VN248 Series
LCD Monitor
User Guide
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
As an Energy Star® Partner, our company has determined
that this product meets the Energy Star® guidelines for energy
efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iii
Safety information
•
•
•
•
•
Before setting up the monitor, carefully read all the documentation that
came with the package.
To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
•
•
Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
•
•
•
Use the appropriate power plug which complies with your local power
standard.
Do not overload power strips and extension cords. Overloading can
result in fire or electric shock.
Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
•
Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
•
•
Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100 ~ 240V AC.
•
•
The socket-outlet shall be installed near the equipment and shall be
easily accessible
If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.
iv
Care & Cleaning
•
Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
•
•
Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
•
The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
•
•
You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
•
When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
v
Where to find more information
Refer to the following sources for additional information and for product
and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
vi
1.1
Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper,
broader, and brighter display, plus a host of features that enhance your
viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings you!
1.2
Package contents
Check your package for the following items:
LCD Monitor
Monitor Base
Quick Start Guide
Warranty Card
1x Power Cord
1x VGA Cable
1x Audio Cable
1x HDMI Cable (option)
1x HDMI to DVI cable (option)
1x MHL Cable (option)
•
If any of the above items is damaged or missing, contact your retailer
immediately.
ASUS LCD Monitor VN248 Series
1-1
1.3
Assembling the monitor base
1. Attach the base to the arm.
2. Beware to align the latch to the notch on the base.
3. The end of the arm will slightly protrude from the base. No need to
push it in.
4. Screw the base to the arm tightly.
3
2
1
4
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
1.4
Connect cables
•
Flip upward the IO port cover to connect cables. After connected cables,
replace the cover and carefully push it upward to its original position with both
thumbs at both sides of the cover.
1-2
Chapter 1: Product Introduction
1.5
Monitor introduction
1.5.1
Front of the LCD monitor
1
2
4
5
6
7
3
1.
2.
QuickFit Button:
•
•
This is a hotkey to activate the QuickFit function designed for alignment.
The QuickFit function contains 7 pages of common grid patterns, paper
Button:
•
•
Automatically adjust the image to its optimized position, clock, and phase
by long pressing this button for 2-4 seconds (for VGA mode only).
Use this hotkey to switch from six video preset modes (Scenery,
Standard, Theater, Game, Night View, and sRGB Mode) with
SPLENDID™ Video Intelligence Technology.
•
Exit the OSD menu or go back to the previous menu as the OSD menu is
active.
3.
Button:
•
•
Press this button to decrease the value of the function selected or move
to the next function.
This is also a hotkey for Volume adjustment.
ASUS LCD Monitor VN248 Series
1-3
4. MENU Button:
•
•
Press this button to enter the OSD menu.
Press this button to enter/select the icon (function) highlighted while the
OSD is activated.
•
Press this button over five seconds to enable or disable the key lock
function.
5.
Button:
•
•
Press this button to increase the value of the function selected or move to
the previous functions.
This is also a hotkey for Brightness adjustment.
Input Select Button:
6.
7.
•
Use this hotkey to switch from VGA, HDMI / MHL-1 or HDMI / MHL-2
input signal.
Power Button/Power Indicator:
•
•
Press this button to turn the monitor on/off.
The color definition of the power indicator is as the below table.
Status
White
Amber
OFF
Description
ON
Standby mode
OFF
1-4
Chapter 1: Product Introduction
1.5.3
QuickFit Function
The QuickFit function contains three patterns: (1) Grid (2) Paper size (3)
Photo size.
1. Grid pattern: Facilitates designers and users to organize content and
layout on one page and achieve a consistent look and feel.
Alignment Grid
EXIT
2. Paper size: Provides users to view their documents in real size on the
screen.
Letter
A4
Letter
EXIT
EXIT
3. Photo size: Provides photographers and other users to accurately
view and edit their photos in real size on the screen.
2x2
8x10
4x6
3x5
5x7
EXIT
EXIT
1-6
Chapter 1: Product Introduction
2.1
Detaching the arm/stand (for VESA wall
mount)
The detachable stand of this monitor is specially designed for VESA wall
mount.
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Use your fingers to loosen the screw located at the bottom of the
base, and remove the base from the stand.
3. Or you may directly use a screwdriver to remove the screws that
secure the stand to the monitor, and detach the stand from the
monitor.
•
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Hold the stand while removing the screws.
1
2
3
•
•
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
Use only the UL Listed Wall Mount Bracket with minimum weight/load 22.7kg
(Screw size: M4 x 10 mm).
ASUS LCD Monitor VN248 Series
2-1
2.2
Adjusting the monitor
•
For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
•
•
Hold the stand to prevent the monitor from falling while changing its
angle.
You can adjust the monitor’s angle from -5˚ to 20˚.
