Ayre C-5xeMP
Owner’s Manual
Universal Stereo Player
Table of
Contents
Welcome to
Ayre . . . . . . . . . . . . . . . . . . . . . . . 2
Introduction . . . . . . . . . . . . . . . . . . . 3
Installation . . . . . . . . . . . . . . . . . . . . 4
Operation. . . . . . . . . . . . . . . . . . . . . 7
Discs . . . . . . . . . . . . . . . . . . . . . . 19
Customization. . . . . . . . . . . . . . . . . . 28
Specifications . . . . . . . . . . . . . . . . . . 32
Warranty . . . . . . . . . . . . . . . . . . . . 33
Notes . . . . . . . . . . . . . . . . . . . . . . 36
Overview and
Connections and
Controls and
Navigation of
Optimization and
Numbers and
Statement of
A Place for
Welcome to
Ayre
Your Ayre C-5xeMP offers a significant advance in
the musical performance of high-fidelity equipment.
The warmth and immediacy of a live performance
are apparent from the first listening. The
combination of superb resolution and a natural,
relaxed quality will draw you into the music, time
and time again.
This level of performance has been implemented
using the highest level of workmanship and
materials. You can be assured that the Ayre C-5xeMP
will provide you a lifetime of musical enjoyment.
To our North American customers, please be
sure to mail your warranty registration card and
photocopy of your original sales receipt within 30
days in order to extend the warranty to five
years.
2
Overview and
Introduction
To provide the highest possible
level of audio performance,
there is no video circuitry in
The Ayre C-5xeMP is a universal stereo player. It
plays all currently available audio disc formats,
including CD, SACD, DVD-Audio, DVD-Video
the C-5xeMP
.
(soundtrack only), and MP3.
The C-5xeMP offers both stereo analog and PCM
digital outputs. Multi-channel discs may also be
played. In the case of multi-channel SACDs, the
C-5xeMP will automatically select the two-channel
area that is included on virtually all multi-channel
SACDs. In the case of multi-channel tracks that may
be present on DVD-Audio or DVD-Video discs, the
C-5xeMP will automatically down-mix to stereo.
For the foreseeable future CD
will continue to be the
dominant format, with a wide
variety of titles available in
all musical genres.
Thanks to its advanced technological features, the
C-5xeMP will extract the full measure of performance
from all digital audio formats, including CD,
maximizing your musical enjoyment, both now and
into the future.
3
Connections and
Installation
The Ayre C-5xeMP universal stereo player is easy to
connect and use. The following guidelines will
ensure that the installation goes smoothly.
Location
The infrared beam of the
remote control will also travel
through glass.
A good location for your player is at an easily
accessible height in an open-backed cabinet or on a
shelf. The receiver for the infrared remote control is
mounted behind the display lens on the front panel.
A direct line of sight from the listening position
will ensure the maximum range.
Analog Outputs
For best sound quality, it is
not normally recommended to
use both sets of analog outputs
simultaneously.
The Ayre C-5xeMP offers both balanced and
unbalanced outputs. Balanced connections are made
via three-pin XLR connectors, while unbalanced
connections are made via RCA connectors.
When you have a choice, a balanced connection
will offer slightly higher sound quality than an
unbalanced connection.
4
Digital Output
The Ayre C-5xeMP features a balanced AES/EBU
digital audio output on the rear of the unit. This
output is used when connecting to a digital
recording unit or other device, such as an external
digital-to-analog converter (DAC). Additional
information regarding the digital output may be
found in the chapter “Optimization and
Customization”.
An adapter is available from Ayre should you
need to connect the digital output to an S/PDIF
input that uses an RCA connector.
Control Port
The control port on the rear panel of the C-5xeMP
allows the unit to communicate with a system
controller such as a Crestron or AMX. Additional
information regarding the control port may be
found in the chapter “Optimization and
Customization”.
