATRIXꢀfeatureꢀisꢀanꢀ
additionalꢀfeatureꢀwhichꢀcanꢀbeꢀ
purchasedꢀseparately.ꢀWhenꢀtheꢀ
purchasedꢀfeatureꢀactivationꢀkeyꢀ
isꢀentered,ꢀadditionalꢀsoftwareꢀ
becomesꢀavailableꢀinꢀyourꢀ
Important information
The HDMI MATRIX must be connected
and set up by your Bang & Olufsen
retailer.
HDMI MATRIX
MATRIX
INPUTS
IR SOCKET
IR TYPE
HDMI
YES
16
PUC1
PLUG
A
–ꢀ YourꢀBeo5ꢀremoteꢀcontrolꢀmustꢀbeꢀ
reconfiguredꢀbeforeꢀyouꢀcanꢀuseꢀtheꢀ
HDMIꢀMatrix.ꢀ
television.ꢀTheꢀHDMIꢀMatrixꢀitselfꢀ
isꢀaꢀphysicalꢀproductꢀthatꢀcanꢀbeꢀ
connectedꢀallowingꢀyouꢀtoꢀ
–ꢀ YouꢀcannotꢀoperateꢀtheꢀHDMIꢀMatrixꢀwithꢀ
aꢀBeo4ꢀremoteꢀcontrol.ꢀ
–ꢀ YouꢀcannotꢀconnectꢀmoreꢀthanꢀoneꢀHDMIꢀ
Matrixꢀinꢀaꢀsetup.ꢀ
connectꢀupꢀtoꢀ32ꢀexternalꢀ
sourcesꢀtoꢀyourꢀtelevisionꢀandꢀ
accessꢀthemꢀviaꢀtheꢀBeo5ꢀremoteꢀ
control.ꢀForꢀinformationꢀaboutꢀ
additionalꢀfeatures,ꢀcontactꢀyourꢀ
Bangꢀ&ꢀOlufsenꢀretailer.ꢀ
–ꢀ TheꢀHDMIꢀMatrixꢀcannotꢀbeꢀconfiguredꢀonꢀ Settings in the HDMI MATRIX menu …
anꢀHDMIꢀExpander.ꢀ
InꢀtheꢀHDMIꢀMATRIXꢀmenu,ꢀyouꢀcanꢀselectꢀ
settingsꢀforꢀyourꢀHDMIꢀMatrix.
In the CONNECTIONS menu …
ꢀ>ꢀOpenꢀtheꢀHDMIꢀMATRIXꢀmenu.ꢀ
>ꢀSetꢀtheꢀfieldꢀMATRIXꢀtoꢀYES.ꢀ
>ꢀSetꢀtheꢀfieldꢀINPUTSꢀtoꢀatꢀleastꢀtheꢀsameꢀ
numberꢀofꢀsourcesꢀasꢀyouꢀhaveꢀconnected.ꢀ
>ꢀSelectꢀanꢀIRꢀsocket.ꢀYouꢀcannotꢀselectꢀ
NONE.ꢀ
>ꢀSelectꢀanꢀIRꢀTYPEꢀtoꢀindicateꢀhowꢀtheꢀTVꢀ
controlꢀisꢀconnectedꢀtoꢀtheꢀHDMIꢀMatrix.ꢀ
>ꢀSelectꢀanꢀHDMIꢀsocket.ꢀYouꢀcannotꢀselectꢀ
NONE.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀ
HDMIꢀMATRIXꢀmenu.ꢀ
>ꢀAfterꢀyouꢀhaveꢀstoredꢀyourꢀsettings,ꢀselectꢀ
anꢀHDMIꢀMatrixꢀtype.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀ
settings.ꢀ
If you at a later time disable a stored HDMI
Matrix configuration by setting the HDMI
Matrix field to NO, your settings for INPUTS
are still saved. This means that if you set the
field to YES later, the settings reappear.
31
>> HDMI MATRIX
Add sources to your setup …
HDMI MATRIX
TheꢀsourcesꢀconnectedꢀtoꢀtheꢀHDMIꢀMatrixꢀ
mustꢀbeꢀregisteredꢀinꢀtheꢀtelevision.
