vehicle guide
XMC-10A
Important: This manual contains important safety and operating information. Please read, understand, and
follow the instructions in this manual. Failure to do so could result in personal injury, death, and/or damage
to your Xpress accessories, and/or to your vehicle or property
3
Congratulations
Thank you for purchasing the Audiovox Xpress XM® Satellite Radio 2nd Vehicle
Kit. You are one step closer to experiencing the latest innovation in XM
Satellite Radio. XM Satellite Radio will revolutionize your vehicle or
in-home entertainment.
XM is America’s number one satellite radio service with more than 7 million
subscribers. Broadcasting live daily from studios in Washington, DC, New York
City, the Country Music Hall of Fame in Nashville, Toronto and Montreal, XM’s
2006 lineup includes more than 170 digital channels of choice from coast to
coast: the most commercial-free music channels, sports, talk, comedy, children’s
and entertainment programming; and the most advanced traffic and weather
information.
XM the leader in satellite-delivered entertainment and data services for the
automobile market through partnerships with General Motors, Honda, Toyota,
Hyundai, Nissan, Subaru, Suzuki and Porsche, is available in more than 140
different vehicle models for 2006. XM’s industry-leading products are available
at consumer electronics retailers nationwide. For more information about XM
Required subscription for service sold separately. Premium Channels available at
additional monthly costs. Installation costs and other fees and taxes may apply,
including a one-time activation fee. All fees and programming subject to change.
College sports games subject to availability. Subscriptions subject to Customer
Agreement included with the XM Welcome Kit and available at
©2006 XM® Satellite Radio Inc. XM is
a
trademark of XM Satellite
Radio. All rights reserved. All other trademarks are the property of their
respective owners.
4
FCC Information
Please note that the power cable that has been supplied with your device is supplied
with permanently attached ferrite beads at each end. It is the responsibility of the user to
use the cable with the ferrite beads.
The user is cautioned that changes or modifications not expressly approved by XM®
Satellite Radio Inc. can void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the installation instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the antenna of the affected receiver.
- Increase the separation between the XM equipment and the affected receiver.
- Connect the XM equipment into an outlet on a circuit different from that to which
the affected receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: The FCC and FAA have not certified XM Satellite Radio Receivers for use in
any aircraft (neither portable nor permanent installation). Therefore, XM Satellite
Radio, Inc. cannot support this type of application or installation.
5
Cautions and Warnings
1. Do not install the XMC10A vehicle cradle in a position that hinders
your view through the windshield, or obstructs viewing of the
dashboard indicators and displays.
2. Do not install the unit where it may obstruct the operation or
deployment of safety devices, such as airbags, etc.
3. Do not allow operation of the unit to detract from safe driving
practices; remember that you are responsible as the vehicle
operator to adhere to all safe driving and traffic regulations.
4. By adhering to these warnings and safety considerations,serious
accidents and/or personal injury can be avoided.
6
Contents XMC10A
Install Manual
Swivel Bracket 1 pc.
Antenna 1 pc.
Cassette Adapter 1pc.
12 Volt-to-5 Volt DC Power
Adapter 1 pc.
See XM SureConnect
Vehicle installation
Cradle XMC10A 1 pc.
XM SureConnect Kit 1 pc.
7
Contents XMC10A (Cont)
ACCESSORY KIT
Alcohol Cleaning Pad,
Surface Cleaning Pad,
Instruction Sheet,
Antenna Cable Exit Plug
OPTIONAL(sold separately)
AudioCable
(P/NSAT-RCA)
FM Direct Adapter
(P/N XMFM-1)
8
Installation/Wiring Precautions
1. To prevent a short-circuit, be sure to turn off the ignition and remove
the negative (-) battery cable prior to installation. Connect power
wires last.
2. Do not install the unit in locations exposed to direct sunlight or, in
areas subject to extreme temperatures.
3. Incorrect installation may cause damage to the system. Mount
the unit firmly in place, using the supplied hardware.