5
AC Power
The Ayre C-5xeMP may be plugged directly into an
unswitched wall outlet. Although proprietary RFI
(radio-frequency interference) filtering is built into
the disc player, in some situations an AC power-line
filter (such as those offered by Ayre) may provide
additional sonic benefits.
Break-In
Playing music with the unit
for 100 to 500 hours will
ensure full break-in.
Due to the manufacturing processes used for the
printed circuit boards, wires, and capacitors, a
break-in period is necessary for the Ayre C-5xeMP to
reach its full performance potential.
6
Controls and
Operation
The Ayre C-5xeMP universal stereo player may be
controlled using either the front panel buttons or
the included remote control. Basic functions are
available at both locations, while additional
functions are available only at the remote control.
Remote Control
The supplied remote control handset has a solid
aluminum housing and features lighted keys for easy
use in a dark environment. This dual-function
handset is able to control a complete Ayre playback
system. The buttons above the Ayre logo are used to
operate your C-5xeMP, while the buttons below the
logo will operate an Ayre preamplifier or integrated
amplifier.
The remote control handset uses 4 x AAA batteries,
which are pre-installed at the factory. When battery
replacement is required, remove the black plastic
end-cap at the bottom of the unit by removing the
two screws. The battery holder will easily slide out
so that the batteries may be replaced.
7
1 – 4x
Lights when playing a track with 176.4 or 192 kHz sample
rate.
2 – 2x
3 – 1x
Lights when playing a track with 88.2 or 96 kHz sample rate.
Lights when playing a track with 44.1 or 48 kHz sample rate.
Lights when playing an SACD.
4 – SACD
5 – DTS
Lights when playing a DTS soundtrack.
Lights when playing a Dolby Digital soundtrack.
Lights when a disc is playing.
6 – Dolby Digital
7 – Play
8 – Pause
Lights when a disc is paused.
9 – Character Display
10 – Display Off
11 – Remain
12 – Chp
Displays disc information.
Lights when the display is turned off.
Indicates that the display is showing the time remaining.
Indicates that the display is showing a DVD-V chapter
number.
13 – Trk
Indicates that the display is showing a CD, SACD, or DVD-A
track number.
14 – Title
15 – Grp
Indicates that the display is showing a DVD-V title number.
Indicates that the display is showing a DVD-A group number.
Lights when playing a DVD with video content.
16 – V-Part
8
Basic Functions
The following basic functions are accessible via both
the front panel buttons and the remote control
handset.
Standby/Operate
The “Standby/Operate” button toggles the unit
between normal operation and standby mode. When
in standby mode a green status LED in the front
panel is illuminated, and the critical internal
circuitry remains powered. This ensures optimal
performance with a minimum of warm-up time.
Open/Close
The “Open/Close” button opens and closes the disc
tray. An open tray may also be closed by pressing
gently on the front edge of the tray.
When the tray is closed, almost all DVD-Video
discs will automatically begin playing. This is
because the DVD format allows the disc to send
commands to the player.
9
Play
The “Play” button initiates playback of the disc. If
the drawer is open, pressing “Play” will also close
the drawer.
Pause
The “Pause” button will pause the disc playback.
Playback may be resumed either by pressing the
“Pause” button again or the “Play” button.
Stop
The “Stop” button will stop disc playback. However
if you are playing a DVD-Video disc, the display
shows “RESUME” and the position is memorized.
Press “Play” to start from the memorized position,
or press “Stop” a second time to clear the memorized
position.
The resume position remains memorized as long
as the DVD-Video disc is in the player, even if you
switch the power off.
Previous
While the disc is playing, the “Previous” button
will back up to the start of the current track (CD,
SACD, DVD-A) or chapter (DVD-V). Additional
presses will move to previous tracks or chapters.
10
The “Previous” button on both the front panel
and the remote handset can activate two separate
functions, depending on how long the button is
pressed. A quick button press (less than about ½
second) will activate the “Previous” function. A
longer button press (greater than about ½
second) will activate the “Reverse Scan” function.
The behavior of the “Previous” function varies
depending on the type of disc being played.