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
INPUT 6
INPUT 7
INPUT 8
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
Configuration of inputs …
>ꢀConfigureꢀeachꢀinputꢀoneꢀbyꢀone.ꢀ
>ꢀNameꢀeachꢀinputꢀbyꢀfollowingꢀon-screenꢀ
instructions.ꢀIfꢀyouꢀdoꢀnotꢀnameꢀanꢀinput,ꢀ
theꢀnameꢀfromꢀtheꢀselectedꢀPUCꢀlistꢀisꢀ
used.ꢀ
>ꢀSelectꢀaꢀPUCꢀsourceꢀforꢀtheꢀspecificꢀinput.ꢀ
Theꢀsourcesꢀareꢀdividedꢀintoꢀfourꢀ
categories:ꢀSET-TOPꢀBOX,ꢀDVDꢀPLAYER/
RECORDER,ꢀVIDEOꢀRECORDERꢀandꢀ
OTHER.ꢀ
>ꢀWhenꢀyouꢀstoreꢀtheꢀinputꢀsettings,ꢀyouꢀ
canꢀconfigureꢀtheꢀnextꢀinput.ꢀContinueꢀ
theꢀprocedureꢀuntilꢀallꢀconnectedꢀinputsꢀ
areꢀconfigured.ꢀ
>ꢀPressꢀtheꢀgreenꢀbuttonꢀtoꢀreturnꢀtoꢀtheꢀ
CONNECTIONSꢀmenu.ꢀ
32
Teletext
Dailyꢀuseꢀofꢀteletextꢀisꢀdescribedꢀinꢀ Store favourite teletext pages
Day-to-day use of MEMO pages
GettingꢀStarted,ꢀhowever,ꢀyouꢀcanꢀ
Nine MEMO pages are available for each You may wish to refer to your teletext
alsoꢀstoreꢀfavouriteꢀteletextꢀpagesꢀ
forꢀquickꢀreference.
television channel’s teletext service.
MEMO pages quickly, for example, if
you are leaving for work and wish to
check traffic information on a teletext
service.
To create a MEMO page …
>ꢀBringꢀupꢀaꢀpageꢀyouꢀviewꢀoften.ꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ
moveꢀtheꢀcursorꢀalongꢀtheꢀmenuꢀbarꢀtoꢀ
SETUPꢀandꢀpressꢀtheꢀcentreꢀbutton.ꢀ
Theꢀ9ꢀavailableꢀMEMOꢀslotsꢀareꢀshownꢀbyꢀ
number.ꢀTheꢀfirstꢀisꢀhighlighted.ꢀ
To view MEMO pages …
>ꢀPressꢀTEXTꢀtoꢀbringꢀupꢀteletext.ꢀ
>ꢀPressꢀ ꢀorꢀ ꢀtoꢀmoveꢀbetweenꢀMEMOꢀ
pages.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀ
currentꢀpage.ꢀTheꢀcursorꢀmovesꢀtoꢀtheꢀ
nextꢀavailableꢀMEMOꢀslot.ꢀ
>ꢀPressꢀBACKꢀtoꢀleaveꢀteletext.ꢀ
To delete a MEMO page …
>ꢀUseꢀtheꢀnumberꢀbuttonsꢀonꢀBeo4ꢀtoꢀselectꢀ >ꢀUseꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ
theꢀnextꢀteletextꢀpageꢀyouꢀwishꢀtoꢀstore.ꢀ
>ꢀRepeatꢀtheꢀprocedureꢀforꢀeachꢀpageꢀyouꢀ
wishꢀtoꢀstore.ꢀ
moveꢀtheꢀcursorꢀtoꢀSETUPꢀandꢀpressꢀtheꢀ
centreꢀbuttonꢀ
>ꢀMoveꢀtheꢀcursorꢀtoꢀtheꢀMEMOꢀpageꢀyouꢀ
wishꢀtoꢀdeleteꢀandꢀpressꢀtheꢀyellowꢀ
button.ꢀ
>ꢀToꢀleaveꢀtheꢀMEMOꢀsetup,ꢀmoveꢀtheꢀ
cursorꢀtoꢀBACKꢀonꢀtheꢀteletextꢀmenuꢀbarꢀ
andꢀpressꢀtheꢀcentreꢀbutton.ꢀ
>ꢀPressꢀtheꢀyellowꢀbuttonꢀagainꢀtoꢀconfirm.ꢀ
>ꢀPressꢀBACKꢀtoꢀleaveꢀteletext.