4. Be careful not to damage the vehicle wiring.
5. Be sure to use the supplied screws and washers.
6. Be careful not to snag any wires when tightening screws.
7. Use only the 12 Volt-to-5 Volt DC Power Adapter supplied. Use of an
alternative power adapter may damage the Xpress XM receiver and/
or the XMC10A cradle.
CAUTION: You could drain the vehicle battery if the DC power
adapter remains plugged in after the ignition is turned
off. Unplug the adapter to prevent this possibility.
9
Setting Up and Installing Your Kit
NOTE: The XM signal can be received and processed virtually
anywhere as long as there are no obvious satellite signal
obstructions such as nearby buildings, high terrain, parking
garages ortunnels.
1. Cabling Interconnections
You can begin to enjoy XM Satellite Radio as soon as the Xpress
XM Receiver and Vehicle Kit installation are complete. Set up your
Audiovox Xpress XM System using the following installation
instructions, or enlist the help of a professional installer:
2. Installing the Cradle Mount Base Assembly
a. Interconnect all of the components as shown on the adjacent
page to verify that the system operates normally.
b. Locate a firm, reasonably flat surface within your car to permit
optimum viewing and line-of-sight access by the supplied remote
control unit.
10
Interconnect Diagram
NOTE:
XMC10A CRADLE
(LEFT SIDE VIEW)
1. IF THE XMC10A IS INSTALLED
USING THE OPTIONAL XMFM-1 FM
DIRECT ADAPTER, DO NOT
CONNECT AN AUDIO CABLE TO THE
AUDIO OUT CONNECTOR OF THE
CRADLE.
2. THE FM MODULATOR OPTION
MUST BE SET TO ”FM ON” IN THE
XPRESS XM USER MENU. (REFER TO
THE USER GUIDE)
AUX AUDIO INPUT TO AUDIO OUTPUT
OF EXTERNAL PLAYBACK DEVICE. THIS
PERMITS AUDIO FROM AN EXTERNAL
DEVICE SUCH AS A PORTABLE CD
PLAYER OR MP3 PLAYER TO BE
PLAYED THROUGH THE XPRESS XM FM
MODULATOR .
+12V to +5V
DC POWER
ADAPTER
TO VEHICLE
+12 VDC POWER
RECEPTACLE
OR
CLA FEMALE SOCKET WIRES
TO VEHICLE +12 VDC POWER
RECEPTACLE (OPTION WITH
XMFM1 KIT)
11
Interconnect Diagram (Cont)
XMC10A CRADLE
(REAR VIEW)
XM ANTENNA
XMC10A CRADLE
(RIGHT SIDE VIEW)
TO VEHICLE RADIO
ANTENNA JACK
OPTIONAL SAT-RCA
AUDIO CABLE
(SOLD SEPARATELY)
OPTIONAL FM DIRECT
ADAPTER XMFM-1 (SOLD
SEPARATELY)
(CONNECT TO AUXILIARY
AUDIO INPUTS ON
VEHICLE HEAD UNIT.)
12
CAUTION: Do not install the swivel bracket on a leather or
fabric surface, or in a position that could impair your
vision, block air bag(s) or obstruct vehicle dashboard
controls and/or radio CD/cassette operational
displays.
NOTE: The adhesive backing on the bracket will not permit
easy repositioning once it has been mated to the
surface; use extreme care and planning when selecting
the mounting location. If the bracket is to be screwed
to the surface, make sure the area in back of the
mounting surface is clear of wires or other items to
prevent unintentional damage.
c. Using the alcohol swab supplied with your kit, clean the
mounting surface and thoroughly wipe the area dry with a clean
lint-free cloth.
d. If the outside air temperature is cold, it may be beneficial to
warm the adhesive backing on the bracket using a portable hair
dryer, or by holding the backing surface in front of a vehicle
heater vent.
13
e. Remove the plastic liner from the adhesive backing on the
bracket, and fix the base in position on the surface; make sure
the mounting pad is accurately positioned on the first try, since
repositioning may be difficult, if not impossible.
f.
If the bracket is to be screwed in place, do not remove the
plastic liner from the adhesive backing. Use appropriate sheet
metal or machine screws for this purpose.
g. To mount the XMC10A cradle atop the swivel bracket, line up
the slot at the rear of the cradle with the bracket retainer tab,
and slide the cradle down so that the slot and tab mesh together
in a locked position.
