4x1DVI Switcher with
Stereo Audio
AT-DVI-41A
User Manual
Toll free: 1-877-536-3976
Local: 1-408-962-0515
INTRODUCTION
The Atlona AT-DVI-41A is 4 inputs and 1 output DVI Switcher with Stereo Audio. The switcher is designed to route up
to 4 x DVI sources with Audio to a single display. The DVI-41A is capable of passing extremely high resolutions up to
1920x1200 or 1080p. Each input is featured with a built-in repeater which will help to keep the signal quality the same
as it was originally.
The DVI switcher is fully HDCP compliant, therefore could be used along with HDMI sources, DVI/HDMI adapters or cables
will be required.
The Atlona 4x1 DVI Switcher could be controlled though IR remote, RS232 port or manually via buttons selection on the
front panel of the switch.
Note: For applications where customer would need the computer to sense a monitor at all the time even when switcher is switched
to a different computer, we recommend to use our EDID Recorder, AT-DVISync. User would require 1 x DVISync per computer.
FEATURES
• The Atlona AT-DVI-41A is designed to switch up to 4 x computers to 1 x monitor.
• Switcher is featured with 4 x Stereo audio inputs and 1 x Output
• Switcher is able to support high resolutions up to 1920x1200 (WUXGA) or 1080p (1920x1080)
• AT-DVI-41A is fully HDCP compliant and therefore can also work with HDMI sources (DVI/HDMI adapters will be
required)
• High Bandwidth Support up to 6.75Gbps allows high motion video and high resolutions to be passed though
without any delay or degradation
• Support wide range of Computer resolutions from VGA to WUXGA (640x480 ~ 1920x1200)
• HDTV resolutions: 480i/480p, 576i/576p, 720p, 1080i & 1080p (50/60Hz)
• Switcher is compatible with all DVI enabled computers and monitors (DVI output has to be digital only)
• Support Digital Video TMDS formats in Deep Color up to 36bits
• IR input jack, allows users to extend IR signal up to 1000ft from the switch
• Various control Options: IR, RS232 and Manual Push Button on the front panel
• Rack Mountable, comes with a set of rack ears – 1U
PACKAGE CONTENT
• 1 x AT-DVI-41A (4x1 DVI Switch with Stereo Audio)
• 1 x Manual
• 1 x IR Remote Control
• 19 inch Rack Ears - 1U
• IR Extender allows user to connect an IR extension cable to the switcher and control the switch from up to 1000ft
away.
• RS232 Cable
• Power Supply 12VDC, Universal Type 50/60Hz, 100~230 VAC
Toll free: 1-877-536-3976
Local: 1-408-962-0515
2
SPECIFICATIONS
Type of a Switcher
DVI Input
4 input to 1 output DVI with Stereo Audio Switch
DVI-I (Digital Only)
Stereo Audio Input
Resolution support
HDCP
1/8-inch (3.5mm)
up to 1920x1200 or 1080p
Compliant
EDID
Compliant
Input Signals
Video (TMDS) 0.5~1.0Vpp, DDC 5Vpp
24/30/36-bits
Various video input RGB/YCBCR
interface supporting
digital video stand-
ards
YCBCR
8/10/12/16/20/24-bits
Double data rate interface 12/15/18-bits
for RGB/YCBCR
Various control Options
Data Rates
IR, RS232 and Manual Push Button on the front panel
250Mbps to 6.75Gbps
Infrared frequency
Safety Approvals
Dimensions (LWH)
Power Supply
38 KHz
CE, FCC, RoHs (2002/95/EC)
19”x 7.87” x 1.75”(482mm x 200mm x 44mm) – 1U
DC12V / 1.25A (110~240V)
5.80 lb
Shipping Weight
PANEL DESCRIPTIONS
1. Front Panel
1
2
3
4
5
6
1. POWER ON SWITCH. The power switch turns the unit ON and OFF. The LED will illuminate red to indicate that the
switcher is ON.
2. INPUT SOURCES STATUS LED’s. Input sources 1 though 4 LED will illuminate blue to indicate that a Digital source is
present on that input.