To view teletext subtitles for a
programme …
Ifꢀyouꢀwantꢀavailableꢀteletextꢀsubtitlesꢀtoꢀ
appearꢀautomaticallyꢀforꢀaꢀparticularꢀ
programme,ꢀstoreꢀtheꢀteletextꢀsubtitlesꢀpageꢀ
asꢀMEMOꢀpageꢀ9.ꢀHowever,ꢀsubtitlesꢀareꢀnotꢀ
shownꢀwhenꢀtheꢀteletextꢀsourceꢀisꢀDVB-HD,ꢀ
norꢀwhenꢀteletextꢀisꢀshownꢀinꢀdualꢀscreen.
33
Operate other equipment with Beo4 or Beo5
Theꢀbuilt-inꢀPeripheralꢀUnitꢀ
Controllerꢀactsꢀasꢀanꢀinterpreterꢀ
betweenꢀconnectedꢀvideoꢀ
equipment,ꢀsuchꢀasꢀaꢀset-topꢀ
box,ꢀvideoꢀrecorderꢀorꢀDVDꢀ
player,ꢀandꢀyourꢀBangꢀ&ꢀOlufsenꢀ
remoteꢀcontrol.ꢀ
Use the Beo4 remote control
If you have a Beo4 remote control, some
functions are available directly via Beo4
when you switch on the equipment.
Additional functions are available
through a menu-overlay that you bring
1
2
3
4
5
GUIDE
MENU
TEXT
up on the screen. In this menu you can
see which Beo4 buttons activate specific
services or functions.
UseꢀtheꢀBangꢀ&ꢀOlufsenꢀremoteꢀ
controlꢀtoꢀgainꢀaccessꢀtoꢀtheꢀ
functionsꢀofferedꢀbyꢀyourꢀnon-
Bangꢀ&ꢀOlufsenꢀequipment.ꢀ
INFO
WIDE
Your Bang & Oufsen retailer can provide
you with a show mapping’ survey which
explains operation of the connected
equipment with Beo4 in more detail.
Example of a menu-overlay. The Beo4
buttons are shown to the right on the menu,
and the functions they control are shown to
the left. The menu may also list buttons on
Whenꢀyouꢀswitchꢀonꢀtheꢀ
equipment,ꢀtheꢀfunctionsꢀareꢀ
availableꢀviaꢀaꢀmenu-overlayꢀonꢀ
theꢀtelevisionꢀscreen,ꢀifꢀyouꢀuseꢀaꢀ
Beo4ꢀremoteꢀcontrol,ꢀorꢀviaꢀtheꢀ
Beo5ꢀdisplay.ꢀ
>ꢀPressꢀaꢀsourceꢀbutton,ꢀforꢀexampleꢀVMEM,ꢀ the remote control included with your
toꢀswitchꢀonꢀconnectedꢀequipment.ꢀ
connected equipment.
>ꢀPressꢀMENUꢀtoꢀbringꢀupꢀtheꢀmenu-overlay.ꢀ
>ꢀPressꢀtheꢀnumberꢀbuttonꢀthatꢀactivatesꢀtheꢀ Direct Beo4 operation
functionꢀyouꢀwant,ꢀorꢀpressꢀoneꢀofꢀtheꢀ
colouredꢀbuttonsꢀtoꢀactivateꢀaꢀfunction.ꢀ
If you know which Beo4 button activates
the function you want, you can activate
the function without bringing up the
menu-overlay first.
Forꢀinstructionꢀinꢀtheꢀvariousꢀ
functionsꢀofferedꢀbyꢀyourꢀ
equipment,ꢀseeꢀtheꢀproduct’sꢀ
ownꢀguide.ꢀ
The menu-overlay for equipment connected
to a main room televison cannot be displayed
on the television screen in the link room..
While your equipment is on …
>ꢀPressꢀoneꢀofꢀtheꢀcolouredꢀbuttonsꢀtoꢀ
activateꢀaꢀfunction.ꢀ
Not all connected video equipment
are supported by Bang & Olufsen. For
further information about supported
equipment, contact your Bang &
Olufsen retailer.
>ꢀPressꢀandꢀholdꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀ
upꢀtheꢀProgramꢀGuideꢀorꢀtheꢀ‘Now/Next’ꢀ
bannerꢀonꢀtheꢀscreenꢀifꢀyouꢀareꢀusingꢀ
equipmentꢀthatꢀsupportsꢀtheseꢀfunctions.
>ꢀUseꢀ ꢀandꢀ ꢀtoꢀstepꢀbetweenꢀchannels*.