With a CD or SACD, pressing the “Previous”
button will navigate through the tracks, whether
the disc is playing or stopped.
Pressing the “Previous” button while a DVD is
playing will navigate through the tracks (DVD-A)
or chapters (DVD-V). However when a DVD is
stopped, pressing the “Previous” button will instead
navigate through the available groups (DVD-A) or
titles (DVD-V). Please refer to the chapter
“Navigation of Discs” for additional information.
Next
The “Next” button will move to the start of the next
track (CD, SACD, DVD-A) or chapter (DVD-V).
Additional presses will move to subsequent tracks or
chapters.
The “Next” button on both the front panel and
the remote handset can activate two separate
functions, depending on how long the button is
pressed. A quick button press (less than about ½
second) will activate the “Next” function. A
longer button press (greater than about ½
second) will activate the “Forward Scan” function.
11
The behavior of the “Next” function varies
depending on the type of disc being played.
With a CD or SACD, pressing the “Next” button
will navigate through the tracks, whether the disc is
playing or stopped.
Pressing the “Next” button while a DVD is playing
will navigate through the tracks (DVD-A) or
chapters (DVD-V). However when a DVD is
stopped, pressing the “Next” button will instead
navigate through the available groups (DVD-A) or
titles (DVD-V). Please refer to the chapter
“Navigation of Discs” for additional information.
Reverse Scan
The “Reverse Scan” mode scans backward through
the disc.
The “Previous” button on both the front panel
and the remote handset can activate two separate
functions, depending on how long the button is
pressed. A quick button press (less than about ½
second) will activate the “Previous” function. A
longer button press (greater than about ½
second) will activate the “Reverse Scan” function.
The behavior of the front panel “Reverse Scan”
function is slightly different than the remote
control “Reverse Scan” function.
Pressing and holding the front panel “Previous”
button will engage the “Reverse Scan” function. The
unit will scan backward as long as the button is
held. When the button is released, the disc will
resume normal play.
12
After activating the “Reverse Scan” function with a
longer button press of the remote control handset’s
“Previous” button, the unit will automatically
continue scanning backward until the “Play”
button is pressed. Press “Play” when the desired
location has been reached.
Subsequent presses of the remote control
handset’s “Reverse Scan” function while the unit
is scanning backward will toggle between the
normal scan rate and a high-speed scan rate.
Forward Scan
The “Forward Scan” mode scans forward through the
disc.
The “Next” button on both the front panel and
the remote handset can activate two separate
functions, depending on how long the button is
pressed. A quick button press (less than about ½
second) will activate the “Next” function. A
longer button press (greater than about ½
second) will activate the “Forward Scan” function.
The behavior of the front panel “Forward Scan”
function is slightly different than the remote
control “Forward Scan” function.
Pressing and holding the front panel “Next” button
will engage the “Forward Scan” function. The unit
will scan forward as long as the button is held.
When the button is released, the disc will resume
normal play.
13
After activating the “Forward Scan” function with a
longer button press of the remote control handset’s
“Next” button, the unit will automatically
continue scanning forward until the “Play” button
is pressed. Press “Play” when the desired location
has been reached.
Subsequent presses of the remote control
handset’s “Forward Scan” function while the unit
is scanning forward will toggle between the
normal scan rate and a high-speed scan rate.
Additional Functions
The following functions are available only via the
remote control handset.
Number Keys
The number keys allow quick navigation to a
desired point on the disc.
To enter a number greater than “9”, simply press
the desired number keys in order. For example,
to enter “23”, first press “2” and then “3”.
Please note that the behavior of the number keys
varies depending on the type of disc being played.
When playing a CD or SACD, pressing the number
keys for the desired track number will navigate to
that track, whether the disc is playing or stopped.
Pressing the number keys while a DVD is playing
will navigate through the tracks (DVD-A) or
chapters (DVD-V). However when a DVD is
14
stopped, pressing the number keys will instead
navigate through the available groups (DVD-A) or
titles (DVD-V). Please refer to the chapter
“Navigation of Discs” for additional information.