-5 ~ 20
2-2
Chapter 2: Setup
3.1
OSD (On-Screen Display) menu
3.1.1
How to reconfigure
VN248
Splendid
Color
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Image
Input Select
System Setup
Night View Mode
sRGB
Reading Mode
Darkroom Mode
Move
Menu
Exit
1. Press the MENU button to activate the OSD menu.
2. Press and to navigate through the functions. Highlight and
activate the desired function by pressing the MENU button. If the
function selected has a sub-menu, press and again to navigate
through the sub-menu functions. Highlight and activate the desired
sub-menu function by pressing the MENU button.
3. Press and to change the settings of the selected function.
4. To exit the OSD menu, press the
step 3 to adjust any other function.
button. Repeat step 2 and
3.1.2
OSD Function Introduction
1. Splendid
This function contains eight-functions that you can select for your
preference. Each mode has the Reset selection, allowing you to
maintain your setting or return to the preset mode.
VN248
Splendid
Color
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Image
Input Select
System Setup
Night View Mode
sRGB
Reading Mode
Darkroom Mode
Move
Menu
Exit
•
Scenery Mode: This is the best choice for scenery photo displaying with
SPLENDID™ Video Intelligence Technology.
ASUS LCD Monitor VN248 Series
3-1
•
•
•
•
Standard Mode: This is the best choice for document editing with
SPLENDID™ Video Intelligence Technology.
Theater Mode: This is the best choice for movie watching with
SPLENDID™ Video Intelligence Technology.
Game Mode: This is the best choice for game playing with SPLENDID™
Video Intelligence Technology.
Night View Mode: This is the best choice for playing dark-scene game
or watching dark-scene movie with SPLENDID™ Video Intelligence
Technology.
•
•
•
sRGB Mode: This is the best choice for viewing photos and graphics
from PCs.
Reading Mode: This is the best choice for book reading with SPLENDID
Video intelligence Technology.
Darkroom Mode: This is the best choice for a weak ambient light
environment with SPLENDID Video intelligence Technology.
•
•
In the Standard Mode, the Saturation, SkinTone, Sharpness, and ASCR
functions are not user-configurable.
In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness, Brightness,
Contrast and ASCR functions are not user-configurable.
2. Color
Select the image color you like from this function.
VN248
Splendid
Color
Brightness
Contrast
100
80
Image
Saturation
Color Temp.
50
User Mode
Natural
Input Select
System Setup
Skin Tone
Move
Menu
Exit
•
Brightness: The adjusting range is from 0 to 100. The
button is
also a hotkey to activate this function.
•
•
•
Contrast: The adjusting range is from 0 to 100.
Saturation: The adjusting range is from 0 to 100.
Color Temp.: Contains three preset color modes (Cool, Normal, Warm)
and one User Mode.
•
Skin Tone: Contains three color modes including Reddish, Natural, and
Yellowish.
3-2
Chapter 3: General Instruction
•
In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0 ~ 100.
3. Image
You can adjust the image Sharpness, Trace Free, Aspect Control,
ASCR, Position (VGA only), and Focus (VGA only) from this main
function.
VN248
Splendid
Color
Sharpness
0
60
Trace Free
Aspect Control
Full
Image
Vividpixel
25
Input Select
OFF
ASCR
System Setup
Position
Focus
Move
Menu
Exit
•
•
Sharpness: Adjusts the picture sharpness. The adjusting range is from 0
to 100.
Trace Free: Speeds up the response time by Over Drive technology. The
adjusting range is from lower 0 to faster 100.
•
•
Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”,“Overscan”.
Vividpixel: ASUS Exclusive Technology that brings lifelike visuals for
crystal-clear and detail-oriented enjoyment. The adjusting range is from
0 to 100.
•
•
ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function.
Position: Adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100
(Only available for VGA input).
•
Focus: Reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100 (Only available for VGA input).
•
•
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
ASUS LCD Monitor VN248 Series
3-3
4. Input Select
Select the input source from VGA, HDMI / MHL-1 or HDMI / MHL-2
input signal.
VN248
Splendid
Color
VGA
HDMI / MHL-1
HDMI / MHL-2
Image
Input Select
System Setup
Move
Menu
Exit
5. System Setup
Adjusts the system configuration.
VN248
Splendid Demo Mode
OFF
50
Splendid
Color
Volume
ECO Mode
OSD Setup
Language
Key Lock
OFF
Image
Input Select
System Setup
English
Information
All Reset
Move
Menu
Exit
•
•
Splendid Demo Mode: Activate the demo mode for the Splendid
function.
Volume: Adjust the earphone or speaker output volume level. The
adjusting range is from 0 to 100.
•
•
ECO Mode: Activate the ecology mode for power saving.
OSD Setup: Adjusts the horizontal postition (H-Position), vertical
position (V-Position), OSD Timeout, DDC/CI, and Transparency of the
OSD screen.
•
Language: Select OSD language. The selections are: English, French,
German, Spanish, Italian, Dutch, Russian, Traditional Chinese,
Simplified Chinese, Japanese, Persian, Thai, Indonesian, Poland,
Turkey, Portugal, Czech, Croatia, Hungary, Romania, and Korean.
•
Key Lock: To disable all function keys. Press the MENU button over five
seconds to cancel the key lock function.