NOTE: Allow a 72-hour period for the adhesive backing to cure
completely.
14
SIDE (HORIZONTAL)
MOUNTING
CONFIGURATION
VERTICAL MOUNTING
CONFIGURATION
SWIVEL
ADJUSTMENT
SCREW
XMC10A
CRADLE
ASSEMBLY
PLASTIC LINER AND
ADHESIVE BACKING
SWIVEL
BRACKET
SCREW HOLES (2)
FOR DIRECT HARD
MOUNTING
15
3. Using Other Manufacturer’s Mounts
The XMC10A Cradle can also be installed using other manufacturer’s
mounts; the mounting plate provisions on the rear and bottom of the
cradle provide you with two mounting options within the vehicle using
various vehicle-specific aftermarket brackets.
4. Installing the Xpress XM Receiver into the Cradle
Install the Receiver as follows:
a. After making sure the connectors and guide pin hole are properly
lined up, gently lower the Xpress XM Receiver into the cradle
and press down on the Xpress XM Receiver to mate the
connectors together. The raised detent on the cradle will enter
the notch on the rear of the Receiver, indicating the Xpress XM
is properly seated.
b. The Xpress XM Receiver should now be secured in the
cradle
16
RECEIVER
NOTCH
Xpress XM
RECEIVER
SYSTEM
CONNECTOR
Xpress XM
RECEIVER
REAR VIEW
RAISED
DETENT
CRADLE
FRONT VIEW
CONNECTOR
GUIDEPIN
XMC10A
SYSTEM
CONNECTOR
17
5. Connection Options
The Xpress Receiver and Cradle provide an audio output signal
in three ways:
a. FM Modulator - When using the XMC10A cradle with the FM
modulator option, the XM audio signal can be received through
your vehicle’s radio on selectable FM frequencies using the
menu option included in your Xpress Receiver. (Refer to the
User Guide.) The XM audio signal can then be played through
your vehicle’s radio when that radio is tuned to one of the
available frequencies.
NOTE: To minimize radiated interference from the XM
equipment (antenna and receiver), it will be necessary to
incorporate the XM SureConnect Vehicle Installation
instructions provided in the XMC10A.
b. FM Direct Wiring - If the FM modulator does not provide
satisfactory performance in your vehicle, use the optional FM
Direct Adapter, Part # XMFM-1, which provides a hard wired FM
output.
c. Low-Level Audio Output - For vehicles equipped with radio head
units with auxiliary audio inputs, the audio signal can be routed
through an optional audio cable (Part No. SAT-RCA) and applied
to the auxiliary inputs of a radio or entertainment system. In this
case, it is best to turn the Xpress Receiver FM modulator option
off to avoid interference.
18
d. Xpress Cassette Adapter -The XM Xpress Cassette Adapter
offers an additional audio connection option by utilizing your
existing vehicle’s in-dash cassette deck.
XM research and lab test results show that using a vehicle cassette
adapter can best maximize the relationship between the best sound
quality and ease of installation (see chart below).
XMC10A CRADLE
(RIGHT SIDE VIEW)
TO VEHICLE
RADIO ANTENNA
JACK
OPTIONAL SAT-RCA
AUDIO CABLE
(SOLD SEPARATELY)
(CONNECT TO
AUXILIARY AUDIO
INPUTSON VEHICLE
HEAD UNIT.)
OPTIONAL FM DIRECT
ADAPTER XMFM-1
(SOLD SEPARATELY)
19
Xpress Cassette Adapter Installation.
Installation is simple.
1.) Plug the end jack (1) into the XM Xpress Car Cradle’s
audio output (2).
2.) Insert the cassette adapter (3) in the vehicle’s in-dash
cassette slot (4).
4
3
2
1
20
6. Installation Guidelines
Step 1.