Display Brightness
The front panel display of the C-5xeMP has three
brightness settings, plus an “Off” position.
The “Display” button of the remote control
handset can activate two separate functions,
depending on how long the button is pressed. A
quick button press (less than about ½ second) will
activate the “Display Brightness” function. A
longer button press (greater than about ½
second) will activate the “Display Mode” function.
Briefly pressing the “Display” button on the remote
control handset will activate the “Display
Brightness” function, scrolling through the four
choices. A blue LED next to the display illuminates
when the display is turned off.
When the display is off, pressing any key will
illuminate the display for a few seconds. If the disc
is playing when the display is off, pressing “Play”
will briefly illuminate the display without affecting
playback.
Display Mode
Various information regarding the disc being played
may be selected for the front panel display by using
the “Display Mode” function.
15
The “Display” button of the remote control
handset can activate two separate functions,
depending on how long the button is pressed. A
quick button press (less than about ½ second) will
activate the “Display Brightness” function. A
longer button press (greater than about ½
second) will activate the “Display Mode” function.
The information available for display varies
according to the type of disc being played.
Activating the “Display Mode” function with a
longer button press will scroll through the available
choices for each type of disc:
CD and SACD
DVD-Audio
DVD-Video
MP3
Track number + Elapsed track time
Track number + Remaining track time
“DISC” + Total remaining time on the disc
Group number + Track number + Elapsed track time
Group number + Track number + Remaining track time
“# GRP” + Total remaining time in the current group
Title number + Chapter number + Elapsed time in title
“# TTL” + Total remaining time in the current title
Title number + Chapter number + Remaining chapter time
Track number + Elapsed time
Track name
Folder name
Repeat
When playing MP3 discs,
repeat folder mode is also
available.
Pressing the “Repeat” button selects between
normal play mode, repeat track (chapter for DVD-V
discs) mode, and repeat disc (group for DVD-A discs
or title for DVD-V discs) mode.
16
The status of the “Repeat” mode is shown on the
front panel display when the default display mode is
selected.
To exit the “Repeat” mode, either press the
“Repeat” button to scroll through the modes or
press the “Stop” button.
Audio
The “Audio” function is only
available on DVD-V and
some DVD-A discs.
The “Audio” function allows the selection of the
various soundtracks available on most DVD-Video
discs and some DVD-Audio discs.
Pressing the “Audio”button will enter the mode
whereby the soundtrack may be selected. The “GUI”
symbol will illuminate on the front panel display for
five seconds, and additional presses of the “Audio”
button during this period will scroll through the
available soundtracks. Please refer to the chapter
“Navigation of Discs” for additional information.
Random
The “Random” function is not
available when playing
SACDs.
Pressing the “Random” button will play the tracks
in random order, except with SACDs. The status of
the “Random” mode is shown on the front panel
display.
To exit the “Random” mode, either press the
“Stop” button or manually select a new track
with the number keys of the remote control
handset.
During random play, the “Previous” and “Next”
buttons function somewhat differently than normal.
17
Pressing “Previous” returns to the beginning of the
current track (chapter for DVD-V discs). You
cannot go back further than this. Pressing “Next”
selects a track (chapter for DVD-V discs) at random
from those remaining.
Remote Control Handset Illumination
The buttons of the remote control handset include a
backlight for easier use in a darkened room. The
backlight is turned on for three seconds by pressing
the “Illumination” button, easily located by feel in
the bottom center of the keypad. Additional key
presses (of any key) will extend the illumination
time for three seconds after the key is released.
18
Navigation of
Discs
The Ayre C-5xeMP universal stereo player will play
every currently available audio disc format. Each
type of music disc has a structure to aid in
navigation, that is, locating and playing the desired
music on each disc. While there is an overall
similarity, each disc format utilizes a different
navigational structure. Understanding the
underlying navigational structure of each type of
discs will allow for greater ease of use.