•
•
Information: Displays the monitor information.
All Reset: Selects “Yes” to revert all settings to the factory default mode.
3-4
Chapter 3: General Instruction
3.2
Specifications
Model
VN248H
23.8” W (60.45 cm)
1920 x 1080
250cd/m2
Panel Size
Max. Resolution
Brightness (Typ.)
Intrisinc Contrast Ratio (Typ.)
Viewing Angle (CR≤10)
Display Colors
1000:1
178°(V); 178°(H)
16.7 M
Response Time (Typ.)
D-Sub input
5 ms (Gray to Gray)
Yes
HDMI input
Yes
Power ON Consumption
Speaker
35 W
Yes
Earphone
Yes
Power saving mode
Power off mode
Tilt
< 0.5 W
< 0.5 W
-5° ~ +20°
VESA Wall Mounting
Phys. Dimension (WxHxD)
Box Dimension (WxHxD)
Net Weight (Esti.)
Gross Weight (Esti.)
Voltage Rating
Yes (100mm x 100mm)
554.5 x 393 x 194.2 mm
610 x 476 x 130 mm
4.0 kg
6.1 kg
AC 100~240V(Built-in)
*Specifications are subject to change without notice.
ASUS LCD Monitor VN248 Series
3-5
3.3
Troubleshooting (FAQ)
Problem
Possible Solution
button to check if the monitor is in the
Power LED is not ON
•
•
Press the
ON mode.
Check if the power cord is properly connected to
the monitor and the power outlet.
The power LED lights amber and
there is no screen image
•
•
•
•
Check if the monitor and the computer are in the
ON mode.
Make sure the signal cable is properly connected
the monitor and the computer.
Inspect the signal cable and make sure none of the
pins are bent.
Connect the computer with another available
monitor to check if the computer is properly
working.
Screen image is too light or dark
•
Adjust the Contrast and Brightness settings via
OSD.
Screen image is not centered or
sized properly
•
•
Press the
button for two seconds to
automatically adjust the image.
Adjust the H-Position or V-Position settings via
OSD.
Screen image bounces or a wave
pattern is present in the image
•
•
Make sure the signal cable is properly connected to
the monitor and the computer.
Move electrical devices that may cause electrical
interference.
Screen image has color defects
(white does not look white)
•
Inspect the signal cable and make sure that none of
the pins are bent.
•
•
Perform Reset via OSD.
Adjust the R/G/B color settings or select the Color
Temperature via OSD.
Screen image is blurry or fuzzy
•
Press the
button for two seconds to
automatically adjust the image (for VGA mode
only).
•
•
Adjust the Phase and Clock settings via OSD.
No sound or sond is low
Make sure the audio cable is properly connected to
the monitor.
•
•
Adjust the volume settings of both your monitor and
computer.
Make sure the computer sound card driver is
properly installed and activated.
3-6
Chapter 3: General Instruction
3.4
Supported Timing List
VESA / IBM Modes Support Timing
Resolution
640 x 350
640 x 480
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
Refresh Rate
Horizontal Frequency
31.469KHz
31.469KHz
35KHz
70Hz
60Hz
67Hz
75Hz
70Hz
56Hz
60Hz
72Hz
75Hz
60Hz
60Hz
70Hz
75Hz
75Hz
60Hz
60Hz
60Hz
60Hz
75Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
37.5KHz
31.469KHz
35.156KHz
37.879KHz
48.077KHz
46.875KHz
31.02KHz
48.363KHz
56.476KHz
60.023KHz
67.5KHz
44.772KHz
49.702KHz
60KHz
63.981KHz
79.976KHz
47.712KHz
55.935KHz
65.29KHz
64.674KHz
67.5KHz
800 x 600
848 x 480
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 800
1280 x 960
1280 x 1024
1280 x 1024
1366 x 768
1440 x 900
1680 x 1050
1680 x 1050
1920 x 1080
1920 x 1080
66.587KHz
HDMI 1.3 CEA-861 Formats Supported Timing
Resolution
640 x 480P
720 x 480P
Refresh Rate
59.94 / 60Hz
59.94 / 60Hz
50Hz
Horizontal Frequency
31.469 / 31.5KHz
31.469 / 31.5KHz
31.25KHz
720 x 576P
1280 x 720P
1280 x 720P
1440 x 480P
1440 x 576P
1920 x 1080i
1920 x 1080i
1920 x 1080P
1920 x 1080P
1920 x 1080P
50Hz
37.5KHz
59.94 / 60Hz
59.94 / 60Hz
50Hz
50Hz
59.94 / 60Hz
30HZ
44.955 / 45KHz
31.469 / 31.5KHz
31.25KHz
28.125KHz
33.716 / 33.75KHz
33.75KHZ
50Hz
59.94 / 60Hz
56.25KHz
67.433 / 67.5KHz
* The modes not listed in the above tables may not be supported. For optimal resolution, we
recommend that you choose a mode listed in the above tables.
ASUS LCD Monitor VN248 Series
3-7
|