First, determine the proper location for your XM satellite radio
antenna based on the following criteria for your specific vehicle:
a.You must locate the satellite radio antenna on the top of the
roof either in front of the rear window (option 1) or behind the
windshield (option 2). The satellite radio antenna will perform
best if magnetically attached to a steel surface with an
unobstructed view of the open sky and minimum of 3 to 6
inches of metal surrounding the antenna.
OPTION
1
OPTION
2
KEEP EXCESS CABLE
UNDER OR BEHIND
THE DASHBOARD
b. When routing the antenna cable along the windshield or rear
window, tuck the antenna cable under the window seal to
maintain a professional looking installation and to avoid
loose wires on the exterior of the vehicle which are
susceptible to damage. Follow the interior cable routing
diagram depicted by dashed lines in the illustration above
where possible.
21
c. Avoid kinking, crimping, twisting or chafing the cable. Use
pre-existing wire channels when possible.
d. For option 1 and rear mounting locations, route the cable into
the trunk as shown in the previous illustration. Always cross
the weather seal at the lowest part of the trunk to reduce water
leaks. From the trunk, route the cable into the passenger
compartment through available wire channels and then along
the floor under the door jam trim or under the carpet to the
front of the passenger compartment. Do not leave the cable
loose in the passenger compartment where it is likely to be
damaged.
e. For option 2 and front mounting locations, route the cable
along the door jam and into the vehicle as shown. Route the
cable across the weather seal near the bottom of the door to
reduce water leaks.
22
Step 2.
Once you have plugged the power
and antenna jacks into the vehicle
cradle, secure the cables with tape
or wire ties to allow for a clean
appearance.For example, secure
the excess cable up under your
dash board, between the seat and
the console, or on the floor under a
seat or floor mat. This will help to
prevent the excess cable from
interfering with the everyday use of
your vehicle, improve the
appearance of the installation, and
avoid any undesirable accidental
damage to the cables that might
result in loss of power or satellite
signal.
Be sure to choose a location carefully by taking notice of how
doors and trunks open and close, as well as how seats move
when they are adjusted so you can be certain there is ample
clearance provided for the cables.
23
NOTES
24
12MONTHLIMITEDWARRANTY
AUDIOVOX ELECTRONICS CORPORATION (the Company) warrants to
the original retail purchaser of this product that should this product or any
part thereof, under normal use and conditions, be proven defective in
material or workmanship within 12 months from the date of original
purchase, such defect(s) will be repaired or replaced with new or
reconditioned product (at the Company's option) without charge for parts
and repair labor.
To obtain repair or replacement within the terms of this Warranty, the
product is to be delivered with proof of warranty coverage (e.g. dated bill
of sale), specification of defect(s), transportation prepaid, to an approved
warranty station or the Company at the address shown below.
This Warranty does not extend to the elimination of externally generated
static or noise, to costs incurred for installation, removal or reinstallation
of the product, damage to speakers, accessories, or vehicle and home
electrical systems, malfunction of satellite transmissions, repeater signal
or receiver unit.
This Warranty does not apply to any product or part thereof which, in the
opinion of the Company, has suffered or been damaged through
alteration, improper installation, mishandling, misuse, neglect, accident,
or by removal or defacement of the factory serial number/bar code label(s).
25
THEEXTENTOFTHECOMPANY'SLIABILITYUNDERTHISWARRANTY
IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE
AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE
PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF
THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD
OF 48 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO
CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUEN-
TIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY
OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No
person or representative is authorized to assume for the Company any
liability other than expressed herein in connection with the sale of this
product.
Some states do not allow limitations on how long an implied warranty
lasts or the exclusion or limitation of incidental or consequential damage
so the above limitations or exclusions may not apply to you. This
Warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
U.S.A.: AUDIOVOXELECTRONICSCORPORATION,150MARCUSBLVD.,
HAUPPAUGE, NEW YORK 11788 (1-800-645-4994)
128-7351
Audiovox Electronics Corporation
150 Marcus Blvd.
Hauppauge, New York 11788
U.S.A.
1 800 645 4994
Printed on Recycled Paper
©2006 Audiovox Electronics Corporation. All rights reserved.
XM name and related logos are trademarks of XM Satellite Radio Inc.
XMC-10A
128-7472H
|