CD
The navigational structure of a CD is so intuitive
that we often take it for granted. The music on each
disc is broken up into numbered tracks. For popular
music each track typically contains one song. For
classical music each track typically contains either
one shorter composition or one movement of a
longer composition. Navigation of a CD is simple
and straightforward.
19
SACD
SACDs use a system of numbered tracks for
navigation, just as CDs do. In addition, an SACD
will provide distinct areas when multi-channel
tracks are present in addition to the normal stereo
tracks. Each audio format (multi-channel or stereo)
is contained is its own separate area.
The Ayre C-5xeMP will always play the stereo
area of an SACD, ignoring any multi-channel areas
that may be present.
A very few discs have only a multi-channel area.
In this case the C-5xeMP will play the stereo CD
layer that is always present on these hybrid discs.
All SACDs may therefore be easily navigated in the
same way as a standard CD.
DVD-Audio
The DVD-Audio format is extremely flexible and
allows for a wide variety of audio formats, including
both stereo and multi-channel, each with a
multiplicity of available sample rates and
resolutions. This increased flexibility necessarily
leads to an increased complexity of disc navigation.
DVD-Audio Disc Structure
On a DVD-A disc each separate audio format is
usually contained in its own group, and each group is
divided into numbered tracks. For example, a disc
20
may have one group with a stereo mix sampled at
192 kHz with a resolution of 24 bits, while a second
group may have a multi-channel (surround sound)
mix sampled at 96 kHz with a resolution of 24 bits.
Typically there are several different groups on a
DVD-A disc. Normally each group contains the
same number of tracks, each with the same musical
selections, although presented in various formats.
There may also be a menu group intended for
navigation when using a video display. These menu
groups are of little use with the Ayre C-5xe, as it
does not include any video circuitry.
However, some DVD-A discs are organized so that
multiple audio formats are stored as separate
soundtracks within a group. The “Audio” button on
the remote control handset will allow the desired
soundtrack to be selected.
When this type of DVD-A disc is playing, the first
press of the “Audio” button will enter the mode
whereby the soundtrack may be selected. The “GUI”
symbol will illuminate on the front panel display for
five seconds, and additional presses of the “Audio”
button during this period will scroll through the
available soundtracks.
In an additional level of complexity, the groups are
contained in a title set. Only DVD-Audio players can
access the Audio Title Set, but nearly all
DVD-Audio discs also contain a Video Title Set for
backwards compatibility with DVD-Video players.
The Ayre C-5xeMP will only access the Audio Title
Set, ignoring any content in the Video Title Set.
21
DVD-Audio Navigation
Pressing “Play” while the
DVD-A disc is stopped will
automatically begin play at
Track 1 of Group 1.
Many DVD-A discs were designed to be played
while using a video display for navigation of the
on-screen menu. Nonetheless, advanced features
built into the Ayre C-5xeMP allow for easy
navigation of DVD-A discs without the use of a
video display.
The C-5xeMP will play all formats found on DVD-A
discs, including PCM, Dolby Digital, and DTS.
Multi-channel tracks will automatically be
down-mixed to stereo. Therefore, all groups (and
soundtracks) will play properly.
The key to navigating DVD-A discs is to recognize
that only one group (or soundtrack) on each disc
has the highest sound quality.
When playing a DVD-A disc for the first time, you
will want to determine which group (or soundtrack)
has the highest sound quality. While the disc is
stopped, use the navigation keys (“Next”,
“Previous”, and number keys) to navigate to each
group on the disc.
Remember that while the disc is stopped, the
navigation keys (“Next”, “Previous”, and number
keys) will select which group will play, but while
the disc is playing the navigation keys will select
which track in the current group will play.
If the disc has only one group, or if none of the
groups has high-resolution audio tracks, then the
various formats are stored in different
soundtracks, usually in Group 1. Use the “Audio”
button on the remote control handset to access
the various soundtracks in each group.
