Specifications
Nominal Diameter
Nominal Impedance
Minumum Impedance
Power Handling
380 mm (15 in)
8 Ω
6.2 Ω
(50 –500 Hz)
Nominall
400 W
800 W
99 dB
Continuous Program2
Sensitivity (1W/1m)3
Frequency Range
Voice Coil Diameter
Winding Material
Former Material
50-2000 Hz
76 mm (3 in)
Copper
Glass Fibre
16 mm (5/8 in)
9 mm (11/32 in)
1.1 T
Winding Depth
Magnetic Gap Depth
Flux Density
Also available in 4 Ω, data upon request
4
Thiele & Small Parameters
Fs
Re
47 Hz
5.1 Ω
Qes
Qms
Qts
Vas
0.33
5.1
0.31
140 dm3 (4.9 ft3)
Sd
855 cm2 (132.5 in2)
4.2%
η0
X max
X var
Mms
Bl
4 mm
6 mm
84 g
15 PK 40 | Woofer
19.7 T·m
2.3 mH
Le
High efficiency 15" woofer with a very flat frequency
response up to 2 kHz and high power handling (800W). Good
LF performance, smooth voice response, and compatibility
with compact bass-reflex enclosures, the 15 PK 40 achieves
perfect balance in two-way systems.
Mounting and Shipping Information
Overall Diameter
Bolt Circle Diameter
Baffle Cutout Diameter
Depth
394 mm (15.5 in)
374 mm (14.6 in)
355 mm (13.9 in)
162 mm (6.4 in)
16 mm (5/8 in)
8.3 kg (18.3 lb)
9.6 kg (21.1 lb)
450x450x200 mm
(17.7x17.7x8 in)
Flange and Gasket Thickness
Net Weight
Shipping Weight
Shipping Box
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2000Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave precon-
ditioning test.
|