3. SOURCES SELECT BUTTONS. 4 x buttons for selecting desired DVI input
4. IR SENSOR. The IR sensor receives IR commands from the IR remote control.
5. OUTPUT STATUS WITH LED DISPLAY. Output Status via LED to reveal 1~4 input sources.
6. 19 INCH EAR MOUNT PAIR. 19 –inch Rack Ears - 1U
Toll free: 1-877-536-3976
Local: 1-408-962-0515
3
2. Rear Panel
5
4
3
2
1
1. DC POWER INPUT
12V/1.25A, center positive power input. Please ensure that plug is always securely connected to the switcher. Atlona
only approves a use of the included power supply, if user needs to use a different power supply, Atlona has to pro-
vide an official approval, and otherwise the warranty will be VOID.
Power Jack:
DC Jack - inner OD O 2.1mm (+)
Outside OD O 5.5mm (GND)
Power input - 12VDC, 1.25A
2. IR EXTENDER CONTROL
IR input, allows user to connect an IR cable up to 1000ft to be able to control the unit from far away.
IR Extender Jack:
Female Jack - inner OD 3.5 mm (1/8-inch)
3. RS 232 CONNECTION
RS 232 control port allows users to control AT-DVI-41A though a 3rd party control system or though the computer
directly. Port Specifications: DB-9pin Female connector
4. INPUTS - 1 ~ 4 DVI and Stereo Audio
Connect up to 4 x DVI with Stereo Audio Sources. DVI inputs are (DVI-I); however will only take Digital Signal. Stereo
Audio inputs are 1/8-inch (3.5mm)
5. OUTPUTS - 1 x DVI and Stereo Audio
Connect 1 x DVI with Stereo Audio Display. DVI output is (DVI-I); however will only take Digital Signal.
Stereo Audio output is 1/8-inch (3.5mm)
Toll free: 1-877-536-3976
Local: 1-408-962-0515
4
REMOTE CONTROL
1
2
1. SWITCH POWER ON or OFF
2. PORT 1 ~ 4 INPUT SOURCES SELECTION
# 1 - INPUT-1 Select input 1 source with selection button
# 2 - INPUT-2 Select input 2 source with selection button
# 3 - INPUT-3 Select input 3 source with selection button
# 4 - INPUT-4 Select input 4 source with selection button
IR EXTENDER
1. IR Extender Connection
Toll free: 1-877-536-3976
Local: 1-408-962-0515
5
2. IR Extender Package
RS232
1. RS-232 Serial Interface
RS-232 serial interface allows connecting a control system or a computer to it for controlling the switcher
Pin
1
RS-232
Definition
Not used
Transmitter
Receiver
-
1
5
2
Tx
3
Rx
4
-
Not used
Ground
6
9
5
GND
6
-
-
-
-
Not used
Not used
Not used
Not used
7
8
9
Toll free: 1-877-536-3976
Local: 1-408-962-0515
6
2. RS232
The Atlona switcher is featured with RS232 control port which allows users to control the switch though a control system
or from the computer.
The serial communication parameters are 9600 baud rate, 8 bit, No Parity and 1 stop bit
When the unit recognizes a complete command it will perform the requested action - there is no delimiter character
required.
Note: The unit does not send out a feedback message when a value is changed from the front panel or by IR control. If the switcher
needs to be controlled though front panel in addition to the RS232 control, user should regularly verify the unit’s status to ensure
the control system accurately reflects the current settings.
3. Protocol Commands
To Switch Inputs to Outputs
SBI0XO0Y - Where X is Output Number (1-1) and Y is Input Number (1-4)
Unit will respond with
SBUD0XOY - Where X is Output Number (1-1) and Y is Input Number (1-4)
Example: Send Input 4 to Output 1
SBI04O01 – Sending Command
SBUD04O1 – would be the feedback command which switcher will send back to the control system to confirm
the input change
4. RS-232 Serial Commands
Power OFF command - SBSYSMOF
Power ON command - SBSYSMON
Unit will respond with:
Unit is in Standby - SBALOFAK
Unit is no longer in Standby - SBALONAK
Example: Put Unit in Standby (Soft Power) SBSYSMOF
Switchers will feedback with SBALOFAK
5. Front Panel Lock
Note: Hard resetting the unit will unlock the Front Panel controls.
Lock Front Panel: SBSYSMLK – When locked, changes can only be made via RS232
Unlock front panel: SBSYSMUK
Unit will respond with: SBSYSLOK - Front Panel has been locked
SBSYSULK - Front Panel has been Unlocked
SBALLRST - Reset every output to Input 1
Unit will respond with SBRSTACK
Toll free: 1-877-536-3976
Local: 1-408-962-0515
7
SAFETY INFORMATION
Safeguards
To reduce the risk of electric shock, do not
expose this product to rain or moisture
Do not modify the wall plug. Doing so will
void the warranty and safety features.