22
Using the indicator LEDs on the front panel of the
C-5xeMP, note which group (or soundtrack) uses the
highest sample rate and does not use compressed
(Dolby Digital or DTS) audio.
Make a note of the group (or soundtrack) with
the highest sound quality on the case of the
DVD-A disc. The next time you wish to play that
disc, you may navigate to that group directly using
the navigation buttons (“Next”, “Previous”, and
number keys) or the “Audio” button.
Once the desired group (or soundtrack) has been
selected and the disc is playing, the tracks on the
disc may be navigated in the normal way. Use either
the “Next” and “Previous” functions or direct track
access via the number keys of the remote control
handset.
Due to variations in the way DVD-A discs are
authored, some discs may not allow for direct
track access via the number keys. This is not a
malfunction of the player. Use the “Next” and
“Previous” functions to navigate these discs.
DVD-Video
DVD-Video discs typically contain a film or musical
concert that is one to two hours in length. The main
program is contained in a single title, which is
sub-divided into chapters for easier navigation.
Additional titles may also be present, containing
other features such as interviews with the directors,
on-screen menus, et cetera.
23
The main feature is almost always found in Title 1,
and this is the title that would normally be played
when using the C-5xeMP. Virtually all DVD-V discs
will auto-play upon insertion. However, many discs
will begin playing a menu that is designed to be
navigated by using a video display. In this case the
front panel display shows “MENU”. Simply press
“Stop” and then use the navigation functions
(”Next”, “Previous”, or the number keys) to access
the desired title (normally Title 1) and begin play.
Many discs use UOPs (User Operation Prohibitions)
to prevent the player from executing the “Stop”
command while the FBI warning is playing.
If the disc does not stop immediately after
pressing the “Stop” button, simply wait a few
moments until the FBI warning has finished
playing. Then press “Stop” again.
Once play begins in the desired title, the chapters
may be navigated either with the “Next” and
“Previous” functions or with the number keys on the
remote control handset.
Most DVD-Video discs contain multiple
soundtracks. These may be in the form of various
spoken languages or various audio formats (e.g.,
Dolby Digital, DTS, or PCM). The “Audio” button
on the remote control handset will allow the desired
soundtrack to be selected.
While a DVD-Video disc is playing, the first
activation of the “Audio” function will enter the
mode whereby the soundtrack may be selected. The
“GUI” symbol will illuminate on the front panel
24
display for five seconds, and additional presses of the
“Audio” button during this period will scroll
through the available soundtracks.
MP3
CD-ROM discs containing MP3 files are divided
into folders (directories) and tracks. Folders may also
contain further sub-folders. In addition, each folder
and track may be given a name when the disc is
created on a personal computer (PC).
MP3 Navigation
The system of tracks and folders creates a
hierarchical structure for navigation. When playing
an MP3 disc, play will begin with the tracks in the
root directory. When all of those tracks have been
played, play will continue with the tracks contained
in the first folder, and so forth, until all tracks in all
folders have been played.
Within any given folder, the individual tracks may
be accessed either with the “Next” and “Previous”
functions or with the number keys of the remote
control handset. To navigate to the next folder, press
the “Next” button while playing the last track in
the current folder. To navigate to the previous
folder, press the “Previous” button twice while
playing the first track in the current folder. (The
first button press will return to the start of the
current track and the second button press will back
up to the last track in the previous folder.)
25
When selecting an MP3 track for play, the front
panel display will show the following information in
sequence:
1.5 seconds
3 seconds
“MP3” + folder number + track number.
Track name (first eight characters).
Track number + elapsed time.
Remainder of track
Most of the time there will be no indication of
which folder is currently playing. To display this
information, use a longer button press on the
“Display” key of the remote control handset to
activate the “Display Mode” function. See the
chapter “Controls and Operation” for additional
information.
Creating MP3 Discs
You can create your own MP3 discs for playback on
the Ayre C-5xeMP by using a personal computer.