>ꢀUseꢀ ꢀandꢀ ꢀtoꢀrewindꢀandꢀwindꢀin,ꢀforꢀ
example,ꢀrecordings*.ꢀ
>ꢀPressꢀMENUꢀandꢀuseꢀtheꢀnumberꢀbuttonsꢀ
toꢀactivateꢀtheꢀfunctionꢀyouꢀwant.ꢀ
*This operation does not apply to Beo4
without navigation button.
34
>> Operate other equipment with Beo4 or Beo5
Use equipment menus
Use the Beo5 remote control
Once you have activated connected
equipment, you can operate its own
menus with your remote control.
The main functions of your equipment
can be operated with the Beo5 remote
control. Not all functions may be
DTV
Sky
supported by Beo5. The available
services and functions are shown in the
Beo5 display when you activate the
equipment.
i
Interactive
Box office
TV Guide
Help
While equipment menus are shown …
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀup,ꢀdownꢀleftꢀ
andꢀrightꢀtoꢀmoveꢀinꢀmenus.
Slow
R
Services
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀselectꢀandꢀ
activateꢀaꢀfunction.
>ꢀPressꢀaꢀsourceꢀbutton,ꢀforꢀexampleꢀDTV,ꢀ
toꢀswitchꢀonꢀconnectedꢀequipment.ꢀ
>ꢀPressꢀtheꢀbuttonꢀonꢀtheꢀBeo5ꢀdisplayꢀthatꢀ
activatesꢀtheꢀfunctionꢀyouꢀwant.ꢀ
>ꢀPressꢀtheꢀnumberꢀbuttonsꢀtoꢀenterꢀ
informationꢀinꢀmenusꢀorꢀservicesꢀwhenꢀ
relevant.ꢀ
Example of a Beo5 display used to operate a
set-top box.
>ꢀUseꢀtheꢀcolouredꢀbuttonsꢀasꢀindicatedꢀinꢀ
theꢀmenusꢀofꢀyourꢀconnectedꢀequipment.
>ꢀPressꢀBACKꢀtoꢀbackꢀupꢀthroughꢀpreviousꢀ
menusꢀorꢀpressꢀandꢀholdꢀBACK toꢀexitꢀallꢀ
menus.
When you have selected connected
equipment as a source, press MENU twice
to bring up the television’s main menu.
35
Connect and operate an audio system
Ifꢀyourꢀtelevisionꢀisꢀequippedꢀ
withꢀtheꢀoptionalꢀSystemꢀModuleꢀ
andꢀyouꢀconnectꢀaꢀcompatibleꢀ
audioꢀsystem,ꢀyouꢀobtainꢀtheꢀ
benefitsꢀofꢀanꢀintegratedꢀaudio/
videoꢀsystemꢀusingꢀaꢀMasterꢀLinkꢀ
cable.
Connect your audio system to the television
Using a BeoLink cable, connect the
sockets marked MASTER LINK on the
Option 2
Option 0
television and the audio system.
Program the AV setup with Beo4
You can set your television, placed in an
AV-system, to the correct Option using
Beo4. Switch the entire system to
standby first.
PlayꢀaꢀCDꢀonꢀyourꢀaudioꢀsystemꢀ
usingꢀspeakersꢀconnectedꢀtoꢀtheꢀ
television,ꢀorꢀswitchꢀonꢀaꢀTVꢀ
programmeꢀandꢀsendꢀtheꢀsoundꢀ
toꢀyourꢀaudioꢀsystemꢀspeakers.ꢀ
If the television and an audio system is set
up in one room with all speakers connected
to the television, set the television to
Option setting for the television …
>ꢀWhileꢀholdingꢀtheꢀ•ꢀbuttonꢀ(standby)ꢀonꢀ
Beo4,ꢀpressꢀLIST.ꢀ
Option 2 and the audio system to Option 0.
Option 1
Option 1
>ꢀLetꢀgoꢀofꢀbothꢀbuttons.ꢀ
YourꢀAVꢀsystemꢀcanꢀbeꢀplacedꢀ
togetherꢀinꢀoneꢀroomꢀorꢀinꢀtwoꢀ
roomsꢀwithꢀtheꢀtelevisionꢀplacedꢀ
inꢀoneꢀroomꢀandꢀtheꢀaudioꢀ
systemꢀwithꢀaꢀsetꢀofꢀspeakersꢀ
placedꢀinꢀanother.ꢀ
>ꢀPressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ
upꢀorꢀdownꢀtoꢀbringꢀupꢀOPTION?ꢀinꢀtheꢀ
Beo4ꢀdisplayꢀandꢀpressꢀtheꢀcentre button.ꢀ
>ꢀPressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ
toꢀbringꢀup V.OPT inꢀtheꢀBeo4ꢀdisplayꢀandꢀ
thenꢀenterꢀtheꢀappropriateꢀnumberꢀ
(1,ꢀ2ꢀorꢀ4).ꢀ
If the television (with or without additional
speakers) and the audio system (with a
connected set of speakers) is set up in the
same room, set the television to Option 1
and the audio system to Option 1.
