Specifications
Nominal Diameter
Nominal Impedance
Minumum Impedance
Power Handling
(300-3000 Hz)
170 mm. (6.5 in.)
8 Ω
5.8 Ω
Nominal1
120 W
240 W
98 dB
Continuous Program2
Sensitivity (1W/1m)3
Frequency Range
Voice Coil Diameter
Winding Material
Former Material
Winding Depth
150-8000 Hz
38 mm. (1.5 in.)
Aluminium
Fiber Glass
7 mm. (9/32 in.)
6 mm. (1/4 in.)
1.4 T
Magnetic Gap Depth
Flux Density
4
Thiele & Small Parameters
Fs
117 Hz.
5.2 Ω
0.48
3
Re
Qes
Qms
Qts
Vas
Sd
η0
0.42
5 dm.3 (0.17 cu. ft.)
132 cm.2 (20.5 sq. in.)
1.6 %
0.6 mm.
9 gr.
8.5 Tm
0.6 mH
X max
Mms
Bl
Le
6 PE 13 | Midrange
Mounting and Shipping Informations
High efficiency midrange, recommended
in such application as multi-way systems
from 600 Hz. to 5 kHz.
Overall Diameter
187 mm. (7.4 in.)
172 mm. (6.7 in.)
145 mm. (5.7 in.)
78 mm. (3.1 in.)
11 mm. (7/16 in.)
2.3 Kg. (5.1 lb.)
10.5 Kg (23.1 lb.)
405x225x210 mm
(15.9x8.8x8.3 in.)
Bolt Circle Diameter
Baffle Cutout Diameter
Depth
Flange and Gasket Thickness
Net Weight (1 unit)
Shipping Weight (4 units)
Shipping Box (4 units)
1 2 hours test made with continuous pink noise signal (6 dB crest factor). Power
calculated on rated minimum impedance. Loudspeaker in free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 200 to 8000 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave precon-
ditioning test.
1
|