Please keep in mind the following points when
creating an MP3 disc:
• This unit will play compressed audio files in
MP3 format with a 44.1 or 48 kHz sample rate.
• This player only plays tracks that are named
with the file extension “.mp3”.
• Variable bit-rate files are playable, but the
playing time may not be shown correctly.
• Use CD-R or CD-RW media for recording your
MP3 files.
26
• This player is compatible with multi-session
discs, but will only play sessions that are closed.
• This player can recognize a maximum of 250
folders or 250 tracks.
27
Optimization and
Customization
The Ayre C-5xeMP is configured at the factory to
provide the best performance for a typical
installation. In certain situations you may wish to
change the default configuration for optimal
performance in your system, using small toggle
switches on the rear of the unit.
The default configuration settings (all switches in
the “up” position) will work best for the vast
majority of users.
Digital Audio Output
An adapter is available from
Ayre should you need to
connect the digital output to a
device with an S/PDIF input
that uses an RCA connector.
The Ayre C-5xeMP features a balanced AES/EBU
digital audio output on the rear of the unit. This
may be used when connecting to a digital recording
unit or other device, such as an external
digital-to-analog converter (DAC).
The digital audio output is only active with PCM
or compressed PCM (Dolby Digital or DTS)
based discs (CD and DVD). It is inactive when
playing SACDs.
28
A switch on the rear panel allows the digital audio
output to be turned off if its use is not required.
Turning the digital output “off” when not using it
will result in slightly higher sound quality through
the analog outputs.
A second switch sets the sample rate available at the
digital output. Selecting “44/48 kHz” will
down-sample high sample rate (88.2, 96, 176.4, or
192 kHz) PCM discs to single rate (44.1 or 48 kHz)
PCM output.
Only change the sample rate switch while the unit
is powered on and no disc is playing.
If the unit is not powered on or if a disc is playing,
the position of the switch will not be detected. This
can lead to a mismatch between the position of the
switch and the actual state of the unit.
Selecting “88/96 kHz”will allow high sample rate
PCM discs to output dual-rate PCM (88.2 or 96
kHz) at the digital audio output. This higher
quality format can be used with a device capable of
accepting higher sample rates. Dual-rate discs will
output dual-rate audio, while quad-rate (176.4 or
192 kHz) DVD-Audio discs will be downsampled
to dual-rate audio.
29
Digital Filter
The digital filter of the Ayre C-5xeMP features two
user-selectable algorithms. A selector switch is
located on the rear panel. One algorithm produces
greater accuracy in the time domain and is labeled
“Listen”. The other algorithm produces greater
accuracy in the frequency domain and is labeled
“Measure”.
Normally the selector switch is set to the “Listen”
position when listening to music. However some
listeners may prefer the additional high-frequency
energy provided by the “Measure” position.
This switch only affects the analog outputs, and not
the digital audio output.
Control Port
The control port on the rear panel of the C-5xeMP
allows the unit to communicate with a system
controller such as a Crestron or AMX. The control
port uses opto-isolators to ensure that there are no
unwanted ground loops created when using a system
controller.
Pre-terminated cables, command files, and
detailed information regarding the control port
are available upon request from the Ayre factory.
There are two separate functions performed by the
control port; reception of commands and
transmission of the current power status (”Operate”
or “Standby”) information.
30
Command Functions
The C-5xeMP may either be controlled by the remote
control handset via a receiver on the front panel or
by a system controller via the control port. A small
toggle switch on the rear panel selects which mode
is active.
For normal use, set this switch to “IR Receiver”.
Set the switch to “Control Port” only when using
a custom programmed system controller.
Command files are available from the Ayre factory
in both Crestron and Pronto (CCF) format. These
files include discrete on/off commands.
Power Status Information
The control port will also transmit the current
power status (”Operate” or “Standby”) of the
C-5xeMP information to a system controller. This
feedback ensures that system controller remains
synchronized with the actual state of the unit.