Not all Bang & Olufsen audio systems
support integration with the television.
Option setting for the audio system …
>ꢀWhileꢀholdingꢀtheꢀ•ꢀbuttonꢀ(standby)ꢀonꢀ
Beo4,ꢀpressꢀLIST.ꢀ
>ꢀLetꢀgoꢀofꢀbothꢀbuttons.ꢀ
>ꢀPressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ
upꢀorꢀdownꢀtoꢀbringꢀup OPTION?ꢀinꢀtheꢀ
Beo4ꢀdisplayꢀandꢀpressꢀtheꢀcentreꢀbutton.ꢀ
>ꢀPressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ
upꢀorꢀdownꢀtoꢀbringꢀupꢀA.OPTꢀinꢀtheꢀ
Beo4ꢀdisplayꢀandꢀenterꢀtheꢀappropriateꢀ
numberꢀ(0,ꢀ1,ꢀ2, 4, 5 or 6).ꢀ
Option 2
Option 2
If the audio system is set up in one room, and
the television (with or without additional
speakers) in another, set the television to
Option 2 and the audio system to Option 2.
36
>> Connect and operate an audio system
Program the AV setup with Beo5
If your television has been set up in an
AV system, you may need to set it to the
correct Option with Beo5. Switch the
entire system to standby first.
Option setting for the television …
>ꢀPlaceꢀyourselfꢀinꢀfrontꢀofꢀtheꢀtelevision.ꢀ
>ꢀWhileꢀholdingꢀtheꢀ•ꢀbuttonꢀ(standby),ꢀ
pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
SetupꢀmenuꢀonꢀBeo5.ꢀ
>ꢀLetꢀgoꢀofꢀbothꢀbuttons.ꢀ
>ꢀPressꢀOption PgmꢀtoꢀbringꢀupꢀtheꢀOptionꢀ
ProgrammingꢀdisplayꢀonꢀBeo5.ꢀ
>ꢀPressꢀtheꢀbuttonꢀthatꢀmatchesꢀtheꢀzoneꢀinꢀ
whichꢀtheꢀtelevisionꢀisꢀplaced,ꢀforꢀexample,ꢀ
Tv Area.ꢀ
Option setting for the audio system …
>ꢀPlaceꢀyourselfꢀinꢀfrontꢀofꢀtheꢀaudioꢀsystem.ꢀ
>ꢀWhileꢀholdingꢀtheꢀ•ꢀbuttonꢀ(standby),ꢀ
pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
SetupꢀmenuꢀonꢀBeo5.ꢀ
>ꢀLetꢀgoꢀofꢀbothꢀbuttons.ꢀ
>ꢀPressꢀOption PgmꢀtoꢀbringꢀupꢀtheꢀOptionꢀ
ProgrammingꢀdisplayꢀonꢀBeo5.ꢀ
>ꢀPressꢀtheꢀbuttonꢀthatꢀmatchesꢀtheꢀzoneꢀinꢀ
whichꢀtheꢀaudioꢀsystemꢀisꢀplaced,ꢀforꢀexample,ꢀ
Audio Area.ꢀ
37
>> Connect and operate an audio system
Use an audio/video system
If you integrate your audio system and
your television, you can choose a
speaker combination appropriate to the
current video or audio programme, and
also record video sound on the audio
system.
Zone ‘A’
TV
LIST
AV
TV
Zone ‘A’
TV
TV
LIST
AV
TV
TV
To listen to sound from a television source
on your audio system speakers without
switching on the screen, press LIST and use
the navigation button up or down to bring
up AV in the Beo4 display , then press TV.
(Beo5: Select the zone for your audio system
speakers, then press a source button, such
as TV). Beo4 instruction is shown to the
right and Beo5 instruction to the left.
To listen to sound from a television source on
your audio system speakers with the screen
switched on, press TV, press LIST and use
the navigation button up or down to bring
up AV in the Beo4 display, then press TV
again. (Beo5: Press TV, then select the zone
for your audio system speakers and press TV
again). Beo4 instruction is shown to the right
and Beo5 instruction to the left.
