®
EPSON Stylus C80WN
2
Connect the Print Server
Slide the print server into the base and press firmly.
1
Quick Start
Quick Start
Follow these instructions if you’re an advanced Windows user and your network has a wireless access
point without WEP encryption. This includes wired networks that have wireless access points. For
®
more detailed instructions and other types of networks (including Macintosh ) see your Setup and
Installation book.
Turn off the printer. Then connect the parallel cable
to the printer and print server.
2
1
Unpack and Set Up the Printer
Take everything out of the box.
1
printer software
CD-ROM
Connect the power supply to the print server and
plug in the AC adapter. Both the green and yellow
lights come on and then go out.
3
print server base
print server
Setup and
Installation
Printer Basics
paper support
Turn on the printer.
4
5
ink cartridges
parallel cable
printer
print server
power supply
printer power cord
test button
To test the connection, press the test
button for one second and release it.
The status page prints.
Remove all the tape and packing material from the printer, as shown.
2
3
Make sure you follow all the
Safety Instructions in Printer Basics
and Setup and Installation.
If the status page doesn’t print,
see page 41 in Setup and Installation.
Insert the paper support.
3
Install the Software
Make sure the wireless mode for your computer
is set to Infrastructure and WEP encryption is disabled.
1
For instructions, see the documentation for your
wireless adapter.
Plug in the printer and turn it on. The green
Lower the output tray and open the cover.
power light flashes.
4
5
Note your computer’s IP address. You can view the
address by running ipconfig (Windows XP/2000/NT)
or winipcfg (Windows Me/98/95). If you need
instructions, see page 52 in Setup and Installation.
2
Keep ink cartridges out of the reach of children.
If ink gets on your skin, wash the area thoroughly
with soap and water. If ink gets in your eyes, flush
them immediately with water.
Insert your printer CD-ROM.
3
Shake each ink cartridge, then unwrap it.
6
7
Double-click Install EPSON Stylus C80WN Printer
Driver and follow the instructions on the screen.
4
Insert each cartridge into its holder until the cartridge clicks
into place.
When you see this window, click Stop searching.
Then follow the instructions on the screen
to register your printer.
5
Don’t remove the cartridge labels, or ink may leak.
Double-click Install C80WN Utilities on the
EPSON Installation Program screen.
6
7
Press the
Wait while the ink charges.
ink button and close the printer cover.
8
9
If you see a message about installing the Java
Runtime Environment click Continue and
follow the instructions on the screen.
When you see this window, click Next.
Then follow the instructions on the back
of this sheet.
8
Load paper and pull out the output tray extensions.
To check the printer, first turn it off. Then hold down the
paper button as you press and release the
turn it back on. The test page prints.
power button to
If the test page doesn’t print, see the Problem Solving
chapter in Printer Basics.
Turn over
|