31
Numbers and
Specifications
Maximum Output Level
(PCM)
4.10 V rms – balanced outputs
2.05 V rms – single-ended outputs
Maximum Output Level
(DSD)
2.00 V rms – balanced outputs
1.00 V rms – single-ended outputs
Analog XLR Output Polarity
Pin 1 = Ground
Pin 2 = Non-inverting (Positive)
Pin 3 = Inverting (Negative)
Frequency Response
DC - 20 kHz (44.1 kHz sample rate)
DC - 22 kHz (48 kHz sample rate)
DC - 40 kHz (88.2 kHz sample rate)
DC - 44 kHz (96 kHz sample rate)
DC - 80 kHz (176.4 kHz sample rate)
DC - 88 kHz (192 kHz sample rate)
DC - 100 kHz (2.8224 MHz sample rate)
Power Consumption
Dimensions
60 watts maximum
17-¼" W x 13" D x 4-¾" H
44 cm x 33 cm x 12 cm
Weight
26 pounds
12 kg
32
Statement of
Warranty
North American Warranty
Your Ayre C-5xeMP universal stereo player is
warranted against defects in workmanship and
materials for a period of ninety days from the date of
original purchase. This ninety-day coverage is
automatic upon acceptance of delivery and no
registration is required.
Additionally you have the option, at no cost, to
extend the warranty for a period of five years from
the date of purchase (except for the disc transport
mechanism, which will be warrantied for a period of
two years from the date of purchase) by returning
the completed Warranty Registration Card and a
photocopy of your original purchase receipt in the
enclosed postage-paid envelope to Ayre within
thirty days of product delivery. This optional
warranty is only available within the thirty-day
registration period.
33
North American Warranty Statement
1. If any defects are found in the materials or
workmanship of this Ayre product within the
warranty period, the unit will be repaired or
replaced by Ayre Acoustics, Inc. (Ayre) or its
authorized agent.
2. Purchaser must return the product, packed in the
original shipping carton, freight prepaid to:
Ayre Acoustics, Inc.
2300-B Central Avenue
Boulder, Colorado 80301
or to Ayre’s authorized agent. The product must be
accompanied by a written description of the defect
and a photocopy of your original purchase receipt.
Ayre will not be responsible for any shipping
damage and strongly recommends the purchase of
shipping insurance.
3. Ayre reserves the right to inspect any product
that is the subject of any warranty claim prior to
repairing or replacing it. Final determination of
warranty coverage lies solely with Ayre.
Out-of-warranty claims will be billed for labor,
materials, return freight, and insurance as required.
Any product for which a warranty claim is accepted
will be returned to the purchaser and the cost of
shipping and insurance will be factory prepaid
within the boundaries of the USA. Units to be
shipped outside of the USA will be shipped freight
collect only.
34
4. Ayre strives to manufacture the finest possible
equipment, and therefore reserves the right to make
improvements on its products, without necessarily
assuming any obligation to retrofit such changes
upon its previously manufactured models.
5. The above warranty is the sole warranty given by
Ayre, and is in lieu of all other warranties. All
implied warranties, including warranties of
merchantability or fitness for any particular purpose
shall be strictly limited to the duration of the above
warranty. Ayre shall have no further obligation of
any kind, whether express or implied. Further, Ayre
shall in no event be obligated for any incidental or
consequential damages as a result of any defect or
any warranty claim, whether express or implied.
6. Ayre does not authorize any third party,
including any dealer or sales representative, to
assume any liability of Ayre or make any warranty
for Ayre. The unit must not have been altered or
improperly serviced. The serial number on the unit
must not have been altered or removed.
7. This warranty is transferable to subsequent
purchasers within the original warranty period.
International Warranty
Warranty terms outside of North America may vary.
Please contact the authorized Ayre distributor in
your country of purchase for the terms of warranty
and also the service itself.
35
A Place for
Notes
Serial Number:
________________________________________
Purchase Date:
Dealer:
________________________________________
________________________________________
________________________________________
Salesperson:
36
Rev. 2.0
|