Zone ‘B’
CD
LIST
AV
CD
To listen to audio sound on the speakers
connected to the television, press LIST and
use the navigation button up or down to
bring up AV in the Beo4 display , then press
CD. (Beo5: Select the zone for speakers
connected to the television, and then press
an audio source button, such as CD). Beo4
instruction is shown to the right and Beo5
instruction to the left.
38
Distribute sound and picture with BeoLink
Ifꢀyourꢀtelevisionꢀisꢀequippedꢀ
withꢀtheꢀoptionalꢀSystemꢀModule,ꢀ
youꢀcanꢀconnectꢀandꢀsetꢀupꢀaꢀ
BeoLinkꢀsystemꢀtoꢀseeꢀpicturesꢀ
andꢀhearꢀsoundꢀinꢀlinkꢀrooms.ꢀ
Link connections
To the MASTER LINK socket on
the link room system
MASTER
LINK
Forꢀexample,ꢀyouꢀcanꢀconnectꢀ
yourꢀtelevisionꢀinꢀtheꢀlivingꢀroomꢀ
toꢀanotherꢀvideoꢀsystemꢀorꢀsetꢀofꢀ
speakersꢀinꢀanotherꢀroom,ꢀ
therebyꢀmakingꢀitꢀpossibleꢀtoꢀ
‘move’ꢀtheꢀpictureꢀorꢀsoundꢀtoꢀ
otherꢀrooms.ꢀ
AERIAL
RF OUT
Video signal distribution to link
rooms
RF Link
Amplifier
IfꢀyouꢀhaveꢀaꢀBeoLinkꢀdistributionꢀ
systemꢀinstalled,ꢀyouꢀcanꢀeitherꢀ
useꢀyourꢀtelevisionꢀinꢀtheꢀmainꢀ
room,ꢀsuchꢀasꢀaꢀlivingꢀroom,ꢀorꢀ
inꢀaꢀlinkꢀroom,ꢀsuchꢀasꢀaꢀstudyꢀorꢀ
bedroom.ꢀ
The main room television must be
connected to the link room system with
a Master Link cable:
If an audio system is already connected to
the Master Link socket and you wish to
connect more equipment, the Master Link
cable must be split in two and joined with
the cable from the link room using a special
junction box. Contact your Bang & Olufsen
retailer for assistance.
>ꢀConnectꢀtheꢀMasterꢀLinkꢀcableꢀtoꢀtheꢀ
socketꢀmarkedꢀMASTERꢀLINKꢀonꢀtheꢀ
television.ꢀ
Underꢀcertainꢀcircumstances,ꢀitꢀ
mayꢀbeꢀnecessaryꢀtoꢀenterꢀ
modulatorꢀsettings.ꢀ
>ꢀIfꢀyouꢀwantꢀtoꢀdistributeꢀvideoꢀsignalsꢀasꢀ
well,ꢀconnectꢀanꢀordinaryꢀaerialꢀcableꢀtoꢀ
theꢀsocketꢀmarkedꢀRFꢀOUTꢀonꢀtheꢀ
Digital signals (HDMI) cannot be distributed
from a main room television to the link room
television.ꢀThenꢀrunꢀtheꢀaerialꢀcableꢀtoꢀtheꢀ system.
RFꢀLinkꢀAmplifierꢀandꢀtheꢀMasterꢀLinkꢀ
cableꢀtoꢀtheꢀlinkꢀroom.ꢀFollowꢀtheꢀ
instructionsꢀenclosedꢀwithꢀtheꢀlinkꢀroomꢀ
equipment.ꢀ
39
>> Distribute sound and picture with BeoLink
System modulator
Link frequency
If you have an audio setup, such as a
BeoLink Active/Passive, and you choose
to set up a non-linkable television in the
same room, you must set the system
modulator to ON. The factory setting is
AUTO, which must be used if you are
using a linkable Bang & Olufsen
television.
If, for example, a TV channel in your
area is broadcasted on the same
LINK TUNING
frequency as the factory setting for the
BeoLink system; 599 MHz, you must tune
the system modulator to an unoccupied
frequency. When you change the link
frequency in the main room television,
make sure that the link frequency in the
FREQUENCY
TV SYSTEM
MODULATOR
599
B/G
AUTO
link room television corresponds to it.
The LINK TUNING menu.
To switch on the system modulator …
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ To change the link frequency …
LINK TUNING
OPTIONS.ꢀ
>ꢀBringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ
OPTIONS.