If the wall plug does not fit into your local
power socket, hire an electrician to replace
your obsolete socket.
This equipment should be installed near
the socket outlet and the device should
be easily accessible in the case it requires
disconnection.
Precautions
FCC regulations state that any unauthorized changes or modifications to this equipment, not expressly ap-
proved by the manufacturer, could void the user’s authority to operate this equipment.
Operate this product using only the included external power supply. Use of other power supplies could impair
performance, damage the product, or cause fires.
In the event of an electrostatic discharge this device may automatically turn off. If this occurs, unplug the device
and plug it back in.
Protect and route power cords so they will not be stepped on or pinched by anything placed on or against
them. Be especially careful of plug-ins or cord exit points from this product.
Avoid excessive humidity, sudden temperature changes or temperature extremes.
Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements, fish tanks, and
swimming pools.
Use only accessories recommended by Atlona to avoid fire, shock, or other hazards.
Unplug the product before cleaning. Use a damp cloth for cleaning and not cleaning fluid or aerosols.
Such products could enter the unit and cause damage, fire, or electric shock. Some substances may also mar
the finish of the product.
Never open, remove unit panels, or make any adjustments not described in this manual. Attempting to do so
could expose you to dangerous electrical shock or other hazards. It may also cause damage to your AT-DVI-41A
Opening the product will void the warranty.
Do not attempt to service the unit. Disconnect the product and contact your authorized Atlona reseller or con-
tact Atlona directly.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
8
WARRANTY
Limited Warranty
Atlona Technologies warrants that (a) its products (the AT-PRO2HD88M) will perform substantially in accor-
dance with the accompanying written materials for a period of 3 years from the date of receipt and (b) that
the product will be free from defects in materials and workmanship under normal use and service for a period
of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited
to 3 years from the date of receipt. Some jurisdictions do not allow such limitations on duration of an implied
warranty, so the above limitation may not apply to customers that fall within those areas.
Customer Remedies
Atlona Technologies’ and its suppliers’ entire liability and Customer’s exclusive remedy shall be, at Atlona Tech-
nologies’ decision, either return of the price paid for the product, repair, or replacement of the product that
does not meet this Limited Warranty and which is returned to Atlona Technologies with a copy of the Cus-
tomer’s receipt. This Limited Warranty is void if failure of the product has resulted from accident, abuse, misap-
plication, or natural occurrence. In example but not limited to: power surges (electrical storms, local power out-
age), dropping the product (or items on the product), contact with fluids, and physical misconduct (i.e. kicking
or punching). Any replacement product will be warranted for the remainder of the original warranty period.
No other warranties
To the maximum extent permitted by applicable law, Atlona Technologies and its suppliers disclaim all other
warranties, either expressed or implied, including, but not limited to, implied warranties of merchantability
and fitness for a particular purpose, with regard to the product and any related written materials. This Limited
Warranty gives customer specific legal rights. Customers may have other rights depending on the jurisdiction.
No liability for damages
To the maximum extent permitted by applicable law, in no event shall Atlona Technologies or its suppliers be
liable for any damages arising out of the use of or inability to use this product, even if Atlona Technologies has
been advised of the possibility of such damages. Such damages include but are not limited to: special, inciden-
tal, consequential, or indirect damages for personal injury, loss of business profits, business interruption, loss
of business information, or any other pecuniary loss.
Atlona Technologies’ and its suppliers’ entire liability under any provision of this agreement shall be limited to
the amount actually paid by you for the product. Some Jurisdictions do not allow the exclusion or limitation
of liability for consequential or incidental damage. The above limitations may not apply to you in such jurisdic-
tional cases.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
9
ATLONA PRODUCT REGISTRATION
Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few
moments to register your new purchase.
Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll
receive notification of performance issues and firmware updates.
At Atlona, we respect and protect your privacy, assuring you that your registration information
is completely secure. Atlona product registration is completely voluntary and failure to register will not
diminish your limited warranty rights.
To register go to: http://www.atlona.com/registration
Toll free: 1-877-536-3976
10
Local: 1-408-962-0515
|