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
OPTIONSꢀmenuꢀandꢀhighlightꢀ
CONNECTIONS.
FREQUENCY
FINE TUNE
TV SYSTEM
599
0
B/G
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
OPTIONSꢀmenuꢀandꢀhighlightꢀ
CONNECTIONS.
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
CONNECTIONSꢀmenu,ꢀandꢀhighlightꢀLINKꢀ
TUNING.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
CONNECTIONSꢀmenu,ꢀandꢀhighlightꢀLINKꢀ
TUNING.ꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
LINKꢀTUNINGꢀmenuꢀandꢀhighlightꢀ
MODULATOR.
The LINK FREQUENCY menu.
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
LINKꢀTUNINGꢀmenuꢀandꢀhighlightꢀ
FREQUENCY.
When tuning in the link frequency in the link
room, a test image is shown. FINE TUNE is
only available in link room/Option 4 setups.
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ
revealꢀON.ꢀꢀ
>ꢀUseꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ
findꢀanꢀunusedꢀfrequency.ꢀꢀ
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀ
setting,ꢀorꢀ…
>ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀ
setting,ꢀorꢀ…
>ꢀ…ꢀpressꢀandꢀholdꢀBACK toꢀleaveꢀallꢀmenusꢀ
withoutꢀstoring.ꢀꢀ
>ꢀ…ꢀpressꢀandꢀholdꢀBACK toꢀleaveꢀallꢀmenusꢀ
withoutꢀstoring.ꢀꢀ
40
Your television in a link room
IfꢀyouꢀhaveꢀBeoLinkꢀinstalledꢀinꢀ
yourꢀhomeꢀandꢀyouꢀchooseꢀtoꢀ
placeꢀyourꢀtelevisionꢀinꢀaꢀlinkꢀ
room,ꢀyouꢀcanꢀoperateꢀallꢀ
connectedꢀsystemsꢀthroughꢀtheꢀ
television.
Option setting
For your entire system to function
properly, it is essential that the
Main room
Link room
television in the link room is set to the
correct Option before you connect it to
the television in the main room!
Option 6*
You must follow the procedure
described below when you connect
your television for use in a link room:
1 Connect the link room television to
the mains
With Beo4 …
>ꢀWhileꢀholdingꢀtheꢀ•ꢀbuttonꢀ(standby),ꢀ
pressꢀLISTꢀonꢀBeo4.ꢀ
>ꢀLetꢀgoꢀofꢀbothꢀbuttons.ꢀ
>ꢀPressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ
upꢀorꢀdownꢀtoꢀbringꢀupꢀOPTION?ꢀinꢀtheꢀ
Beo4ꢀdisplayꢀandꢀpressꢀtheꢀcentreꢀbutton.
>ꢀPressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ
upꢀorꢀdownꢀtoꢀbringꢀupꢀV.OPTꢀinꢀtheꢀBeo4ꢀ
displayꢀandꢀpressꢀ6*.ꢀ
*If you connect the television for use in a link
room where other link systems are already
connected, such as speakers, you must set
the television to Option 5 instead.
2 Using your remote control,
programme the link room
television to the correct Option
3 Disconnect the link room television
from the mains
4 Make the necessary connections
5 Reconnect the link room television
to the mains.
With Beo5 …
>ꢀPlaceꢀyourselfꢀinꢀfrontꢀofꢀtheꢀlinkꢀroomꢀ
television.ꢀ
>ꢀWhileꢀholdingꢀtheꢀ•ꢀbuttonꢀ(standby),ꢀ
pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ
SetupꢀmenuꢀonꢀBeo5.ꢀ
>ꢀLetꢀgoꢀofꢀbothꢀbuttons.ꢀ
>ꢀPressꢀOption PgmꢀtoꢀbringꢀupꢀtheꢀOptionꢀ
ProgrammingꢀdisplayꢀonꢀBeo5.ꢀ
>ꢀPressꢀtheꢀbuttonꢀthatꢀmatchesꢀtheꢀzoneꢀinꢀ
whichꢀtheꢀtelevisionꢀisꢀplaced.ꢀ
41
>> Your television in a link room
Link room operation
When you are in the link room, you can
operate all connected systems with the
remote control.
Listen to stereo sound in your link
room …
Main room
Link room
Usually sound distributed from a main room
video source, such as a set-top box, to the
link room is transmitted in mono. However,
you can select stereo sound:
Use sources present only in one of the
rooms …
>ꢀPressꢀtheꢀbuttonꢀforꢀtheꢀsourceꢀyouꢀwishꢀ
toꢀuse,ꢀforꢀexampleꢀRADIO.ꢀ
> PressꢀTVꢀtoꢀswitchꢀonꢀtheꢀtelevision.ꢀ
>ꢀPressꢀLIST andꢀuseꢀtheꢀnavigationꢀbuttonꢀ
upꢀorꢀdownꢀtoꢀbringꢀupꢀAVꢀinꢀtheꢀBeo4ꢀ
display.ꢀ(Beo5:ꢀPressꢀAV toꢀbringꢀupꢀaꢀ
sourceꢀdisplay).ꢀ
>ꢀOperateꢀtheꢀselectedꢀsourceꢀasꢀusual.ꢀ
Use a main room source – source type
present in both rooms …
>ꢀPressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ
upꢀorꢀdownꢀtoꢀbringꢀupꢀLINKꢀinꢀtheꢀBeo4ꢀ
display.ꢀ(Beo5:ꢀPressꢀLinkꢀtoꢀbringꢀupꢀaꢀ
sourceꢀdisplay).ꢀ
>ꢀPress,ꢀforꢀexampleꢀDTV,ꢀtoꢀactivateꢀaꢀ
sourceꢀconnectedꢀtoꢀtheꢀmainꢀroomꢀ
television,ꢀsuchꢀasꢀaꢀset-topꢀbox.ꢀ
>ꢀPressꢀtheꢀbuttonꢀforꢀtheꢀsourceꢀyouꢀwishꢀ
toꢀuse,ꢀforꢀexampleꢀTV.ꢀ
Whileꢀusingꢀthisꢀfunction,ꢀdistributionꢀofꢀ
otherꢀmainꢀroomꢀsourcesꢀtoꢀotherꢀlinkꢀroomꢀ
systemsꢀisꢀnotꢀpossible.ꢀ
>ꢀOperateꢀtheꢀsourceꢀasꢀusual.ꢀ
Use a link room source – source type
present in both rooms …
>ꢀPressꢀtheꢀbuttonꢀforꢀtheꢀsourceꢀyouꢀwishꢀ
toꢀuse,ꢀforꢀexampleꢀTV.ꢀ
>ꢀOperateꢀtheꢀsourceꢀasꢀusual.ꢀ
42
Two televisions in the same room
Ifꢀyouꢀhaveꢀplacedꢀyourꢀtelevisionꢀ
inꢀaꢀroomꢀwhereꢀyouꢀalreadyꢀ
haveꢀaꢀBangꢀ&ꢀOlufsenꢀtelevision,ꢀ
andꢀcommandsꢀfromꢀyourꢀ
remoteꢀcontrolꢀcanꢀbeꢀreceivedꢀ
byꢀbothꢀtelevisions,ꢀyouꢀmustꢀ
changeꢀtheꢀOptionꢀsettingꢀofꢀtheꢀ
television.ꢀThisꢀpreventsꢀ
One remote control for both televisions
For your television to function properly,
it is essential that the television is set to
information on Option programming. If
you have a Beo4, you must set your
television to Option 4, and if you have a
Beo5, you must set the television to the
correct zone*.
BeoVision 8
Option 4
LIST
LINK
TV
simultaneousꢀactivationꢀofꢀbothꢀ
televisions.ꢀ
When you Option program the
television, disconnect the television
you do not want to program from
the mains. This ensures that only the
television, you want to program,
receives the Option programming.
Beo4 – Operate your television in
Option 4 …
TV
Normally, you can activate a source, such
as TV, simply by pressing the relevant
source button on your remote control.
However, when you set your television
to Option 4, you must do the following,
if you have a Beo4:
Beo4 operation.
BeoVision 8
Zone ‘A’
>ꢀPressꢀLIST*ꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ
upꢀorꢀdownꢀtoꢀbringꢀupꢀLINKꢀinꢀtheꢀBeo4ꢀ
display.ꢀ
Zone ‘A’
TV
>ꢀPressꢀaꢀsourceꢀbutton,ꢀsuchꢀasꢀTV.ꢀ
BeoVision 8
Zone ‘B’
*In order to display LINK on Beo4, you must
first add it to the Beo4 list of functions. See
the Guide enclosed with your Beo4.
Zone ‘B’
TV
Beo5 operation.
*NOTE! For information about choice of zone,
contact your Bang & Olufsen retailer.
43
|